商品供应商Gray Upholstered Executive Conference Chair with Cantilever Base，1.2 mm gray polyurethane-coated fabric or leather-grain surface, tailored over rounded cushion with stitched perimeter
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 640 × 680 × 1010 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Net weight | 15 kg | |
|---|---|---|
| Recommended occupant load | 120 kg | |
| Static proof load on seat | 160 kg | |
| Backrest backward static load | 90 kgf | |
| Armrest downward load | 60 kgf per arm | |
| Cantilever flex fatigue rating | 100,000 loading cycles | |
| Floor glide sliding rating | 30,000 cycles | |
| Recommended daily occupancy duration | 8 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Seat upholstery | 1.2 mm gray polyurethane-coated fabric or leather-grain surface, tailored over rounded cushion with stitched perimeter | |
|---|---|---|
| Back upholstery | 1.2 mm gray upholstery over contoured back panel with vertical side returns and visible edge seams | |
| Arm pads | Integrated gray upholstered pads with 20 mm polyurethane foam over rigid arm supports | |
| Seat cushion foam | 45 kg/m3 polyurethane foam, 80 mm thick at front and 60 mm under-thigh profile | |
| Back padding | 35 kg/m3 polyurethane padding, 40 mm thick on lumbar area and 25 mm at upper back | |
| Seat support panel | 12 mm molded plywood or engineered composite board bonded to cushion and steel mounting plate | |
| Back support panel | 10 mm molded plywood or reinforced polypropylene shell with side bolsters | |
| Cantilever frame | 25 mm diameter chrome-plated welded steel tube with continuous twin-sled U-bend construction | |
| Frame finish | 0.25 mm nickel and chrome plating over polished steel tube, bright mirror finish | |
| Floor glides | Black polymer non-marking glides, 30 mm diameter, mechanically fitted to each runner end | |
| Mounting hardware | M8 steel bolts and welded steel support brackets connect seat shell to cantilever frame | |
| Seam construction | Bonded polyester thread with 80 mm seam pitch and matched gray edge piping |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Fixed cantilever support | Continuous steel sled flexes slightly under load but provides 0 mm height adjustment and 0-degree swivel | |
|---|---|---|
| Fixed back posture | Back support remains locked at 100 degrees from the seat plane with no tilt or recline mechanism | |
| Integrated arm support | 220 mm arm height supports forearms during meetings and assists entry and exit at both sides | |
| Floor mobility | Four polymer glides allow repositioning by sliding on hard floors; no casters are installed | |
| Floor protection | 30 mm contact glides distribute chair weight and reduce scratching on wood, tile, or vinyl floors | |
| Stacking capability | Non-stacking fixed configuration with 0 chairs stackable due to enclosed cantilever profile | |
| Occupant turn behavior | Stationary base requires the user to reposition the chair manually; 360-degree seat rotation is not available | |
| Entry and exit clearance | 260 mm under-seat clearance and open sled front provide foot room without a front crossbar | |
| Backrest recline from seat plane | 100 degrees | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Boardroom conference table | Use around a 760 mm high meeting table for directors or clients, with 450 mm seat height and fixed professional posture. | |
|---|---|---|
| Executive visitor seating | Place one or two chairs in front of an executive desk for guests, using armrests and a non-rolling base for formal meetings. | |
| Meeting and training rooms | Arrange in rows or around modular tables where quiet sliding movement and uniform gray upholstery support all-day sessions. | |
| Reception and waiting areas | Use in executive lounges or reception zones where a high-back chair provides visual presence and padded comfort. | |
| Private office consultation | Pair with an executive desk for short consultations, with cantilever glides suited to hard-finish office floors. | |
| Hotel conference centers | Specify for banquet meeting rooms and boardroom suites requiring non-caster visitor chairs and chrome aesthetics. | |
| Public-sector interview rooms | Use for formal interviews where stable fixed seating, integrated arms, and durable upholstery are preferred. | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
该市场暂无标准数据。
STANDARD S2
北美市场采购验货参考 * ANSI/BIFMA 标准
美国及加拿大家具标准
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.1 |
|---|
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
该市场暂无标准数据。
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. 技术标准与检测报告由供应商在投标或采购确认阶段提供； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具