Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 900 × 762 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Leg cross-section diameter | 30 mm | |
| Under-table knee clearance height | 710 mm | |
| Under-table floor clearance height | 710 mm | |
| Long-side seating space per person | 600 mm | |
| End-side seating width per position | 450 mm | |
| Leg splay angle from vertical | 15 degrees | |
| Corner leg cluster spacing | 80 mm | |
| Edge profile radius | 2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 68 kg | |
|---|---|---|
| Distributed tabletop static load | 150 kg | |
| Recommended maximum seating capacity | 6 people | |
| Tabletop surface heat resistance | 1200 °C | |
| Surface abrasion resistance | 6000 cycles | |
| Frame static load per leg | 75 kg | |
| Product warranty period | 5 years | |
| Available finish color count | 1 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 12mm matte sintered stone | |
|---|---|---|
| Leg material | Powder-coated carbon steel tubing | |
| Tabletop-to-leg connection plate | 5mm thick galvanized steel | |
| Connector hardware | M8 hex bolts and lock nuts | |
| Foot pads | 8mm thick non-slip TPE adjustable feet | |
| Surface finish | Matte nano anti-fingerprint coating | |
| Internal support frame | 20x40mm rectangular steel crossbars | |
| Frame coating thickness | 60 μm powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Assembly configuration | Knock-down flat-pack assembly | |
|---|---|---|
| Adjustable foot function | 15 mm vertical adjustment range | |
| Surface maintenance | Stain and water resistant non-porous top | |
| Table structure | Fixed non-extendable rectangular top | |
| Floor protection | Soft TPE foot pads prevent floor scratches | |
| Stability design | Clustered splayed legs at each corner | |
| Edge safety | Minimally rounded table edges | |
| Cable management | No integrated cable management | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room | Suitable for modern minimalist open-plan dining areas for 6-person household meals | |
|---|---|---|
| Apartment open living space | Low-profile matte black finish complements contemporary neutral interior palettes | |
| Small restaurant/cafe seating | Durable easy-clean surface suitable for light commercial casual dining use | |
| Matching chair configuration | Pairs with upholstered dining chairs with black metal legs as shown in scene | |
| Space size requirement | Requires minimum 2700 x 2400 mm dining area for full chair clearance on all sides | |
| Style compatibility | Matches industrial, minimalist, modern luxury and wabi-sabi interior design schemes |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Furniture safety | EN 12521:2015 | |
|---|---|---|
| Surface emission | EN 13986:2004+A1:2015 | |
| Metal finish durability | EN 12720:2009+A1:2013 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Tabletop surface material | GB/T 41091 | |
|---|---|---|
| Furniture stability | GB/T 10357.7 | |
| Furniture structural strength | GB/T 10357.1 |
Standardized tender description text
This product must meet the following technical requirements: 1. Tabletop surface material: GB/T 41091; 2. Furniture stability: GB/T 10357.7; 3. Furniture structural strength: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool