纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 680 × 1120 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	15 kg
Recommended user weight	160 kg
Static backrest load reference	227 kg
Cantilever frame cyclic durability	120,000 cycles
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound	40%
Upholstery abrasion acceptance	50,000 Martindale cycles
Recommended daily occupancy	8 hours per user
Color options available	1 visible color

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan leather or leather-look upholstery over padded cushioning
Back upholstery	Tan upholstered segmented high back with horizontal seam details
Seat cushion core	80 mm polyurethane foam with 45 kg/m3 density target
Back cushion core	60 mm polyurethane foam with 35 kg/m3 density target
Internal seat support	12 mm molded plywood or steel-reinforced board under the cushion
Internal back support	15 mm contoured board with black structural back rail
Arm pads	Tan upholstered padded pads matching seat material
Arm support brackets	Black angled steel supports with matte powder-coated finish
Cantilever base	Chrome-plated polished steel twin-rail sled frame
Frame coating	Decorative chrome plating over welded steel tube
Floor contact pads	4 non-marking polymer glides at rail ends
Seam construction	Stitched horizontal back seams with 8 mm seam pitch target

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Height adjustment	Fixed 450 mm seat height with no gas lift
Swivel function	Non-swiveling fixed seat mounted to a cantilever frame
Tilt and recline	0 deg fixed back angle with no tilt mechanism
Cantilever movement	Controlled vertical flex through the tubular steel sled base
Arm support	Fixed padded arms at 230 mm above the seat
Back support zones	Three visible padded zones for lumbar, upper-back, and shoulder support
Mobility	Glide-based movement on smooth floors using 4 polymer feet
Floor protection	Non-marking glides distribute pressure at each rail end
Stacking	Non-stacking configuration with fixed arm supports and rigid high back
Cleaning access	280 mm open floor clearance for vacuuming beneath the seat
Table compatibility	Designed for 760 mm high conference and boardroom tables
Occupant limit	Single-person seating with 160 kg recommended user weight

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive boardroom	Place around 760 mm conference tables for directors and formal meetings
Manager meeting room	Use on the visitor side of desks or around discussion tables
Reception lounge	Position opposite a low table for guests waiting in corporate reception areas
Conference center	Deploy in rows or around modular meeting tables where wheeled chairs are unnecessary
Private office visitor seating	Place one or two chairs in front of an executive desk
Hotel meeting suite	Specify for carpeted function rooms and business lounges with hard-floor glides
Government or institutional interview room	Use where a formal, non-reclining, high-back visitor chair is required
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 office seating	Use strength, durability, and safety requirements for non-domestic visitor and meeting chairs
EN 1022 seating stability	Verify forward, rearward, and lateral stability of the high-back sled chair
EN 12520 seating safety	Check structural safety, entrapment, and edge requirements for contract seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 furniture mechanical test	Apply seat and back static-load test requirements for straight metal-frame office chairs
GB/T 10357.3 furniture durability test	Apply seat and back fatigue requirements relevant to fixed cantilever seating
GB/T 3324 general technical specification	Use wooden furniture and finished-product dimensional and workmanship checks where board components apply
GB 28007 furniture safety	Use children's-furniture safety only if the chair is specified for educational or child-use spaces

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 furniture mechanical test：Apply seat and back static-load test requirements for straight metal-frame office chairs；
2. GB/T 10357.3 furniture durability test：Apply seat and back fatigue requirements relevant to fixed cantilever seating；
3. GB/T 3324 general technical specification：Use wooden furniture and finished-product dimensional and workmanship checks where board components apply；
4. GB 28007 furniture safety：Use children's-furniture safety only if the chair is specified for educational or child-use spaces；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · HB-CANT-LEA-620

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · HB-CANT-LEA-620

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · HB-CANT-LEA-620打开导出工具

页面快速操作

发布采购询价

产品描述

The High-Back Leather Conference Visitor Chair with Cantilever Base presents a formal seating solution for meeting, reception, and private office environments. Its tan upholstery creates a warm visual contrast with the black angled arm supports and polished chrome-plated steel sled frame. The segmented high back uses horizontal seam details and three visible padded zones, providing structured visual sections for lumbar, upper-back, and shoulder support. Padded arm caps match the seat upholstery, while the fixed seat and back give the chair a clean, orderly profile suited to professional interiors. Construction combines cushioned comfort with a rigid support structure. The seat features tan leather or leather-look upholstery over high-resilience foam, with an 80 mm polyurethane cushion core and a 12 mm molded plywood or steel-reinforced support board beneath. The back uses a 60 mm polyurethane cushion core over a 15 mm contoured board and black structural back rail. Armrests are supported by matte black powder-coated steel brackets, and the base is a chrome-plated twin-rail cantilever sled frame. Polymer feet help the chair glide on smooth floors while preserving its stable, non-swiveling layout. Functionally, the chair is designed for straightforward visitor use rather than task adjustment. It has a fixed 450 mm seat height, no gas lift, no swivel action, and a fixed back angle without tilt. The tubular steel cantilever base provides controlled vertical flex, and the fixed padded arms sit 230 mm above the seat. With a 540 mm clear width between armrests, generous finished cushioning, and a defined lumbar support zone, the chair balances a supportive feel with a tailored conference-room appearance. It is well suited to executive boardrooms, manager meeting rooms, reception lounges, conference centers, private offices, and hotel meeting suites. Typical placement includes visitor seating across from desks, positions around conference or discussion tables, rows in meeting spaces, and guest arrangements opposite low tables. The high-back form works particularly well where a more formal impression is desired. Procurement teams should note the model HB-CANT-LEA-620 is supplied unbranded and ships as one set across two cartons, with a reference assembly time of 40 minutes per set. The fixed configuration, cantilever mobility, glide feet, tan finish, and black-and-chrome frame should be reviewed against room décor, floor type, table height, and storage or handling requirements.

High-Back Leather Conference Visitor Chair with Cantilever Base Specifications

供应商与现货