Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	620 × 650 × 1000 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight	160 kg
Static seat verification load	91 kg
Backrest verification force	136 kgf
Sled-frame cyclic endurance target	120,000 loading cycles
Arm downward verification load	68 kgf
Floor glide bearing area	4 glides at 200 mm2 each
Seating capacity	1 adult occupant
Product net weight	14 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Black smooth faux-leather surface with visible side seams
Back upholstery	Black smooth upholstered face over a padded rectangular back panel
Seat cushion	80 mm molded polyurethane foam pad with fabric underlay
Back cushion	60 mm polyurethane padding bonded to a rigid load-bearing back shell
Back support shell	8 mm molded plywood or polymer inner panel
Seat support board	10 mm molded plywood or composite seat deck
Sled base	25 mm black powder-coated welded steel tube with continuous floor runners
Arm supports	22 mm bent black steel tubes connected to frame and arm pads
Arm contact pads	Black padded polymer or upholstered pads on horizontal steel rails
Floor glides	4 replaceable polymer end caps on the runner contact points
Finish system	Epoxy-polyester powder coating on black metal components
Joint construction	Welded tube junctions with concealed seat-deck fasteners

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed sled movement	Cantilever runners provide limited controlled flex and no wheels
Seat height adjustment	No gas lift or height adjustment; fixed 450 mm seat height
Back support	Padded upright back provides static lumbar and thoracic support
Arm support	Integrated fixed armrests support forearms at 230 mm above the seat
Swivel function	Non-swiveling seat mounted directly to the steel sled frame
Floor protection	Four polymer glides isolate steel runner ends from the floor
Stacking limitation	Non-stacking design with fixed arms and continuous sled runners
Maintenance access	Padded upholstery is field-cleanable; glides are replaceable with screw-fit or cap-fit parts
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Conference room	Use around 760 mm meeting tables because the fixed 450 mm seat aligns with standard table height
Reception area	Place visitors facing a desk or lounge zone with stable non-rolling support
Executive office guest seating	Pair one or two units in front of an executive desk for short-to-medium meetings
Training room	Deploy in rows where quiet, wheel-free seating and easy floor cleaning are prioritized
Home office meeting corner	Use as an adult guest chair beside a workstation or writing desk
Open-plan touchdown space	Specify for hotels, banks, clinics, and consulting rooms needing durable black visitor seating
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139 seating strength and durability	Specify Level 2 strength and durability for non-domestic conference and visitor seating
EN 1022 seating stability	Require front, rear, and side stability verification on the finished sled-base chair
EN 1728 furniture test methods	Use standardized seat, back, arm, and leg loading methods for laboratory verification

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.2 furniture mechanical test	Apply chair rearward stability and back-strength acceptance testing under this furniture test framework

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.2 furniture mechanical test: Apply chair rearward stability and back-strength acceptance testing under this furniture test framework;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · SLD-CONF-BLK-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · SLD-CONF-BLK-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · SLD-CONF-BLK-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Black Faux Leather Sled-Base Conference Chair is a purpose-built visitor and meeting seat with a clean, structured silhouette. Model SLD-CONF-BLK-01 and offered without a brand label, it features a padded rectangular back, a tailored seat with visible side seams, and integrated fixed armrests. Its black smooth upholstery gives the chair a consistent professional appearance, while the continuous black sled frame creates an open, orderly look suited to formal and semi-formal interiors. The non-swiveling seat is fixed directly to the frame, and the cantilever runners provide limited controlled flex without casters. The armrests run along both sides, leaving a clear width of 540 mm between them and supporting forearms at 230 mm above the seat. Overall dimensions are 620 x 650 x 1000 mm, with a fixed seat height of 450 mm. Construction combines upholstered comfort with a rigid support structure. The seat uses a 90 mm finished cushion built on an 80 mm molded polyurethane foam pad with fabric underlay, set over a 10 mm molded plywood or composite deck. The back has a 70 mm padded finish using 60 mm polyurethane padding bonded to a load-bearing shell, with an 8 mm molded plywood or polymer inner panel. A 240 mm lumbar support zone contributes to the upright back, which is intended to provide static lumbar and thoracic support. The frame is made from 25 mm black powder-coated welded steel tube with continuous floor runners, while the arm supports use 22 mm bent black steel tubes connected to the frame and padded contact pads. Four polymer glides protect flooring by separating the steel runner ends from the surface. The chair is designed for stable, wheel-free seating rather than movement or storage flexibility. It has no gas lift or height adjustment, does not swivel, and is non-stacking due to its fixed arms and continuous runners. It is intended for one adult occupant, with a recommended user weight of 160 kg. The fixed seat height pairs naturally with 760 mm meeting tables. These characteristics make it suitable for conference rooms, reception areas, executive office guest positions, training rooms arranged in rows, home office meeting corners, and open-plan touchdown spaces in hotels, banks, clinics, and consulting settings. It is especially appropriate where quiet support, straightforward floor cleaning, and a durable black visitor chair are preferred. Procurement planning should account for the chair’s fixed configuration and deliberate lack of mobility. Buyers seeking stackable, height-adjustable, or rolling seating should consider other models. Each set ships in two cartons, with a packaged gross weight of 23 kg and a reference assembly time of 40 minutes. The reference carton dimensions are 850 x 420 x 720 mm, with a carton volume of 0.26 cubic meter per set; indicative loading is 135 sets in a 20GP container at 85 percent space utilization.

Black Faux Leather Sled-Base Conference Chair Specifications

Suppliers and stock