纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 680 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	160 kg
Product net weight	16 kg
Seating capacity	1 person
Recommended daily use duration	8 hours
Back static load acceptance target	136 kg vertical test load
Arm downward load acceptance target	68 kg per arm
Base stability overturning target	Pass 10-degree platform test
Durability target for seat and back cycles	100,000 cycles
Floor sliding endurance target	30,000 cycles
Recommended occupant weight capacity	160 kg static rated load

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan leather-look upholstered face with twin-panel seam
Backrest upholstery	Tan upholstered back divided by a vertical center seam
Seat foam	Molded polyurethane cushion, 100 mm thick, 45 kg/m3 density
Back foam	Molded polyurethane back pad, 90 mm lumbar thickness, 40 kg/m3 density
Upholstery abrasion layer	1.2 mm face material rated for 50,000 Martindal cycles
Internal seat board	12 mm molded plywood or composite load board
Back support shell	8 mm molded plywood or reinforced polypropylene inner shell
Arm pads	Tan upholstered padded pads over formed internal support
Arm side brackets	Polished stainless-steel-look formed metal supports
Sled base	Chrome-finish welded steel cantilever frame with 32 mm tube
Frame cross brace	Round steel cross brace connecting left and right cantilever sides
Floor contact tips	Replaceable polymer glide caps at four runner ends

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed arm support	Padded arms remain at 230 mm above seat and provide forearm support without height or pivot adjustment
Cantilever flex seating	Welded sled frame flexes slightly under 160 kg maximum occupant load and returns when unloaded
Stationary floor mobility	Chair repositions by sliding on four polymer glides; no swivel, gas lift, or caster rotation is provided
Floor protection	Four replaceable 30 mm glide caps distribute load and reduce scratching on hard floors
Back posture support	Twin-panel mid-back provides 560 mm vertical support with a centered lumbar seam and fixed 8-degree back angle
Seat entry clearance	Open front sled design provides 230 mm toe clearance under the front seat edge
Stacking limitation	Single non-stacking chair configuration; chairs should be nested at 200 mm pitch only if supplier verifies frame clearance
Noise control	Polymer glides and welded frame joints target less than 45 dB sliding noise on smooth hard floors
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive conference room	Use at 760 mm high boardroom tables for scheduled 2 hour meetings, where fixed arms and 450 mm seat height support formal seating.
Visitor seating outside offices	Place one or two chairs across from an executive desk for guests, using the polished frame and tan upholstery to coordinate with wood office furniture.
Meeting and interview room	Use as a stable non-swivel side chair for candidates or staff, limiting unintended movement during formal discussions.
Reception or VIP lounge	Configure in pairs around low meeting tables where a tailored mid-back appearance and easy pull-out access are required.
Executive office discussion area	Pair with a sofa or side table for short collaborative conversations, using the fixed cantilever frame for a compact footprint.
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.1

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for wooden furniture	applies to any plywood or wood-based inner board acceptance.
GB/T 10357.6-2013 Test of furniture mechanical properties for single seating	recommended for seat and back static and durability acceptance.
GB 18584-2001 Indoor decorative and refurbishing materials	limit of formaldehyde emission for wood-based furniture components.

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for wooden furniture：applies to any plywood or wood-based inner board acceptance.；
2. GB/T 10357.6-2013 Test of furniture mechanical properties for single seating：recommended for seat and back static and durability acceptance.；
3. GB 18584-2001 Indoor decorative and refurbishing materials：limit of formaldehyde emission for wood-based furniture components.；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-SLED-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-SLED-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-SLED-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Leather-Look Sled-Base Executive Conference Chair is a formal, single-person visitor and conference seat with a clean mid-back silhouette. Its tan upholstered face uses a twin-panel seat seam and a vertically centered back seam, giving the chair a tailored appearance suited to executive interiors. Polished metal arm supports, tan padded arm pads, and a chrome-finished steel sled frame create a structured visual profile, while the open-front base keeps the look light and orderly. The fixed design provides stationary seating without swivel, gas lift, or casters. Construction balances cushioning with a rigid support structure. The seat uses molded polyurethane foam over a molded plywood or composite load board, and the back combines molded foam with a molded plywood or reinforced polypropylene inner shell. The upholstery surface has a leather-look finish rated for 50,000 Martindale cycles. Arms are fixed at 230 mm above the seat and supported by polished stainless-steel-look formed metal brackets. The welded steel sled frame is finished in chrome and fitted with four replaceable polymer glide caps that help reduce scratching on hard floors. The chair is designed for supportive formal seating. Its mid-back provides a fixed 8-degree angle, a centered lumbar seam, and a defined lumbar support zone. The cantilever sled frame flexes slightly under a maximum occupant load of 160 kg and returns when unloaded. The chair is recommended for up to 8 hours of daily use and offers a 540 mm clear width between armrests. Four 30 mm glides allow repositioning by sliding, while the open front provides 230 mm toe clearance for ease of entry. Overall dimensions are 650 x 680 x 1010 mm, product net weight is 16 kg, and seating capacity is one person. This model is appropriate for executive conference rooms, visitor positions outside offices, interview rooms, reception areas, VIP lounges, and discussion zones within executive offices. It coordinates with wood office furniture and works well across from executive desks, around low lounge tables, or beside sofas and side tables. For boardroom use, it is intended with 760 mm high tables, and a 2.4 m executive desk is a recommended matching scale. In meeting spaces, the non-swivel base limits unintended movement and supports a composed seating arrangement. Buyers should note that this is an unbranded model, EXEC-SLED-TAN-01, supplied as one set in two cartons, with reference assembly time of 40 minutes per set. Packaged gross weight is 23 kg, carton volume is 0.26 cubic meters, and indicative loading is 135 sets in a 20GP container at 85 percent space utilization. The chair is a non-stacking configuration; nesting at 200 mm pitch should only be used if frame clearance is verified. Procurement planning should also confirm finish expectations, glide suitability for the intended floor, and assembly requirements before placement.

Tan Leather-Look Sled-Base Executive Conference Chair Specifications

供应商与现货