纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 680 × 1030 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	18 kg
Recommended user weight capacity	160 kg
Recommended occupant height range	190 cm
Gas-lift static load rating	160 kg
Back tilt range	115degrees
Seat height adjustment stroke	60 mm
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rate	42%
Fabric abrasion acceptance target	50,000 Martindale cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan full-grain or corrected leather face with leather-match sides, tailored over padded cushion
Back upholstery	Tan leather or leather-match cover over contoured foam panel
Seat cushion	90 mm polyurethane foam with 45 kg/m3 density target over shaped load-bearing board
Back cushion	70 mm polyurethane foam with 35 kg/m3 density target over rigid back carrier
Internal seat frame	15 mm molded plywood or steel-reinforced composite seat board with steel mounting plates
Back support frame	18 mm molded plywood carrier or 1.5 mm steel back bracket connected to mechanism
Arm pads	Tan upholstered padding over rigid board with softly rounded front edge
Arm supports	Polished die-cast aluminum or stainless-steel angular supports with bright finish
Gas lift	Chrome-plated steel telescopic gas cylinder with 50 mm outer tube
Tilt mechanism	Black powder-coated steel mechanism plate with side lever and rear tension knob
Five-star base	Polished die-cast aluminum five-star base with five radiating legs
Casters	Black nylon twin-wheel casters with steel axle and 60 mm wheel diameter

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel	Central gas-lift swivel enables full 360-degree seat rotation for desk access and egress
Pneumatic seat height	60 mm upward travel controlled by the visible under-seat lever, giving 500 mm seat height
Synchronized or center tilt	Backrest reclines to 115 degrees through the under-seat steel mechanism with upright 90-degree lock position
Tilt tension adjustment	Rear rotary knob adjusts spring resistance for user weights up to 160 kg
Fixed arm support	Padded armrests remain fixed at 230 mm above the seat to support forearms during keyboard work
Mobile caster base	Five 60 mm twin-wheel casters provide rolling movement on hard floors and low-pile carpet
Lumbar contact zone	Contoured lower-back pad provides passive lumbar support without separate adjustable lumbar
Recline lock	Multi-position mechanism lock allows upright work and reclined rest settings
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private executive office	Fits behind a 2000 mm executive desk where tan upholstery and polished metal create a formal business appearance
Open-plan workstation	Suitable for managers requiring swivel access, 500 mm desk-height compatibility, and mobile caster movement
Meeting or conference room	Pairs with boardroom tables for daily meetings up to several hours using passive lumbar support and fixed armrests
Home office	Suitable for a dedicated home office with hard flooring or low-pile carpet and a standard 760 mm desk
Reception or consulting room	Provides visitor or consultant seating with easy movement and a refined leather-like appearance
Procurement configuration	Recommended in batches with matching tan guest chairs for private offices and director suites
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1 office chair dimensional safety applicability	Use to assess seating dimensions, stability boundaries, and ergonomic geometry
EN 1335-2 office chair safety requirements applicability	Applicable standards and test results require confirmation
EN 1335-3 office chair test methods applicability	Use laboratory strength, durability, and fatigue test methods for procurement inspection
EN 1021-1 upholstered seating ignited cigarette applicability	Specify when upholstered seating requires cigarette-ignition resistance testing

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 office chair safety applicability	Applicable standards and test results require confirmation
ANSI/BIFMA X5.4 lounge and public seating applicability	Consider only if the chair is deployed in heavy public or conference lounge areas

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357 furniture mechanical testing applicability	Apply chair strength and durability test methods to back, seat, arms, and base structures
GB 17927-2022 upholstered furniture anti-dumping applicability	Verify ignitability and anti-dumping components if the chair is supplied for regulated projects

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357 furniture mechanical testing applicability：Apply chair strength and durability test methods to back, seat, arms, and base structures；
2. GB 17927-2022 upholstered furniture anti-dumping applicability：Verify ignitability and anti-dumping components if the chair is supplied for regulated projects；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OFC-MB-TAN-AL5

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OFC-MB-TAN-AL5

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OFC-MB-TAN-AL5打开导出工具

页面快速操作

发布采购询价

产品描述

The Mid-Back Tan Leather Executive Swivel Chair, model OFC-MB-TAN-AL5, presents a formal executive profile with warm tan upholstery, a mid-height back, fixed padded arms, and a bright polished metal five-star base. Its angular arm supports and tailored cushioning give the chair a structured business appearance, while the contoured back and rounded arm-pad fronts soften the visual line. Overall dimensions are 650 by 680 by 1030 mm, with 540 mm between the armrests, making it suitable for a substantial executive desk without appearing oversized. The unbranded design supports coordinated installations where a consistent tan and polished-metal finish is preferred. Construction combines upholstered comfort with durable load-bearing components. The seat uses tan full-grain or corrected leather on the face with leather-match sides, fitted over a 90 mm polyurethane foam cushion at a 45 kg per cubic meter density target and a shaped support board. The back uses tan leather or leather-match over a contoured 70 mm foam panel and rigid carrier. Internal framing is 15 mm molded plywood or steel-reinforced composite with steel mounting plates; the back frame is 18 mm molded plywood or a 1.5 mm steel bracket. Arm supports are polished die-cast aluminum or stainless steel, the gas lift is chrome-plated steel with a 50 mm outer tube, and the mechanism plate is steel. Twin-wheel nylon casters complete the base. The chair weighs 18 kg and carries a recommended user weight capacity of 160 kg, matched by the gas-lift static load rating. Maximum recommended occupant height is 190 cm. Functionality is centered on daily desk use. A central gas lift provides 360-degree swivel and 60 mm of pneumatic seat-height travel, reaching a 500 mm seat height. The steel under-seat mechanism offers synchronized or center tilt, reclining to 115 degrees with a locked upright position at 90 degrees. A rear rotary knob adjusts tilt tension for users up to 160 kg. Fixed armrests sit 230 mm above the seat for forearm support during keyboard work, and a 240 mm high contoured lumbar contact zone provides passive lower-back support. Five 60 mm twin-wheel casters allow movement on hard floors and low-pile carpet. The chair fits private executive offices, including placement behind a 2000 mm executive desk, as well as manager workstations in open-plan areas. It is also appropriate for meeting rooms, home offices paired with a standard 760 mm desk, and reception or consulting spaces that require a refined leather-like appearance. For conference use, the passive lumbar support and fixed arms suit meetings lasting several hours. Procurement teams should note that each set ships in two cartons, with packaged gross weight of 23 kg, carton dimensions of 850 by 420 by 720 mm, and reference assembly time of 40 minutes. Carton volume is 0.26 cubic meters per set, and an indicative 20GP container loads 135 sets at 85 percent space utilization. Batch ordering with matching tan guest chairs is recommended for private offices and director suites.

Mid-Back Tan Leather Executive Swivel Chair Specifications

供应商与现货