| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions (closed) | 1200 x 1200 x 760 mm | |
|---|---|---|
| Overall table dimensions (fully extended) | 2200 x 1200 x 760 mm | |
| Tabletop thickness | 30 mm | |
| Leg cross-section (tapered top) | 50 x 50 mm | |
| Under-table knee clearance height | 680 mm | |
| Per-chair overall dimensions | 480 x 560 x 870 mm | |
| Chair seat height | 480 mm | |
| Chair seat width | 470 mm | |
| Chair seat depth | 480 mm | |
| Chair backrest height | 390 mm | |
| Chair armrest height above seat | 180 mm | |
| Table leg spread width (base) | 1100 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set gross weight | 110 kg | |
|---|---|---|
| Table distributed static load capacity | 100 kg | |
| Per-chair static weight capacity | 113 kg | |
| Seating capacity (closed configuration) | 4 people | |
| Seating capacity (fully extended) | 8 people | |
| Extension slide cycle durability | 10000 cycles | |
| Chair upholstery abrasion resistance | 30000 Martindale cycles | |
| Residential use warranty period | 2 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table legs | Solid natural oak with matte clear lacquer finish | |
|---|---|---|
| Tabletop core and surface | E0-grade engineered wood core with 0.6mm oak veneer, rounded edge | |
| Table extension mechanism | 1.5mm thick cold-rolled steel slides with powder coating | |
| Chair structural frames | Solid natural oak frame with angled A-frame front leg support | |
| Chair upholstery fabric | 280g/sqm linen-polyester blend fabric, light grey tone | |
| Chair seat cushion padding | 40mm thick 35kg/m³ high-density polyurethane foam | |
| Chair backrest padding | 30mm thick 30kg/m³ medium-density polyurethane foam | |
| Foot protection pads | 5mm thick non-slip rubber pads on all leg bases | |
| Assembly hardware | Zinc-plated steel screws, dowels and cam lock connectors | |
| Table finish coating | Matte UV-cured lacquer, 0.15mm dry film thickness | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame |
Adjustment / rotation / tilt / mobility / storage features
| Table extension operation | Integrated split butterfly leaf deploys via metal slides, no separate storage needed | |
|---|---|---|
| Table shape conversion | Converts between rounded square (closed) and long rounded rectangle (extended) | |
| Chair ergonomics | Curved wrap-around upholstered backrest provides lumbar support for upright dining posture | |
| Floor protection function | Rubber foot pads prevent floor scratches and reduce movement noise on hard or carpeted floors | |
| Assembly requirement | Flat-pack assembly required with included hardware and step-by-step instructions | |
| Stability design | Angled tapered legs splay outward from table base to resist tipping during regular use | |
| Surface maintenance | Matte lacquer finish resists common household water stains and allows wiping with soft damp cloth | |
| Seat comfort | Fixed upholstered cushions with moderate foam density support 2+ hours of seated dining use | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential dining room use | Suitable for 8person family meals in apartments or detached homes | |
|---|---|---|
| Open-plan kitchen dining area | Fits compact kitchen spaces when closed, expands for guest dining | |
| Small apartment dining nook | Closed 1200mm square footprint suits small urban dining areas without wasted space | |
| Casual meeting break room use | Appropriate for light commercial office break rooms serving staff and small guest groups | |
| Scandinavian interior scheme matching | Light wood tone and grey fabric upholstery coordinates with Nordic, modern minimalist decor | |
| Family daily use scenario | Stain-resistant finish and durable upholstery support daily meals, homework and casual household activities | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for residential dining tables, applicable to structural performance checks | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating stability determination, applicable to dining chair stability testing | |
| EN 16139:2013 | Furniture - Strength, durability and safety for non-domestic seating, applicable for light commercial use verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to table and chair wood structureAcceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances in wood furniture, applicable to formaldehyde emission checks | |
| GB/T 16799-2008 | Furniture performance test for seating stability, applicable to chair tip resistance verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to table and chair wood structureAcceptance; 2. GB 18584-2001: Indoor decoration material limit of harmful substances in wood furniture, applicable to formaldehyde emission checks; 3. GB/T 16799-2008: Furniture performance test for seating stability, applicable to chair tip resistance verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
