纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	740 × 820 × 1080 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight	140 kg
Static seat verification load	280 kg
Backrest rearward pull test target	68 kg sustained load
Arm downward verification load	75 kg per arm
Net weight	19 kg
Seating capacity	1 person
Daily-use durability target	10 years commercial light-duty service
Foam indentation performance	35 kg/m3 seat foam, 70 mm compression at 40 percent
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer back and arm shell	Warm brown molded structural shell with continuous upholstered finish
Seat cushion	Padded flexible upholstery over 90 mm high-resilience foam core
Back cushioning	Layered padding over rigid load-bearing back frame
Head panel	Separate padded upper back panel with stitched horizontal seam
Arm pads	Integrated curved upholstered arm pads connected to side back panels
Load-bearing seat support	12 mm bent plywood or steel-reinforced composite seat board
Upper legs	Warm brown powder-coated or wood-finish rigid support sections
Lower legs	25 mm diameter polished chrome-finish steel tube
Foot glides	Black injection-molded polymer glides, 30 mm diameter
Underside mechanism plate	Black steel pivot or mounting plate between seat and base
Fasteners	Zinc-plated steel bolts and threaded inserts at leg and shell joints
Upholstery surface	Smooth camel-tan coated fabric or corrected-grain leather look, 1.2 mm facing thickness

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed lounge seating	Stationary seat at 430 mm height for reception and conversational seating
Integrated arm support	Continuous 190 mm arm height above seat supports forearms during relaxed posture
High-back postural support	650 mm back with separate upper head panel supports lumbar, shoulder, and head regions
Four-point stability	Four splayed legs provide a 680 x 720 mm floor footprint and non-swivel stability
Floor protection	30 mm polymer glides at each leg allow repositioning while reducing hard-floor marking
Rotation/swivel feature	360-degree return-swivel plate under seat, non-reclining
Maintenance access	Bolted leg and shell connections enable glide and fastener replacement
Stackability	Non-stacking single chair with broad splayed legs
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office lounge	Place beside a low table for informal conversations away from a formal desk
Reception and visitor area	Use in pairs or rows to create durable waiting seating with a refined visual profile
Hotel lobby or club lounge	Specify for premium lounges where stationary comfort and a polished metal leg detail are required
Meeting pod or collaboration corner	Position around a low collaborative table for 45 to 90 minute discussion seating
Private study or bedroom seating	Use as a single reading chair with 190 mm arm support and tall back cushioning
Senior living lounge	Suitable where a 430 mm seat height and arm-assisted standing position are desired
Color planning	1 standard camel-tan finish visible; procurement can request up to 6 upholstery colors and 2 leg finishes
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 contract seating	Use strength, durability, and safety requirements for non-domestic lounge seating at severity level 1
EN 1022 stability	Evaluate front, rear, and side stability for the four-glide splayed-leg base
EN 1728 test methods	Applicable standards and test results require confirmation
EN 12521 domestic seating	Use as an alternate residential strength and durability reference if hotel-room or office-lounge standards permit

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4 lounge seating	Use static, impact, cyclic, leg-strength, and stability tests for public-space lounge seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 furniture mechanical test	Apply the chair back strength and durability test method to the tall back and shell anchorage
GB/T 10357.3 furniture mechanical test	Apply seat and front-edge static and fatigue load methods to verify long-term seat support
GB/T 10357.6 furniture mechanical test	Apply floor-glide and leg-strength methods relevant to four-leg household and contract chairs

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 furniture mechanical test：Apply the chair back strength and durability test method to the tall back and shell anchorage；
2. GB/T 10357.3 furniture mechanical test：Apply seat and front-edge static and fatigue load methods to verify long-term seat support；
3. GB/T 10357.6 furniture mechanical test：Apply floor-glide and leg-strength methods relevant to four-leg household and contract chairs；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LUX-HB-740-820-1080

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LUX-HB-740-820-1080

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LUX-HB-740-820-1080打开导出工具

页面快速操作

发布采购询价

产品描述

The Contemporary High-Back Upholstered Lounge Armchair combines a residential lounge character with a structured silhouette suited to professional interiors. Its tall back, integrated curved arm pads, and splayed four-leg base create a refined, enveloping form while retaining a compact single-seat layout. A separate padded upper back panel with a horizontal stitched seam adds visual definition above the continuous back and arm structure, where warm brown molded framing meets coordinated upholstery for a cohesive appearance. Polished chrome lower leg sections provide a crisp contrast against the warm brown upper supports and black floor glides. Construction centers on a rigid load-bearing back frame and a 12 mm bent plywood or steel-reinforced composite seat board. The seat uses flexible upholstery over a 90 mm high-resilience foam cushion, while the back features layered padding over its structural frame. Integrated arm pads flow into the side back panels, and the upper legs are offered in warm brown powder-coated or wood-finish rigid sections. Beneath these are 25 mm diameter polished chrome-finish steel tubes, each ending in a 30 mm black injection-molded polymer glide designed to reduce marking on hard floors when the chair is repositioned. Functionally, the chair is built for relaxed but supported seating. The fixed 430 mm seat height, 190 mm arm height above the seat, 540 mm clear width between armrests, and 650 mm high back address forearm, lumbar, shoulder, and head support during reception, reading, or conversation. A 240 mm lumbar support zone and separate head panel reinforce the high-back design. A return-swivel plate under the seat allows 360-degree movement with a return action, while the non-reclining structure and splayed four-point base deliver non-swivel stability across a 680 by 720 mm floor footprint. Bolted leg and shell connections permit replacement of glides and fasteners during maintenance. The chair is appropriate for executive office lounges, reception and visitor areas, hotel lobbies, club lounges, meeting pods, collaboration corners, private studies, bedrooms, and senior living lounge settings. It works well beside a low table as a single reading chair, in pairs for conversation, or in rows for waiting areas. Its light-duty commercial service target is 10 years, with a recommended user weight of 140 kg and seating capacity for one person. Procurement teams should note that the unbranded model LUX-HB-820-1080 ships as one set in two cartons, with a packaged gross weight of 23 kg and a reference assembly time of 40 minutes per set. The carton dimensions are 850 by 420 by 720 mm, with a total carton volume of 0.26 cubic meter per set, supporting planning for reception refreshes, lounge fit-outs, and multi-room residential specifications.

Contemporary High-Back Upholstered Lounge Armchair Specifications

供应商与现货