Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1830 × 1000 × 760 mm
Tabletop thickness	38 mm
Tabletop edge profile	2 mm slight beveled polished edge
Per pedestal base dimensions	380 x 380 x 722 mm
Under-table knee clearance height	722 mm
Pedestal setback from table ends	230 mm
Pedestal setback from table sides	310 mm
Brass inlay width	8 mm
End seating clearance width	580 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Static distributed tabletop load capacity	250 kg
Net product weight	180 kg
Stone surface impact resistance	0.7 J
Brass inlay bond durability	1000 wipe cycles
Structural warranty period	5 years
Surface stain resistance rating	Grade 5
Available standard length variants	2200 mm
Seating capacity per long side	3 seats
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop material	Polished dark green veined natural marble with sealed glossy finish
Pedestal base material	Polished dark grey engineered or natural marble block with faceted geometry
Decorative inlay material	Polished solid brass trim along vertical pedestal corners
Tabletop backing material	10 mm fiberglass reinforced mesh anti-crack backing
Assembly hardware	M10 stainless steel mounting bolts with anti-slip rubber gaskets
Base bottom protectors	5 mm thick non-slip rubber floor glides
Surface sealant	Penetrating stone sealer with high-gloss PU top coat
Connector plate material	5 mm thick powder-coated steel internal mounting plate
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Table structure	Fixed non-extendable rigid frame with no leaf extension mechanism
Seating configuration	Accommodates 6 diners (3 per long side) with open leg access
Assembly requirement	Two-person knockdown assembly attaching tabletop to pre-assembled pedestals
Floor protection	Integrated rubber glides prevent scratching hard flooring and allow micro-adjustment for level
Surface maintenance	Wipe-clean sealed surface resistant to water and common food spills
Weight distribution	Dual pedestal design evenly distributes load to prevent tabletop sag or tipping
Leveling adjustment	10 mm adjustable height range via base glides to accommodate uneven floors
Edge safety	Smooth beveled edges eliminate sharp corners to reduce impact injury risk
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Serves 6 diners for formal family meals and casual entertaining, luxury finish complements modern interiors
Open-plan kitchen dining area	Open pedestal design maintains visual lightness while providing stable dining surface for daily use
High-end residential show home	Polished marble and brass details create a premium focal point for luxury property staging
Private lounge dining nook	Compact 1830mm length fits smaller upscale dining areas without compromising seating capacity
Boutique hotel guest dining area	Durable sealed stone surface withstands frequent commercial use in small hospitality suites
Luxury apartment common area	Rigid structure and premium finish suit upscale multi-family residential amenity spaces

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, applicable for structural performance requirements
EN 13722:2004	Furniture - Test methods for the assessment of surface resistance to cold liquids, applicable for stone surface stain testing
EN 71-3:2019	Safety of toys - Migration of certain elements, applicable for lead/cadmium limits in surface finishes and metal trim

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerances
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture, applicable for sealant VOC limits
GB/T 4897.3-2015	Particleboard for furniture use, applicable if engineered stone backing uses composite board components

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerances;
2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture, applicable for sealant VOC limits;
3. GB/T 4897.3-2015: Particleboard for furniture use, applicable if engineered stone backing uses composite board components;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DT-MBL-DBLPED-1800

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DT-MBL-DBLPED-1800

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DT-MBL-DBLPED-1800Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Luxury Rectangular Polished Dark Green Veined Marble Double Pedestal Dining Table, model DT-MBL-DBLPED-1800 from an unbranded line, presents a refined contemporary luxury silhouette defined by clean lines and high-gloss finished surfaces. The rectangular tabletop features rich dark green natural marble threaded with natural veining, framed by a subtle 2 mm polished beveled edge, elevated by two faceted polished dark grey stone pedestals positioned to leave open, unobstructed access around the seating perimeter. Each pedestal is accented with thin polished solid brass vertical inlays along its corners, creating a subtle metallic contrast that elevates the piece’s premium aesthetic. The dual-pedestal layout is calibrated to balance visual lightness with structural stability, avoiding the leg obstruction common to four-legged table designs. Crafted for long-term durability, the 38 mm thick marble tabletop is reinforced with a 10 mm fiberglass mesh anti-crack backing, finished with a penetrating stone sealer and high-gloss PU top coat that delivers a Grade 5 stain resistance rating. Pedestals are constructed from polished dark grey engineered or natural marble blocks, mounted to the tabletop via 5 mm powder-coated steel internal connector plates and M10 stainless steel bolts with anti-slip rubber gaskets. The base of each pedestal is fitted with 5 mm non-slip rubber glides, which protect hard flooring from scratches and offer 10 mm of height adjustment to level the table on uneven surfaces. The brass inlays are tested to withstand 1000 wipe cycles without bond failure, the stone surface resists 0.7 J impacts, and the rigid fixed non-extendable frame supports a static distributed load of 250 kg without sag or tipping, backed by a 5-year structural warranty. Functional design supports seamless daily use: the fixed table accommodates 6 diners, with three seats per long side, and offers 722 mm of under-table knee clearance for comfortable seating. The sealed glossy surface wipes clean easily, resisting water and common food spills to reduce routine maintenance effort. Two-person knockdown assembly is required to attach the tabletop to the pre-assembled pedestals, with an assembly time of 40 minutes; the set ships in two cartons. The table is well suited for residential dining rooms, open-plan kitchen dining areas, private lounge dining nooks, high-end show home staging, boutique hotel guest dining areas, and luxury apartment common spaces. For procurement, note that the 1800-series model has an overall dimension of 1830 x 1000 x 760 mm, with a 2200 mm length variant available for larger spaces; the 180 kg net weight requires appropriate load-bearing floor placement, and the glossy finish should be paired with non-abrasive cleaning supplies to preserve its polished appearance over time.

Luxury Rectangular Polished Dark Green Veined Marble Double Pedestal Dining Table Specifications

Suppliers and stock