Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	950 × 1520 × 750 mm
Under-table knee clearance height	640 mm
Table leg cross-section	40 x 40 mm square solid wood
Individual chair dimensions	460 x 550 x 940 mm
Chair seat height from floor	460 mm
Chair seat usable area	420 x 400 mm
Chair backrest height above seat	480 mm
Extension leaf individual width	355 mm
Tabletop panel thickness	25 mm
Chair leg cross-section	28 x 28 mm square solid wood
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	76 kg
Tabletop static distributed load capacity	75 kg
Single chair rated user weight capacity	110 kg
Seating capacity (table closed)	4 persons
Seating capacity (table fully extended)	6 persons
Surface finish abrasion resistance	400 cycles
Fastener torque check interval	14 days
Recommended floor protection pad thickness	3 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Table main frame and legs	Solid natural hardwood with clear matte acrylic lacquer finish
Tabletop panel	Edge-glued solid hardwood planks with rounded safety corners
Extension leaf panels	Matching edge-glued solid hardwood with integrated sliding rail hardware
Chair frames and legs	Solid natural hardwood with cross-stretcher bracing for stability
Chair backrest spindles and top rail	Solid turned hardwood spindles with curved shaped top rail
Chair seat panels	Shaped solid hardwood panels with rounded front edge
Extension rail hardware	Powder-coated cold-rolled steel sliding tracks with positive locking stops
Surface finish	Low-VOC clear acrylic lacquer with light natural wood tone
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Table extension mechanism	Dual pull-out integrated leaves with self-locking rails, no separate storage required
Extension operation	Two-person operation to pull table halves apart and deploy leaves to lock position
Chair stability bracing	Full perimeter cross-stretchers between chair legs prevent racking under load
Floor protection compatibility	Pre-drilled leg bases accept 3mm felt floor protectors to prevent surface scratches
Cleaning and maintenance	Wipe clean with mild soapy cloth, dry immediately, avoid prolonged liquid contact
Knock-down assembly	Flat-pack design requires adult assembly with included hex key hardware
Seating ergonomics	Curved seat pan and angled spindle back support upright dining posture for 2+ hour meals
Extension support	Integrated leg supports maintain tabletop flatness at full extended length without separate removable legs
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining rooms	Ideal for 4-person daily meals, expands to seat 6 for family gatherings or small dinner parties
Small apartment open-plan spaces	1520mm closed length fits compact dining nooks adjacent to kitchens or living areas
Scandinavian or minimalist interiors	Light natural wood finish and spindle-back design coordinate with neutral, Japandi or Nordic decor schemes
Rental property furnishing	Durable solid wood construction and flat-pack design suit long-term residential rental installations
Casual breakfast areas	Standard 750mm height pairs with standard dining seating for daily breakfast and casual work use
Indoor dry environments only	Lacquered wood construction is not suitable for outdoor or high-moisture bathroom spaces
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Domestic furniture seating strength, durability and safety requirements, applicable to included dining chairs
EN 1022:2018	Domestic furniture seating stability test methods, applicable to chair anti-tipping verification
EN 15372:2016	Domestic furniture tables strength, durability and safety requirements, applicable to dining table load testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to domestic dining table and chair strength and stability
GB 18584-2001	Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture, formaldehyde emission ≤1.5mg/L
GB/T 10357.1-2013	Furniture mechanical performance test for tables, applicable to tabletop static load and leg strength testing
GB/T 10357.3-2013	Furniture mechanical performance test for chairs, applicable to seat and back static/dynamic load testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to domestic dining table and chair strength and stability;
2. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture, formaldehyde emission ≤1.5mg/L;
3. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable to tabletop static load and leg strength testing;
4. GB/T 10357.3-2013: Furniture mechanical performance test for chairs, applicable to seat and back static/dynamic load testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · EXD-W4S-NW-2230

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · EXD-W4S-NW-2230

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · EXD-W4S-NW-2230Open Export Tool

Quick Actions

Post an RFQ

Product Description

This extendable rectangular dining set pairs a light natural wood table with four matching spindle-back Windsor chairs, designed with a streamlined, understated silhouette rooted in Scandinavian design principles. The closed table presents a clean, proportional rectangular form with rounded safety corners, sitting on square solid wood legs, while the chairs feature classic turned spindle backrests topped with a curved rail, stabilized by full perimeter cross-stretchers between legs to prevent racking under regular use. Every component of the set is built from solid natural hardwood, finished with a low-VOC clear matte acrylic lacquer that highlights the warm light natural wood tone. The tabletop is constructed from edge-glued solid hardwood planks, and its integrated dual pull-out extension leaves use matching solid wood panels fitted with powder-coated cold-rolled steel sliding tracks that lock securely in place, with no separate leaf storage required. Chair seats are shaped solid hardwood panels with rounded front edges, supported by a bent plywood internal board, and all leg bases come pre-drilled to accept felt floor protectors to avoid scratching floor surfaces. The entire set ships in flat-pack knock-down form, with assembly completed using the included hex key hardware. In its closed configuration, the table seats four people for daily meals; when fully extended, it accommodates six for casual gatherings. The ergonomic curved seat pans and angled spindle backs support upright, comfortable posture for extended dining sessions. Maintenance is straightforward: surfaces can be wiped clean with a mild soapy cloth and dried immediately, with care taken to avoid prolonged liquid contact, and fasteners should be checked at the recommended interval to maintain structural stability. This set is well suited for residential dining rooms, compact open-plan small apartment nooks adjacent to kitchens or living areas, casual breakfast zones, and long-term rental property furnishing. Its light wood finish and classic spindle detailing coordinate seamlessly with minimalist, Japandi, or Nordic interior schemes, and it is intended exclusively for indoor dry environments, not suited for outdoor or high-moisture spaces. For procurement, note that assembly takes roughly 40 minutes per set, shipped across two cartons, and the weight-rated load limits for the tabletop and individual chairs should be reviewed to align with intended use cases.

Light Natural Wood Extendable Rectangular Dining Set with 4 Spindle-Back Windsor Chairs Specifications

Suppliers and stock