纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	620 × 660 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	16 kg
Recommended user weight capacity	160 kg
Recommended user height range	190 cm
Seating capacity	1 person
Upholstery abrasion acceptance target	50,000 Martindale cycles
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam resilience	35 percent
Frame static verification load	640 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	Tan leather-look upholstered surface over padded cushion
Back upholstery	Tan padded front face with stitched vertical contour panels
Rear back shell	Black rigid molded back panel with exposed side border
Seat cushion core	90 mm polyurethane foam, 45 kg/m3 procurement specification
Back cushion core	70 mm shaped polyurethane lumbar foam, 35 kg/m3 procurement specification
Arm pads	Tan upholstered padded pads mounted on chrome supports
Arm supports	Polished chrome-plated bent steel loop supports, 25 mm tube diameter
Sled base	Polished chrome-plated cantilever steel tube with twin floor runners
Floor glides	4 black non-marking polymer glides at runner ends
Internal seat support	12 mm plywood or steel-reinforced molded seat board
Internal back support	8 mm molded board or steel-reinforced back board
Seam construction	Bonded upholstery seams with 8 stitches per 50 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed ergonomic posture	450 mm fixed seat height with continuous lumbar support for meeting use
Cantilever comfort	Twin chrome runners provide controlled flex under seated weight
Swivel function	No swivel; seat and back are fixed to the stationary base
Recline function	No active recline; back angle is fixed at 100 degrees
Arm support	Fixed padded armrests at 230 mm above the seat support forearms during meetings
Back support zones	Upper shoulder padding and separate lumbar pad provide two-zone back contact
Floor protection	4 polymer end glides allow sliding while reducing hard-floor marking
Stacking limitation	Non-stacking fixed guest chair with full upholstered back and arm frame
Cleaning and maintenance	Smooth upholstered faces and chrome frame support wipe-down maintenance
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Boardroom meeting room	Use around 760 mm high conference tables where a uniform executive appearance is required
Executive office visitor seating	Place in front of an executive desk for guests or short consultations
Management meeting area	Specify in matched sets for director rooms or negotiation spaces
Reception lounge	Position behind low tables or along visitor routes in upscale office receptions
Training and seminar rooms	Suitable for assigned seating in premium training rooms without mobile-chair requirements
Procurement configuration	Order with armchairs in sets of 2, 4, 6, or 8 around rectangular or oval conference tables
Flooring suitability	Use on hard floors, tile, or low-pile carpet with polymer glides
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 16139:2013 applicability	Strength, durability, and safety requirements for non-domestic seating
EN 1022:2018 applicability	Determination of stability for seating without adjustment mechanisms
EN 14465:2003 applicability	Upholstery fabric abrasion, appearance, and performance assessment
EN 12520:2015 applicability	Mechanical safety and structural test references for household seating, useful as secondary benchmark

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4-2022 applicability	Structural safety and performance test reference for lounge and public-office seating

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 applicability	Use for general wooden furniture dimensional and construction inspection if wood seat boards are supplied
GB/T 3325-2017 applicability	Use for metal furniture strength, coating, and dimensional inspection of the steel sled base
GB 18584-2001 applicability	Indoor-use decorative furniture element limit for formaldehyde and soluble heavy metals
GB/T 10357.3-2013 applicability	Chair and stool strength and durability test method for seat and back loading

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 applicability：Use for general wooden furniture dimensional and construction inspection if wood seat boards are supplied；
2. GB/T 3325-2017 applicability：Use for metal furniture strength, coating, and dimensional inspection of the steel sled base；
3. GB 18584-2001 applicability：Indoor-use decorative furniture element limit for formaldehyde and soluble heavy metals；
4. GB/T 10357.3-2013 applicability：Chair and stool strength and durability test method for seat and back loading；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-SLED-TAN-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-SLED-TAN-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-SLED-TAN-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Tan Leather-Look Executive Conference Chair with Chrome Sled Base presents a refined meeting-room seating solution through a coordinated tan and black visual scheme. Its tan upholstered seat, padded arm pads, and stitched vertical contour panels on the backrest create a structured executive appearance, while the black rigid molded rear shell provides a crisp border along the sides. The polished chrome cantilever sled base and bent-steel loop arm supports give the chair a light, open silhouette and a consistent look for grouped conference layouts. Model EXEC-SLED-TAN-01 is an unbranded, fixed-back executive visitor chair intended for one occupant. Construction combines padded comfort with a stationary metal frame. The seat uses a 90 mm polyurethane foam cushion with a 45 kg/m3 procurement specification beneath a tan leather-look surface. The backrest uses 70 mm shaped polyurethane lumbar foam at 35 kg/m3, with a tan padded front face, a separate lumbar contact area, and upper shoulder padding for two-zone back support. The frame is formed from polished chrome-plated steel, including twin floor runners and 25 mm diameter arm support loops. Four black non-marking polymer glides are fitted at the runner ends. The chair is designed for fixed ergonomic posture rather than active movement. Seat height is fixed at 450 mm, the back angle is fixed at 100 degrees, and there is no swivel or recline function. Fixed padded armrests sit 230 mm above the seat to support forearms during meetings, while the 240 mm lumbar support zone and 540 mm clear width between armrests contribute to a formal seated posture. The cantilever runners provide controlled flex under seated weight, and the glides allow repositioning while reducing marking on hard floors. The recommended user weight capacity is 160 kg, recommended user height is 190 cm, and the upholstery abrasion acceptance target is 50,000 Martindale cycles. This model suits boardrooms and management meeting areas where a uniform executive appearance is required, particularly around 760 mm high conference tables. It also works as visitor seating in front of executive desks, in director rooms and negotiation spaces, in upscale reception lounges, and in premium training or seminar rooms where mobile chairs are not needed. For procurement, matched sets of 2, 4, 6, or 8 can be arranged around rectangular or oval tables. Each set is supplied in two cartons, with a reference assembly time of 40 minutes, a packaged gross weight of 23 kg, and a carton volume of 0.26 cubic meter. The indicative loading is 135 sets in a 20GP container at 85 percent space utilization, supporting consistent specification across larger meeting-room projects.

Tan Leather-Look Executive Conference Chair with Chrome Sled Base Specifications

供应商与现货