纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 650 × 1000 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	14 kg
Recommended user weight capacity	160 kg
Recommended occupant count	1 person
Cantilever static proof-load target	640 kg
Backrest horizontal pull test target	68 kg sustained for 1 hour
Seat impact durability target	100,000 cycles
Back cyclic fatigue target	120,000 cycles
Floor glide compressive load per foot	45 kg
Warranty period	5 years for frame and 2 years for upholstery
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Gray leather-look upholstery with stitched perimeter, visual material grade requiring BOM confirmation
Back upholstery	Gray upholstered face divided by a vertical seam and diagonal lumbar contour
Seat cushion	80 mm molded polyurethane foam, 45 kg/m3 density target and 40% rebound target
Back cushion	60 mm cut or molded polyurethane foam, 35 kg/m3 density target
Internal seat support	12 mm plywood or equivalent molded composite board bonded to cushion
Back inner support	8 mm structural board or steel-reinforced polymer panel
Cantilever frame	25 mm chrome-plated steel tube, 1.5 mm wall thickness target
Frame finish	Polished chrome plating with 0.25 micron nickel-chrome finish target
Arm pads	Gray upholstered pads mounted over the curved chrome arm tube
Floor glides	Black injection-molded polymer glides with four floor contact points
Fasteners	Steel bolt-and-nut frame joints with zinc-plated finish target
Upholstery seam	Stitched assembly with 8 mm seam pitch target and color-matched thread

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed-height seating	450 mm fixed seat height for conference and visitor use; no gas lift is present
Cantilever flex	Continuous tubular steel frame provides controlled rearward flex and returns to neutral
Arm support	Fixed integrated armrests provide forearm support at 680 mm above floor
Non-swiveling base	Welded sled frame keeps the seat orientation fixed and prevents rotation
Floor protection	Four black polymer glides distribute load and reduce scratching on hard floors
Stacking capability	Non-stacking single chair construction
Back support	Tall contoured back with central seam and diagonal lumbar shaping supports upright posture
Maintenance access	Removable upholstery covers are not visible, so cleaning should use surface-compatible upholstery methods
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Use at meeting tables with 750 mm work heights because the fixed seat height is 450 mm
Executive reception	Suitable for visitor seating in offices and reception areas due to gray upholstery and polished frame
Training room	Suitable for medium-duty daily training sessions with 100,000-cycle seat durability target
Guest seating across desk	Appropriate for short-to-medium visitor meetings lasting 120 minutes
Hard-floor office environment	Recommended for tile, wood, or vinyl floors when fitted with the four polymer glides
Bulk procurement standardization	Use identical gray units for projects requiring coordinated visitor and conference seating
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Use Level 2 strength, durability, and safety requirements for non-domestic seating
EN 1022 applicability	Use stability test method for forward, rearward, and side loading
EN 12520 applicability	Use safety, strength, and stability requirements for non-domestic furniture seating

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Apply chair mechanical and durability test methods for back, leg, and arm loading
GB/T 10357.3 applicability	Apply chair strength and durability requirements to seat impact and cyclic back loading
GB 18584 applicability	Specify indoor wooden-furniture furniture-decorating material limit-value review for any board components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Apply chair mechanical and durability test methods for back, leg, and arm loading；
2. GB/T 10357.3 applicability：Apply chair strength and durability requirements to seat impact and cyclic back loading；
3. GB 18584 applicability：Specify indoor wooden-furniture furniture-decorating material limit-value review for any board components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CF-GRY-SLED-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CF-GRY-SLED-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CF-GRY-SLED-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Gray Upholstered Cantilever Conference Chair presents a structured, professional seating solution for meeting, reception, and visitor environments. Its tall contoured backrest features a central vertical seam and diagonal lumbar shaping, while the gray upholstery creates a coordinated appearance suited to neutral office interiors. Fixed integrated armrests follow the line of the polished chrome frame, and the continuous sled base gives the chair a clean, open silhouette. The model CF-GRY-SLED-01 is supplied unbranded, making it suitable for projects where a consistent standard chair is preferred without prominent manufacturer identification. Construction combines cushioned upholstery with a tubular steel cantilever frame. The seat uses gray leather-look upholstery with a stitched perimeter over molded polyurethane foam and an internal plywood or equivalent molded composite support. The upholstered back uses cut or molded foam over a structural board or steel-reinforced polymer panel. The frame is formed from chrome-plated steel tube with a polished finish, and black polymer floor glides are fitted at the base. The arm pads are gray upholstered pads mounted over the curved chrome arm tubes. Material grade for the visual upholstery should be confirmed through the bill of materials before final specification. The chair is designed for fixed-height, non-swiveling use. Its fixed seat height supports conference and visitor applications without a gas lift, while the welded sled frame maintains the seat orientation. The cantilever structure is intended to provide controlled rearward flex and return to a neutral position. The shaped back includes a defined lumbar support zone, and the integrated armrests provide fixed forearm support. Four polymer glides help distribute load and reduce scratching on tile, wood, or vinyl floors. The chair is a non-stacking, single-occupant product. Suitable settings include conference rooms paired with standard meeting tables, executive reception areas, training rooms, and guest seating across desks. Its matching gray finish and polished frame also support bulk standardization across multiple rooms or floors. The seating is appropriate for short-to-medium visitor meetings and medium-duty daily training use. Procurement planning should account for delivery in two cartons per set, a packaged gross weight of 23 kilograms, and an indicated assembly time of 40 minutes per set. Buyers should confirm upholstery grade, foam and plating specifications, site assembly arrangements, and floor compatibility. The chair’s fixed height, integrated arms, and non-stacking form should be checked against table dimensions, storage plans, and accessibility requirements before order confirmation.

Gray Upholstered Cantilever Conference Chair with Chrome Sled Frame Specifications

供应商与现货