纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	650 × 760 × 1040 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	17.5 kg
Recommended user weight	160 kg
Recommended occupant height range	1900 mm
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound rating	40%
Seat surface static load target	70 kg distributed per seat
Cantilever cyclic durability target	100,000 cycles
Floor runner static load target	160 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Outer upholstery	Black leather-look surface with visible natural creases; material grade requires supplier BOM confirmation
Seat cushion	90 mm polyurethane foam pad wrapped in black upholstery for a soft front edge
Back cushion	70 mm padded polyurethane assembly with a separate upper head-cushion zone
Head pillow	Integrated horizontally sewn padded section using the same black upholstery
Arm pads	Rounded black padded caps attached to the vertical polished side supports
Arm supports	Bright polished chrome-plated steel panels connecting the arm pads to the seat frame
Cantilever frame	Continuous polished chrome-plated steel tube forming two sled legs and a rear floor bar
Back internal frame	1.5 mm steel back cradle with edge stiffeners, inferred for high-back commercial construction
Frame surface finish	Mirror-polished chrome plating over steel tubing, based on visible reflective finish
Floor contact runners	Chrome tube ends with concealed anti-slip glides to protect hard floors
Stitching	Single-line black upholstery seam dividing the head cushion from the lower back panel
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cantilever movement	Fixed sled frame allows controlled vertical flex without swivel, tilt, or height adjustment
Back support	Tall segmented back provides shoulder and upper-back support with a padded head zone
Arm support	Fixed padded armrests provide forearm support and a side entry height of 180 mm above the seat
Floor protection	Two continuous floor runners distribute load and accept replacement nylon or felt glides
Seating entry	Open front cantilever design permits side or front entry without a front crossbar
Stacking	Non-stacking single-unit construction suited to permanent meeting-room layouts
Recline adjustment	No recline mechanism; back angle is fixed at a 100-degree relaxed meeting posture
Swivel function	No swivel bearing or five-star base, keeping the visitor position stationary
Assembly form	Back, seat, and arm assemblies mount to the polished cantilever frame with concealed fasteners
Maintenance	Smooth upholstery and exposed chrome frame support wiping, vacuuming, and routine chrome cleaning
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Carton dimensions	720 x 660 x 1080 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office visitor placement	Position one or two chairs in front of an executive desk for fixed-height guest seating
Meeting room configuration	Use around conference tables where a quiet chrome sled base and high-back image are required
Reception and lounge area	Suitable for premium reception zones because the black upholstery coordinates with wood or metal interiors
Boardroom visitor seating	Place on the visitor side of boardroom tables without requiring casters or task-chair controls
Management interview room	Provides formal support for adults during conversations lasting 60 to 120 minutes
Hotel business center	Use in executive lounges or meeting suites needing durable wipe-clean seating
Recommended grouping	Specify in pairs or sets of 4 to 8 with matching leather grade and chrome finish across a project
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013+AC:2015 non-domestic seating strength and durability	Primary standard reference for contract visitor and meeting-chair durability
EN 1022:2018 seating stability	Recommended acceptance basis for front, rear, and side tipping stability
EN 14465:2003 upholstery fabrics assessment	Use if the final material is coated textile rather than genuine leather
EN 1335-2:2009 office task chairs safety requirements	Selected structural safety clauses may be referenced, though this is not a swivel task chair

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 wooden furniture general technical requirement	Use for dimensional, workmanship, and finish acceptance if wood-composite seat boards are present
GB/T 3325-2017 metal furniture general technical requirement	Apply to steel-tube strength, welding, coating, and plated-frame inspection
GB 18584-2001 indoor wooden furniture limited harmful substances	Use as acceptance reference for formaldehyde emission from wood-based internal panels
GB/T 10357 furniture mechanical test methods	Reference test methods for seat, back, arm, and leg static and fatigue loading

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 wooden furniture general technical requirement：Use for dimensional, workmanship, and finish acceptance if wood-composite seat boards are present；
2. GB/T 3325-2017 metal furniture general technical requirement：Apply to steel-tube strength, welding, coating, and plated-frame inspection；
3. GB 18584-2001 indoor wooden furniture limited harmful substances：Use as acceptance reference for formaldehyde emission from wood-based internal panels；
4. GB/T 10357 furniture mechanical test methods：Reference test methods for seat, back, arm, and leg static and fatigue loading；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EC-CB-650-LEATHER

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EC-CB-650-LEATHER

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EC-CB-650-LEATHER打开导出工具

页面快速操作

发布采购询价

产品描述

The Black Leather Executive Visitor Chair combines a high-back executive silhouette with the clean lines of a polished cantilever frame. Its black leather-look upholstery presents visible natural creases for a refined office appearance, coordinated with bright chrome-plated steel surfaces. A horizontally sewn, integrated padded head section extends the segmented backrest, while rounded black arm caps add visual softness against the polished vertical side supports. The continuous sled frame creates two floor runners joined by a rear floor bar, giving the chair an open, formal profile without casters or adjustment controls. Construction centers on cushioned polyurethane support: the seat uses a 90 mm foam pad with a soft wrapped front edge, and the backrest uses 70 mm of padding over a steel cradle with edge stiffeners. Seat foam density is 45 kg/m3, back foam density is 35 kg/m3, and the foam rebound rating is 40 percent. The 240 mm lumbar support zone, tall shoulder and upper-back structure, and padded head area create a fixed upright posture. Between the armrests, the clear width is 540 mm. The frame is polished chrome-plated steel tubing, and padded arm supports connect the arm caps directly to the seat frame. Functionally, the chair is built for stable visitor seating rather than active task use. The fixed cantilever base allows controlled vertical flex but does not swivel, tilt, recline, or adjust in height. The back angle is fixed at 100 degrees for a relaxed meeting posture. Fixed padded armrests provide forearm support, with a side entry height of 180 mm above the seat. The open front and absence of a front crossbar permit front or side entry. Continuous runners distribute load and can accept replacement nylon or felt glides. The chair is non-stacking and intended as a single permanent seat. It is well suited to executive offices, conference rooms, premium reception areas, boardrooms, interview rooms, and hotel business centers. Place one or two in front of an executive desk, use them around meeting tables, or coordinate the black finish with wood or metal interiors. The recommended user weight is 160 kg, and the maximum recommended occupant height is 1900 mm, making the model appropriate for formal adult seating during conversations and meetings. Procurement planning should note the EC-CB-650-LEATHER model, unbranded status, overall dimensions of 650 x 760 x 1040 mm, and 17.5 kg net weight. Packaging reference data shows two cartons per set, 23 kg packaged gross weight, and 0.26 cubic meter total carton volume, with an assembly time of 40 minutes per set. Buyers should confirm the exact upholstery material grade through the supplier bill of materials before final specification, as the listed surface is leather-look rather than confirmed natural leather.

Black Leather Executive Visitor Chair with Polished Cantilever Base Specifications

供应商与现货