Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1800 × 750 × 1850 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per unit	48 kg
Static load per seat	150 kg
Total unit static load capacity	450 kg
Seating capacity	3 users
Foot adjustment range	15 mm
Recommended daily use duration per seat	12 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Structural frame	1.5mm thick powder-coated cold-rolled steel tube
Seat and back upholstery	1.2mm thick matte polyurethane (PU) leather
Seat cushion core	40mm high-density polyurethane foam, 45kg/m³ density
Backrest cushion core	30mm high-density polyurethane foam, 40kg/m³ density
Headrests	25mm molded PU foam wrapped in matching PU leather
Armrests	30mm thick solid hardwood with dark walnut finish
Armrest supports	1.2mm thick chrome-plated bent steel
IV poles	20mm diameter chrome-plated solid steel rods with dual hooks
Leveling feet	Injection-molded nylon with non-slip rubber pads
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed upright seating position	105-degree fixed backrest angle for upright posture during IV infusion
Integrated IV support	1 dual-hook IV pole per seating position, fixed to chair frame between seats
Leveling adjustment	Threaded adjustable feet on all 4 base legs for stability on uneven floors
Interconnected ganged seating	Rigid steel beam connecting all 3 seats to prevent shifting and tipping
Stain-resistant seating surface	Non-porous PU upholstery allows disinfection with standard medical cleaners
Armrest support	Dual side armrests for each seat (outer positions have one side armrest) to support arms during IV line placement
Fixed head support	Raised contoured headrest per seat to reduce neck fatigue during long infusion sessions
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Hospital outpatient infusion rooms	Dedicated IV pole per seat supports extended seated infusion sessions for patients
Community health clinic waiting areas	Durable easy-clean surfaces suit high-traffic public healthcare environments with frequent disinfection
Vaccination and blood collection centers	Fixed armrests provide stable arm support for needle insertion and post-procedure rest
Emergency department observation zones	Ganged fixed configuration prevents rearrangement and supports stable patient monitoring
Enterprise medical station waiting areas	Neutral teal and metallic finish blends with professional clinical interior design
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139:2013	Strength, durability and safety requirements applicable for non-domestic public seating
EN 1022:2018	Stability test method applicable for fixed upright seating furniture
EN 12520:2015	Mechanical safety requirements applicable for furniture used in public healthcare environments

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements applicable for metal furniture structural safety and stability
GB 18584-2001	Limit of harmful substances applicable for interior decoration wooden furniture components
GB/T 16799-2008	Performance requirements applicable for polyurethane leather used in furniture upholstery

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements applicable for metal furniture structural safety and stability;
2. GB 18584-2001: Limit of harmful substances applicable for interior decoration wooden furniture components;
3. GB/T 16799-2008: Performance requirements applicable for polyurethane leather used in furniture upholstery;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · MED-INF-3SEAT-PU-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · MED-INF-3SEAT-PU-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · MED-INF-3SEAT-PU-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

This 3-seat medical infusion waiting chair is purpose-built for high-traffic clinical public seating applications, presenting a streamlined, ganged linear layout configured to support three users in adjacent fixed positions. Each seat integrates a raised contoured headrest, dual side armrests (with outer positions featuring a single side armrest), and dedicated chrome-plated IV poles positioned between seats to create an organized, patient-focused seating array. The design balances clinical functionality with a polished professional aesthetic, featuring a neutral teal and metallic finish that aligns with standard healthcare interior palettes. Constructed for long-term high-frequency use, the chair uses a rigid 1.5mm thick powder-coated cold-rolled steel tube frame connected by a solid steel beam across all three seats to eliminate shifting and tipping risk. Seating surfaces are upholstered in 1.2mm matte non-porous polyurethane leather, with seat cushions built from 40mm high-density foam, backrests from 30mm supportive foam, and headrests from 25mm molded PU foam wrapped in matching upholstery. Armrests are crafted from 30mm thick dark walnut finished solid hardwood, mounted on 1.2mm chrome-plated bent steel supports. Chrome-plated solid steel IV poles fitted with dual hooks attach directly to the frame between seats, while threaded injection-molded nylon leveling feet with non-slip rubber pads on all four base legs accommodate uneven flooring. Functional design elements are tailored to clinical care needs: the 105-degree fixed backrest angle supports upright posture appropriate for infusion sessions, individual contoured headrests reduce neck fatigue during extended seated stays, and stable armrests provide secure support for IV line placement, vaccination, or blood collection procedures. The non-porous PU upholstery resists staining and tolerates cleaning with standard medical disinfectants, supporting strict hygiene protocols. Each seat supports a static load of 150kg, with a total unit static load capacity of 450kg, and is rated for 12 hours of daily use per position. This seating solution is well suited for hospital outpatient infusion rooms, community health clinic waiting areas, vaccination and blood collection centers, emergency department observation zones, and on-site enterprise medical station waiting areas. When planning procurement, note that each unit ships in two cartons, requires 40 minutes of on-site assembly per set, and includes 15mm of foot adjustment range for floor leveling. The ganged fixed configuration removes the need for ongoing seating rearrangement in high-traffic public spaces, supporting consistent layout management for clinical teams.

3-Seat Medical Infusion Waiting Chair with IV Poles and Headrests Specifications

Suppliers and stock