| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2000 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Integrated central tea tray zone dimensions | 1200 x 300 mm | |
| Perimeter knee clearance height | 680 mm | |
| Long-side seating clearance | 600 mm | |
| Short-side seating clearance | 400 mm | |
| Tabletop overhang past pedestal | 100 mm | |
| Chair seat height (matching set) | 450 mm | |
| Chair overall dimensions (per unit) | 620 x 580 x 850 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table total net weight | 180 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 300 kg | |
| Recommended maximum seating capacity | 6 users | |
| Surface temperature resistance | 1200 °C | |
| Surface scratch resistance (Mohs hardness) | 6 | |
| Pedestal static vertical load per support | 200 kg | |
| Surface stain penetration resistance | 0.03% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slab | 30mm polished black sintered stone with nano anti-stain coating | |
|---|---|---|
| Support pedestals | Polished natural black-and-white veined marble block, solid construction | |
| Internal support frame | 50x50mm carbon steel square tube with matte black powder coating | |
| Recessed tea tray insert | Matte black sintered stone panel, flush-fit to tabletop | |
| Chair frames | 20x20mm matte black powder-coated carbon steel square tubing | |
| Chair upholstery | 30mm high-density polyurethane foam with 1mm thick matte grey woven fabric | |
| Chair lumbar pillows | 20mm soft rebound polyester fiber fill, matching grey woven fabric | |
| Surface finish coating | Nano crystal clear coat, 0.1mm thick, 5 application passes | |
| Foot pads | 8mm thick non-slip rubber pads at pedestal base contact points | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Integrated tea service zone | Recessed central tray area sized for teapot, 4 teacups and tea accessories | |
|---|---|---|
| Dual pedestal support design | End-mounted block supports providing unobstructed perimeter leg room for 6 seats | |
| Seating configuration | Supports 4 seats along long edges and 2 seats at short ends for 6-person tea service | |
| Surface maintenance function | Non-porous polished top allows wet wiping and stain removal without sealant reapplication | |
| Assembly requirement | Knock-down construction requiring attachment of pedestals to tabletop with included hardware | |
| Floor protection function | Rubber foot pads prevent marble base scratches to hard flooring and reduce movement noise | |
| Optional upgrade fitment | Pre-cut mounting points under tea zone compatible with embedded electric water boiler and drain bucket | |
| Pedestal block dimensions | 400 x 800 x 720 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Commercial tea room application | Suitable for high-end tea house private rooms, supporting 6-person formal tea service | |
|---|---|---|
| Home dining space application | Suitable for open-plan luxury dining rooms, used for daily dining and home tea gatherings | |
| Office reception space application | Suitable for executive office reception areas, used for hosting guests and casual meetings | |
| Villa living space application | Suitable for villa open living/entertainment zones, paired with modern minimalist soft furnishings | |
| Recommended clearance around table | 900 mm minimum clearance from table edge to walls/obstacles to allow chair movement and access |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for load testing | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface finishes, applicable to stone top abrasion resistance check | |
| EN 71-3:2019 | Migration of certain elements, applicable to coating material safety evaluation |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural frame evaluation | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in furniture, applicable to formaldehyde emission check for non-stone components | |
| GB/T 15102-2017 | Specification for artificial stone decorative slabs, applicable to sintered stone tabletop quality check | |
| GB/T 19766-2016 | Specification for natural marble building slabs, applicable to pedestal material quality check |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural frame evaluation; 2. GB 18584-2001: Limit of harmful substances in furniture, applicable to formaldehyde emission check for non-stone components; 3. GB/T 15102-2017: Specification for artificial stone decorative slabs, applicable to sintered stone tabletop quality check; 4. GB/T 19766-2016: Specification for natural marble building slabs, applicable to pedestal material quality check; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
