| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1600 mm diameter x 750 mm height | |
|---|---|---|
| Integrated lazy Susan diameter | 900 mm | |
| Tabletop total thickness | 20 mm | |
| Pedestal base footprint | 1000 mm diameter | |
| Central base recess opening width | 200 mm | |
| Under-table knee clearance height | 680 mm | |
| Per diner place setting width | 837 mm | |
| Tabletop overhang from base edge | 300 mm | |
| Lazy Susan thickness | 12 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 90 kg | |
|---|---|---|
| Tabletop distributed static load capacity | 150 kg | |
| Recommended seating capacity | 6 diners | |
| Structural warranty period | 3 years | |
| Finish scratch resistance rating | Grade 2 | |
| Tabletop heat resistance temperature | 180 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop panel | 20mm thick polished sintered stone, matte light neutral finish | |
|---|---|---|
| Integrated lazy Susan panel | 12mm thick matching sintered stone, flush-fit rotating top | |
| Pedestal base construction | Solid hardwood frame with MDF core, light beige wood veneer finish | |
| Internal base reinforcement | 1.5mm thick powder-coated steel internal frame | |
| Lazy Susan rotating mechanism | Zinc alloy bearing with nylon glides, 360° rotation hardware | |
| Base bottom foot pads | 8mm thick non-slip rubber floor protectors | |
| Surface finish coating | Matte UV-cured lacquer, stain-resistant top coat | |
| Connector hardware | M8 steel hex bolts and lock washers, zinc plated | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Lazy Susan rotation | 360° smooth manual rotation, no fixed lock positions | |
|---|---|---|
| Table configuration | Fixed non-extendable circular top, no leaf insertion mechanism | |
| Base stability design | Wide split pedestal footprint, anti-tip geometry for 6-seat layout | |
| Surface maintenance | Non-porous sintered stone top, wipe-clean stain-resistant surface | |
| Assembly requirement | 3-point bolted connection between tabletop, bearing, and pedestal | |
| Floor protection | Height-adjustable rubber foot pads, 10mm adjustment range | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential villa dining room | Fits formal dedicated dining spaces for family meals and guest entertainment | |
|---|---|---|
| Private restaurant dining booth | Suitable for high-end commercial private dining rooms serving 6 guests | |
| Contemporary new Chinese interior schemes | Complements light-toned, minimalist oriental design palettes and millwork | |
| Formal banquet seating setup | Supports full place settings and shared serving dishes via central turntable | |
| Open-plan dining area in luxury apartments | Centered pedestal design allows flexible chair arrangement around full perimeter |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture surface resistance to cold liquids, applicable to tabletop finish |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base structural integrity | |
|---|---|---|
| GB 18584-2001 | Formaldehyde emission limit for interior decoration wooden furniture, applicable to veneer base | |
| GB/T 4893.4-2013 | Surface wear resistance test for furniture finishes, applicable to table and base coatings |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base structural integrity; 2. GB 18584-2001: Formaldehyde emission limit for interior decoration wooden furniture, applicable to veneer base; 3. GB/T 4893.4-2013: Surface wear resistance test for furniture finishes, applicable to table and base coatings; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
