纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 680 × 980 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	16 kg
Recommended user weight	160 kg
Cantilever static seat load	320 kg
Backrest backward static load	110 kg
Arm downward static load	75 kg per arm
Seating capacity	1 person
Fabric abrasion acceptance target	50,000 Martindale cycles
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound	40%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Ivory leather-look upholstery over padded foam, with visible edge tailoring
Backrest upholstery	Ivory soft-faced padded panel with a tall rectangular silhouette
Outer back and side panels	Dark charcoal rigid panel forming the chair's exterior arm and back surround
Arm pads	Ivory upholstered pads with rounded front edges over a rigid arm support
Seat cushion	80 mm polyurethane foam on a rigid seat board
Back cushion	60 mm polyurethane padding bonded to the back support panel
Internal support board	12 mm molded plywood or composite seat and back board
Cantilever frame	25 mm diameter chrome-plated steel twin-tube sled base
Frame wall thickness	1.5 mm steel wall
Surface finish	Polished chrome plating on exposed tubular steel
Floor contact	Black non-marking glides inset into the runner ends
Fasteners	Satin or zinc-plated steel bolts connecting shell to cantilever cradle

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Fixed non-swivel base with controlled steel-spring flex and no recline mechanism
Height adjustment	Fixed 450 mm seat height with no gas cylinder
Back support	Tall fixed back provides upright shoulder and upper-back support for meeting use
Arm support	Two fixed padded arms support forearms and define the single-seat width
Floor mobility	Stationary sled base with glides, no casters
Stacking	Non-stacking upholstered executive chair
Entry and exit	Open front sled base permits approach from either side
Rocking restriction	Flex is limited by twin floor runners and rear bends; no lockout control is required
Maintenance	Upholstered surfaces should be wipe-cleaned; chrome base requires periodic dry polishing
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive meeting room	Fixed 450 mm seat height pairs with boardroom tables and supports formal guest seating
Visitor and reception area	Polished chrome base and ivory/dark upholstery provide a professional first-contact seating option
Manager office conversation area	One or two chairs can face a desk or low table without requiring mobility controls
Conference training room	Rows of non-caster chairs reduce unintended movement during presentations
Commercial office project	Suitable for procurement in executive floors, law firms, financial offices, and corporate meeting suites
Floor surface suitability	Glides are suited to hard tile, sealed wood, vinyl, and low-pile carpet mats
User profile	Designed for adult office users up to 160 kg in short-to-medium meeting durations
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139 applicability	Strength, durability, and safety requirements for non-domestic seating
EN 1022 applicability	Chair stability verification for forward, rearward, and lateral tipping
EN 14465 applicability	Upholstery fabric classification for abrasion, pilling, and construction

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4 applicability	Structural safety and durability test framework for lounge and executive seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 10357.2 applicability	Furniture mechanical surface durability test for the coated or plated metal base
GB/T 10357.3 applicability	Chair strength and durability test for seat, back, arms, and cantilever frame
GB/T 3324 applicability	General technical requirements for wooden furniture if panel substrates are wood-based

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 10357.2 applicability：Furniture mechanical surface durability test for the coated or plated metal base；
2. GB/T 10357.3 applicability：Chair strength and durability test for seat, back, arms, and cantilever frame；
3. GB/T 3324 applicability：General technical requirements for wooden furniture if panel substrates are wood-based；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-CANT-IV-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-CANT-IV-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-CANT-IV-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Ivory Upholstered Executive Visitor Chair presents a refined executive side-chair profile, pairing a tall rectangular ivory back and padded seat with dark charcoal outer back and side panels. This contrast gives the chair a structured, formal appearance, while rounded ivory arm pads and visible edge tailoring soften the visual line. Its polished chrome-plated twin-tube cantilever sled base creates a clean, open front and a streamlined commercial look suited to meeting and reception settings. Overall dimensions are 620 x 680 x 980 mm, with fixed seat height, fixed arms, and a single-seat layout defined by a 540 mm clear width between armrests. Construction combines padded comfort with a rigid support structure. The seat uses 80 mm polyurethane foam on a rigid seat board, finished with a 90 mm cushion and ivory leather-look upholstery. The back features 60 mm polyurethane padding bonded to its support panel, with a 70 mm finished padding thickness and a 240 mm lumbar support zone. Internal seat and back boards are 12 mm molded plywood or composite. The frame is a 25 mm diameter chrome-plated steel cantilever with 1.5 mm tube walls, fitted with glides rather than casters. As a fixed, non-swivel visitor chair, it offers controlled steel-spring flex without a recline mechanism or gas cylinder. The tall fixed back promotes upright shoulder and upper-back support during meetings, while the two padded arms support forearms. The stationary base reduces unintended movement, and the open sled design allows approach from either side. It is non-stacking and intended for one person. The chair is appropriate for executive meeting rooms, boardroom guest positions, reception areas, manager-office conversation seating, conference rooms, training spaces, and corporate office projects, including professional environments such as law firms, financial offices, and executive floors. Glides make it suitable for hard tile, sealed wood, vinyl, and low-pile carpet mats. Procurement teams should note the unbranded model EXEC-CANT-IV-01, recommended user weight of 160 kg, and fabric abrasion acceptance target of 50,000 Martindale cycles. Each set is supplied in two cartons, with packaged gross weight of 23 kg and reference assembly time of 40 minutes. The fixed height and non-caster design should be matched to intended table heights and floor plans, while the ivory upholstery should be considered in high-use reception settings where maintenance expectations are a priority.

Ivory Upholstered Executive Visitor Chair with Chrome Cantilever Base Specifications

供应商与现货