| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1600 x 800 x 650 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Cylindrical cabinet base diameter | 400 mm | |
| Cylindrical cabinet base height | 620 mm | |
| Gold open trestle frame width | 780 mm | |
| Gold trestle frame leg diameter | 30 mm | |
| Matched round ottoman dimensions | 380 x 380 x 380 mm | |
| Under-table floor clearance | 30 mm | |
| Gold edge trim thickness | 8 mm | |
| Integrated tea tray placement area | 800 x 400 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Table unit net weight | 90 kg | |
| Seating capacity for tea service | 4 people | |
| Sintered stone surface heat resistance | 1200 °C | |
| Gold metal frame static load rating | 200 kg | |
| Structural warranty | 5 years | |
| Surface scratch resistance rating | Grade 3 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | 12mm white sintered stone with polished finish | |
|---|---|---|
| Table edge trim | Polished PVD gold stainless steel | |
| Left cylindrical support bases | E0-grade MDF with matte white baked paint finish | |
| Right open support frame | 1.2mm thick polished gold stainless steel tubing | |
| Base bottom protectors | 3mm thick non-slip rubber floor pads | |
| Ottoman upholstery | 280gsm matte velvet fabric with vertical pleating | |
| Ottoman fill material | 35kg/m³ high-resilience polyurethane foam | |
| Ottoman internal frame | 15mm thick plywood support structure | |
| Internal storage compartment lining | 1mm thick non-woven fabric lining | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Hidden storage in cylindrical bases | Two soft-close storage compartments for tea utensils | |
|---|---|---|
| Integrated tea service layout | Flat pre-sized surface for tea tray, kettle, and teaware arrangement | |
| Frame load distribution | Dual-side asymmetrical support prevents tabletop sag under load | |
| Ottoman tuck-away storage | Stools slide fully under table when not in use to save floor space | |
| Surface stain resistance | Non-porous sintered stone allows wet wiping for tea spill cleanup | |
| Knock-down assembly design | Frame attaches to tabletop and bases with included hardware for transport | |
| Floor protection function | Rubber foot pads prevent scuffing on tile, wood, and carpet floors | |
| Modular seating compatibility | Works with 4 matching low stools or adjacent lounge armchairs | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential living room placement | Center of seating area for casual tea service and daily leisure use | |
|---|---|---|
| Small office reception area | Guest waiting space for informal meetings and tea reception | |
| Tea room and lounge space | Dedicated tea tasting area for private small group gatherings | |
| Beauty salon or club lounge | VIP waiting area for customer refreshment and casual seating | |
| Small apartment open plan space | Compact dual function as tea table and occasional low coffee table | |
| Recommended configuration | Pair with 2 matching round ottomans and 1 lounge armchair for balanced seating |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture - Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 12521:2015 | Furniture - Strength, durability and safety for seating, applicable to ottomans |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to cabinet base components | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture, applicable to structural panel components | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable for indoor air safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to cabinet base components; 2. GB/T 4897.3-2015: Particleboard for furniture, applicable to structural panel components; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable for indoor air safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
