| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 15 mm | |
| Under-table knee clearance height | 680 mm | |
| Pedestal support cross-section | 100 x 100 mm | |
| Central decorative panel size | 800 x 600 mm | |
| Per person seating width | 800 mm | |
| Table edge overhang | 50 mm | |
| Clear floor space requirement | 3400 x 1900 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop uniform distributed load | 150 kg | |
|---|---|---|
| Sintered stone heat resistance | 1200 °C | |
| Sintered stone water absorption rate | 0.5% | |
| Total table net weight | 120 kg | |
| Recommended user capacity | 6 people | |
| Frame surface scratch resistance | 3000 cycles | |
| Structural warranty | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Dark patterned sintered stone slab | |
|---|---|---|
| Support frame | 1.2mm thick carbon steel with gunmetal powder coating | |
| Central base panel | E1-grade MDF with dark wood grain veneer | |
| Frame weld points | Fully welded ground steel joints | |
| Underside reinforcement | 2mm thick steel cross bracing | |
| Decorative inlay | Brushed stainless steel circular trim | |
| Foot pads | Non-slip adjustable rubber pads | |
| Hardware fasteners | 8.8-grade galvanized steel bolts | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Surface use function | Multi-purpose flat surface for both formal dining and tea ceremony service | |
|---|---|---|
| Structural design | Fixed non-extendable rigid frame construction | |
| Clearance access | Unobstructed knee space for seating on all four sides | |
| Assembly function | Flat-pack knockdown assembly with pre-drilled holes | |
| Surface maintenance | Stain-resistant non-porous tabletop wipes clean with damp cloth | |
| Leveling adjustment | Adjustable rubber foot pads compensate for uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Formal dining and tea service for 6-person households | |
|---|---|---|
| Teahouse private room | Dual-use for tea tasting sessions and light dining service | |
| Office reception area | Host small client meetings with tea service for executive spaces | |
| Restaurant dining space | High-end Chinese restaurant dining or private booth seating | |
| Recommended configuration | Paired with 6 matching dark metal frame fabric-upholstered dining armchairs |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture – test methods for surface resistance to cold liquids for dining surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood base panel components | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture, applicable to composite panel structural elements | |
| GB 18584-2001 | Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture | |
| GB/T 19001-2016 | Quality management system requirement for production process control |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood base panel components; 2. GB/T 4897.3-2015: Particleboard for furniture, applicable to composite panel structural elements; 3. GB 18584-2001: Indoor decorating and refurbishing materials – limit of harmful substances for wooden furniture; 4. GB/T 19001-2016: Quality management system requirement for production process control; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
