纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 680 × 980 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	14 kg
Recommended occupant load	160 kg
Static seat proof load	500 kg for 1 hour
Backrest backward load	136 kg applied to upper back
Armrest downward load	68 kg per arm
Cantilever durability	100,000 seated loading cycles
Seat foam compression set	8 percent after 22 hours at 70 degrees C
Upholstery abrasion resistance	50,000 Martindale cycles
Recommended daily occupancy duration	8 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Black 1.0 mm polyurethane-coated fabric or leather-look surface, sewn and tensioned over the cushion.
Back upholstery	Black 1.0 mm upholstery layer formed over a padded, tapered back panel with finished perimeter piping.
Seat foam	80 mm polyurethane cushion at 45 kg/m3 density with 40 percent rebound.
Back foam	60 mm polyurethane padding at 40 kg/m3 density with 35 percent rebound.
Seat support board	12 mm molded plywood or high-density composite board anchored to four steel fixing points.
Back support board	10 mm molded plywood or formed composite panel with edge rounding before upholstery.
Armrest	Black 8 mm polyurethane pad over a 1.2 mm formed steel arm carrier, fixed to seat and back brackets.
Cantilever frame	25 mm diameter, 2.0 mm wall steel tube bent into twin U-shaped side frames with cross braces.
Frame finish	Polished chrome plating 0.25 mm thick over polished steel with welded joints ground smooth.
Floor glides	Injection-molded nylon or TPE glides 30 mm long, riveted to each rail end.
Seam construction	Bonded polyester thread with 80 mm seam pitch and reinforced stress points.
Fasteners	Zinc-plated steel M8 bolts and lock washers at arm, seat, and frame junctions.

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed seating height	450 mm seat height without lift adjustment, optimized for 720 to 760 mm conference tables.
Cantilever flex movement	Steel sled frame provides controlled vertical flex over 20 mm deflection under 100 kg seat load.
Fixed arm support	230 mm arm height above seat provides forearm support during meetings and push-up assistance.
Stationary mobility	Four floor glides and twin continuous rails keep the chair non-swiveling and non-castered for orderly table placement.
Stacking function	Non-stacking design with fixed back and arms; chairs should be stored upright rather than nested.
Floor protection	Replaceable TPE glides reduce scratching on wood, tile, and hard conference-room flooring.
Entry and egress	Open front sled frame provides 350 mm knee clearance and no center pedestal obstruction.
Back support	520 mm fixed mid-back panel supports the thoracic region through a 10-degree reclined back angle.
Maintenance access	M8 bolted arm and seat attachments allow upholstery or glide replacement without frame replacement.
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Boardroom seating	Place 8 to 20 chairs around a 750 mm high conference table for formal meetings, using fixed glides to maintain aligned seating rows.
Visitor and guest seating	Use in executive reception or meeting rooms where a quiet, non-rolling chair conveys stable guest seating and easy entry.
Training room configuration	Arrange in rows or classroom layouts for 1 to 8 hour sessions, pairing with tablet-free tables where orderly positioning is preferred.
Manager meeting area	Position 2 chairs opposite a desk for short discussions, with 450 mm seat height matching standard office desk height.
Open-office collaboration zone	Group around a compact meeting table for project reviews; the sled base simplifies placement without wheeled movement.
Hotel or conference center use	Specify for function rooms requiring 50,000-cycle abrasion-resistant black upholstery and replaceable floor glides.
Public reception counter waiting area	Use in restrained waiting zones where stationary chairs prevent unintended rolling and support a uniform professional appearance.
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CVC-BLK-SLED-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CVC-BLK-SLED-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CVC-BLK-SLED-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Upholstered Cantilever Conference Chair with Fixed Armrests presents a structured, formal seating solution defined by its continuous sled frame, rectangular mid-back profile, and black upholstered seat and back. Fixed armrests frame the seating area, while the twin U-shaped chrome side frames and cross braces create an open, orderly silhouette suited to aligned table settings and rows. The tapered back is finished with perimeter piping, and the polished frame provides a refined contrast with the black seating surfaces. Construction combines upholstered comfort with a durable steel support system. The seat uses a 90 mm finished cushion built over an 80 mm polyurethane foam core, while the backrest has 70 mm of finished padding over a 60 mm polyurethane layer. Internal support is provided by molded plywood or formed composite boards secured to steel fixing points, with rounded back-panel edges beneath the upholstery. Armrests use black polyurethane pads on formed steel carriers fixed to seat and back brackets. The cantilever base is made from steel tube with a polished chrome plating finish, smoothly ground welded joints, and replaceable TPE floor glides. The chair is designed for stationary conference use rather than swivel or caster-based tasks. Its fixed 450 mm seat height is intended for standard conference tables, and the cantilever frame gives controlled vertical flex when occupied. Fixed armrests provide forearm support and assistance when rising, while the open front sled base offers knee clearance without a central pedestal. The non-stacking design should be stored upright, and the replaceable glides help protect wood, tile, and other hard flooring. This model is well suited to boardrooms, executive reception areas, meeting rooms, training classrooms layouts, manager discussion areas, open-office collaboration zones, hotels, and conference centers. Its non-rolling character supports neat arrangements around formal meeting tables or in rows where stable guest seating is preferred. Procurement teams should note that the product is unbranded under model CVC-BLK-SLED-01 and is supplied as one set in two cartons, with assembly required. The black finish coordinates readily with dark, neutral, or polished interior schemes, and replacement glides offer a practical maintenance advantage for high-use venues. Buyers should plan storage for non-stacking chairs and confirm delivery quantities, assembly resources, carton handling, and room layout requirements before ordering.

Black Upholstered Cantilever Conference Chair with Fixed Armrests Specifications

供应商与现货