| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1100 x 760 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Leg assembly width per unit | 350 mm | |
| Vertical slat diameter | 20 mm | |
| Thick central support slat width per leg set | 80 mm | |
| Under-table knee clearance height | 690 mm | |
| Table edge overhang per long side | 50 mm | |
| Table edge overhang per short end | 100 mm | |
| Floor clearance under leg base crossbar | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 300 kg | |
|---|---|---|
| Seating capacity | 8 persons | |
| Net product weight | 150 kg | |
| Surface stain resistance rating | Grade 1 | |
| Surface abrasion resistance | 6000 revolutions | |
| Metal frame static load rating per leg assembly | 200 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-gloss polished natural marble with subtle grey veining | |
|---|---|---|
| Tabletop edge finish | Straight polished eased edge | |
| Leg slat material | 1.5mm thick carbon steel with brushed brass finish | |
| Central support slats | 2mm thick carbon steel with brushed brass finish | |
| Leg connection hardware | Grade 8.8 zinc-plated steel bolts and cross-braces | |
| Tabletop underside reinforcement | 20mm thick plywood backing panel | |
| Surface sealant | Penetrating stone sealer with matte protective topcoat | |
| Floor contact pads | 5mm thick non-slip rubber pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly with included hex key and installation manual | |
|---|---|---|
| Table type | Fixed non-extendable solid top design | |
| Leg orientation | Vertical slat alignment parallel to table short ends | |
| Under-table clearance | Unobstructed full-length knee space between two leg assemblies | |
| Surface maintenance | Non-porous sealed surface allows wipe-clean with soft damp cloth | |
| Leg stability | Dual wide slat assemblies eliminate table wobble on level hard floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 8-person family meals and formal dining in open-plan luxury homes | |
|---|---|---|
| Open-plan living space | Minimalist open leg design maintains visual lightness in combined living-dining areas | |
| High-end restaurant private room | Durable stone top and elegant finish fit upscale dining venue private dining areas | |
| Showroom display | Signature minimalist design works as a focal piece for furniture showroom lifestyle displays | |
| Luxury apartment common area | Appropriate for shared dining spaces in high-end serviced apartments and residential towers | |
| Recommended pairing | Matches with minimalist upholstered or molded dining chairs with seat height 450mm |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applies to strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 15372:2008 | Applies to furniture surface resistance to cold liquids, recommended for marble sealant verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applies to general technical requirements for wooden furniture, suitable for stone-topped dining table structural inspection | |
|---|---|---|
| GB/T 4893.4-2013 | Applies to surface wear resistance testing for furniture finishes, recommended for tabletop finish verification | |
| GB 18584-2001 | Applies to limit of harmful substances in wood furniture, recommended for backing panel and adhesive inspection |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applies to general technical requirements for wooden furniture, suitable for stone-topped dining table structural inspection; 2. GB/T 4893.4-2013: Applies to surface wear resistance testing for furniture finishes, recommended for tabletop finish verification; 3. GB 18584-2001: Applies to limit of harmful substances in wood furniture, recommended for backing panel and adhesive inspection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
