纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 650 × 920 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight	160 kg
Net weight	16 kg
Static seat proof load reference	320 kg
Backrest horizontal load reference	100 kg
Armrest downward load reference	80 kg per arm
Daily seating capacity	1 user
Foam density	45 kg/m3 seat, 40 kg/m3 back
Foam rebound	40%
Expected service life	8 years
Warranty target	3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan leather-look upholstered surface over sewn perimeter border
Backrest upholstery	Tan padded rectangular back panel with framed edge piping
Seat cushion	Molded polyurethane foam pad with 80 mm crown thickness
Back cushion	Layered polyurethane padding at 70 mm thickness with resilient front face
Seat support panel	12 mm molded composite or bent plywood load board under the cushion
Armrest pads	Tan upholstered pads over rigid arm cores with 35 mm soft thickness
Arm supports	Polished chrome-plated steel brackets connecting pads to seat frame
Cantilever frame	25 mm chrome-plated steel tube with continuous twin-sled geometry
Floor glides	40 mm non-marking polymer end caps bonded into tube feet
Underside plate	Black powder-coated steel or rigid polymer anti-impact plate beneath the seat
Frame joint construction	Welded tubular junctions with concealed fasteners at arm and seat mounts
Seam construction	Single-needle perimeter seam with 8 stitches per 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Flexible sled-base give of 15 mm under seated load
Seat tilt	Fixed horizontal seat with no recline mechanism
Back support	Upright padded back at a 98-degree seated angle
Arm support	Fixed upholstered armrests at 680 mm above floor level
Mobility	Non-swiveling sled base with sliding polymer glides
Floor protection	Four polymer contact ends distribute the frame load
Stacking	Non-stacking single chair design
Nesting	No row-link or fold-up seat mechanism
Cleaning access	Smooth upholstered faces and open sled base allow wiping and floor access
Orientation	Front-facing chair with fixed back angle
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room	Place around 760 mm high boardroom tables for 450 mm seat-to-desk compatibility
Executive office	Use as a visitor chair facing a desk or alongside a lounge zone
Reception area	Pair two or four chairs with low tables in corporate reception spaces
Training room	Specify in rows for formal training where rolling chairs are unnecessary
Manager meeting space	Use for one-to-one discussions and short interviews
Hard-floor office	Recommended for timber, tile, marble, or sealed concrete floors with polymer glides
Conservative interior palette	Coordinate with walnut, black, white, grey, or charcoal desk systems
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 non-domestic seating	Use strength, durability, and safety requirements for contract seating
EN 1022 seating stability	Verify forward, rearward, and side stability on level test surfaces
EN 12520 seating safety	Check sharp edges, pinch points, and structural safety for seating

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1 General-Purpose Office Chairs	Use back, seat, arm, stability, and cyclic load clauses for commercial seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.3 seating strength	Apply back, seat, and arm static-load tests for metal office seating
GB/T 10357.6 furniture durability	Use cyclic seating and back-rest durability procedures for commercial chairs
GB 18584 indoor furniture limits	Require interior-furniture hazardous-substance limits for substrate and trim
GB/T 28202 hardware basis	Use furniture hardware terminology and inspection requirements for bolts and glides

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.3 seating strength：Apply back, seat, and arm static-load tests for metal office seating；
2. GB/T 10357.6 furniture durability：Use cyclic seating and back-rest durability procedures for commercial chairs；
3. GB 18584 indoor furniture limits：Require interior-furniture hazardous-substance limits for substrate and trim；
4. GB/T 28202 hardware basis：Use furniture hardware terminology and inspection requirements for bolts and glides；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OCC-CANT-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OCC-CANT-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OCC-CANT-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Upholstered Cantilever Conference Armchair is a polished visitor and meeting seat with a structured, executive appearance. Its tan leather-look upholstery gives the chair a warm, uniform finish, while the rectangular padded back, sewn seat border, framed edge piping, and matching armrest pads create a tailored visual profile. The continuous twin-sled cantilever frame in polished chrome-plated steel provides a light, open base that suits formal interiors without the visual complexity of a wheeled mechanism. The chair is built with padded polyurethane foam over a composite or bent plywood load board. Seat foam density is 45 kg/m3, while the back uses 40 kg/m3 layered padding with a resilient front face. The finished seat cushion is 90 mm thick with an 80 mm crown, the backrest padding is 70 mm thick, and the back includes a 240 mm lumbar support zone. Upholstered arm pads with rigid cores and 35 mm of soft thickness are supported by chrome-plated steel brackets. The 25 mm tubular steel cantilever frame terminates in bonded, non-marking polymer glides. Designed for stable, formal seating, the chair has a fixed horizontal seat with no recline function and a non-swiveling sled base. The upright padded back is set at a 98-degree seated angle, and the fixed armrests are positioned 680 mm above floor level. The cantilever offers 15 mm of flexible give under seated load, combining subtle movement with a controlled posture. Four polymer contact ends distribute frame load and help the chair slide neatly on hard floors. It is a non-stacking, single-user chair. This model is well suited to conference rooms, executive offices, corporate reception areas, training rooms, and manager meeting spaces. It can be placed around boardroom tables, used facing a desk as a visitor chair, arranged with low tables in reception, or specified in rows for formal training. The glides make it appropriate for timber, tile, marble, and sealed concrete floors. Procurement teams should note the unbranded OCC-CANT-TAN-01 model is supplied as one set in two cartons, with packaged gross weight of 23 kg and reference assembly time of 40 minutes per set. The clear width between armrests is 540 mm, and recommended user weight is 160 kg. Loading, freight, and assembly planning should account for the two-carton packaging and non-stacking design.

Tan Upholstered Cantilever Conference Armchair Specifications

供应商与现货