Product supplierExtendable Round Dining Table with Light Oak Frame and White Marble-Effect Sintered Stone Top, 12mm sintered stone with white grey-veined marble effect
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1350 × 1350 × 775 mm | |
|---|---|---|
| Extended table dimensions (oval) | 1800 x 1350 mm | |
| Tabletop thickness | 51 mm | |
| Leg cross-section dimensions | 60 x 60 mm | |
| Under-table knee clearance height | 710 mm | |
| Perimeter leg inset from table edge | 100 mm | |
| Extension leaf width (each) | 225 mm | |
| Floor clearance under base apron | 680 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 75 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 150 kg | |
| Seating capacity (closed configuration) | 4 people | |
| Seating capacity (extended configuration) | 6 people | |
| Tabletop surface scratch resistance | Class A for sintered stone | |
| Wood frame moisture content | 10% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop panel | 12mm sintered stone with white grey-veined marble effect | |
|---|---|---|
| Table support frame | Solid natural light oak hardwood apron | |
| Support legs | Straight solid oak square legs with clear matte lacquer | |
| Tabletop edge trim | Solid oak edge banding matching frame finish | |
| Extension mechanism hardware | Zinc-plated steel slide glides with leaf lock tabs | |
| Foot pads | Non-slip plastic floor protector pads | |
| Surface finish (wood parts) | Matte clear polyurethane lacquer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Extension mechanism operation | Two stored leaves fold out from tabletop, lock into place to form oval surface | |
|---|---|---|
| Leaf storage | Extension leaves integrate flush into closed round tabletop when not deployed | |
| Floor stability adjustment | Leveling feet on each leg compensate for up to 5mm uneven floor | |
| Surface performance | Sintered stone top resists heat up to 1200°C, stains, and liquid spills | |
| Assembly requirement | Legs attach to pre-assembled table frame with included hex hardware | |
| Locking function | Mechanical leaf locks prevent accidental fold during extended use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room use | Fits 6people for daily meals and casual family gatherings | |
|---|---|---|
| Apartment open-plan dining areas | Compact closed size fits small urban dining zones near living spaces | |
| Combined living-dining balcony spaces | Stable construction suitable for covered indoor balcony dining areas | |
| Small home entertaining use | Extended surface provides additional serving space for guest dinners | |
| Matching with spindle-back oak dining chairs | Designed to coordinate with light wood slat-back dining chair sets |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 71-3:2019 | Safety of toys - Migration of certain elements, applicable for food contact surfaces |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame quality inspection | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 4897.3-2003 | Particleboard requirements for any engineered wood components used in base |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame quality inspection; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 4897.3-2003: Particleboard requirements for any engineered wood components used in base; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool