| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| tabletop sintered stone core thickness | 12 mm | |
| tabletop finished edge thickness | 40 mm | |
| leg cross-section dimension | 60 x 60 mm | |
| under-table knee clearance height | 700 mm | |
| tabletop corner radius | 30 mm | |
| leg setback from table edge | 50 mm | |
| chair leg clearance under apron | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| distributed tabletop static load capacity | 136 kg | |
|---|---|---|
| sintered stone surface heat resistance | 1200 °C | |
| sintered stone Mohs surface hardness | 9 | |
| table unit net weight | 65 kg | |
| recommended maximum diner count | 6 | |
| wood finish moisture content | 10 % | |
| surface stain resistance rating | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop surface layer | 12mm white marble-veined sintered stone | |
|---|---|---|
| tabletop substrate | High-density MDF support board | |
| table edge trim | Solid oak wood veneer edge banding | |
| support legs | Solid natural light oak wood | |
| wood surface finish | Matte UV-cured lacquer | |
| connection hardware | Zinc-plated steel M8 bolt fasteners | |
| apron frame | Solid oak wood perimeter frame | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| table structure | Fixed non-extendable design | |
|---|---|---|
| assembly requirement | Leg attachment to pre-assembled tabletop | |
| surface cleaning | Wipe-clean non-porous surface | |
| floor protection | Felt floor glides pre-installed on leg bases | |
| storage integration | No built-in drawers or shelves | |
| positioning flexibility | Freestanding placement suitable for wall or center room use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential dining room use | Seats 6 people for daily family meals and casual gatherings | |
|---|---|---|
| open-plan kitchen dining area | Scandinavian light wood finish complements modern neutral kitchen interiors | |
| small apartment dining space | Compact 1.8m footprint fits open-plan living areas without crowding | |
| short-term rental furnishing | Durable easy-clean surface suitable for high-turnover rental properties | |
| cafe and small restaurant use | Sturdy solid wood construction supports frequent commercial dining use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture surface test methods for resistance to cold liquids and heat |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame components | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wood furniture, applicable for finish testing | |
| GB/T 4100-2015 | Ceramic tile standards applicable to sintered stone tabletop surface performance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame components; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wood furniture, applicable for finish testing; 3. GB/T 4100-2015: Ceramic tile standards applicable to sintered stone tabletop surface performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
