Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1500 × 1500 × 750 mm
Overall set footprint	1500 x 1500 x 750 mm
Tabletop diameter	1500 mm
Tabletop thickness	19 mm
Table under-apron knee clearance	680 mm
Leg-to-leg floor clearance diameter	1060 mm
Table central post diameter	80 mm
Individual chair overall dimension	520 x 540 x 920 mm
Chair seat width	450 mm
Chair seat depth	420 mm
Chair seat height from floor	450 mm
Chair backrest height from seat	470 mm
Chair stretcher height from floor	150 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Table total net weight	33 kg
Table distributed static load capacity	136 kg
Single chair static weight capacity	113 kg
Seating capacity	6 people
Finish surface abrasion resistance	1000 cycles
Wood moisture content for indoor use	12%
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop	Solid natural oak veneered engineered wood core with clear matte lacquer
Table central support post	Solid rubberwood with matching natural finish
Splayed table legs	Solid rubberwood with angled joinery to central post
Chair seats	Contoured pressed solid wood with rounded edges, matching natural finish
Chair back components	Solid wood vertical spindles, curved top rail, and side supports
Chair legs and stretchers	Solid tapered wood legs with cross-braced stretchers for stability
Surface finish	Clear water-based nitrocellulose lacquer, satin sheen
Floor glides	Non-marking plastic glides fitted to leg bases
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Table configuration	Fixed non-extendable round top, no leaf storage or folding mechanism
Chair seating design	Armless design allows tucking fully under table when not in use
Back support function	Evenly spaced vertical spindles provide upright posture support for long meals
Structural stability	6-way splayed table leg design eliminates wobble on level indoor floors
Chair frame rigidity	Double cross-stretcher bracing on each chair prevents leg racking under load
Surface maintenance	Lacquered surface wipes clean with dry or damp cloth, requires coasters for hot items
Assembly requirement	Knock-down assembly required with included hex hardware and instructions
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Total packaged carton count	4 cartons
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining rooms	Fits 20sqm casual dining areas with light Nordic or Scandinavian decor
Small open-plan kitchen spaces	Compact round design avoids sharp corners for high-traffic family kitchen areas
Apartment breakfast nooks	6-seat capacity accommodates small family meals and casual guest gatherings
Casual cafe seating	Durable solid wood construction suitable for low-traffic independent cafe dining areas
Rental property furnishing	Neutral light wood finish matches most interior palettes for long-term rental staging
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables, recommended for performanceAcceptance
EN 1022:2018	Domestic seating furniture - Strength and durability requirements, applicable for dining chair testing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional and structural inspection
GB 18584-2001	Indoor decoration material limit of formaldehyde emission for wooden furniture, required for indoor residential use

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural inspection;
2. GB 18584-2001: Indoor decoration material limit of formaldehyde emission for wooden furniture, required for indoor residential use;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RD-OAK-6S-WINDSOR-1500

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RD-OAK-6S-WINDSOR-1500

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RD-OAK-6S-WINDSOR-1500Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Light Natural Oak 6-Seater Round Wooden Dining Set with Windsor Spindle Chairs delivers a relaxed Nordic casual aesthetic anchored by clean, curved lines and a consistent light natural wood palette. Its fixed round table anchors the layout, paired with six matching armless spindle-back chairs that tuck fully beneath the tabletop when not in use to reduce unoccupied footprint. Construction combines mixed solid wood and engineered wood components built for regular indoor use: the table features a solid natural oak veneered engineered wood core tabletop finished with clear satin water-based nitrocellulose lacquer, supported by a central solid rubberwood post connected to six splayed solid rubberwood legs with angled joinery for stable placement on level floors. Each chair incorporates contoured pressed solid wood seats with rounded edges, vertical solid wood spindle backs framed by a curved top rail and side supports, and tapered solid wood legs reinforced with double cross-stretchers to resist frame racking under load. Non-marking plastic glides fitted to all leg bases protect floor surfaces from scuffs. Functionally, the set seats six people comfortably, with evenly spaced chair spindles providing upright posture support for extended meals. The six-way splayed table leg design eliminates wobble on level indoor surfaces, while the lacquered finish wipes clean easily with a dry or damp cloth, requiring coasters for hot items to preserve surface integrity. The fixed non-extendable table has no leaf storage or folding mechanisms, streamlining its silhouette for compact spaces. This set suits a range of residential and light commercial settings: 20sqm residential dining rooms with light Nordic or Scandinavian decor, high-traffic open-plan family kitchens where its rounded edge design minimizes collision risks, apartment breakfast nooks for small family meals and casual guest gatherings, low-traffic independent cafe dining areas, and long-term rental properties where its neutral light wood finish complements most interior palettes. Procurement teams and buyers should note the set ships as knock-down units requiring assembly with included hex hardware and printed instructions, with a reference assembly time of 40 minutes per set. Four total cartons are included per full set, with non-marking glides fitted at the factory to reduce post-assembly accessory needs. Buyers should also plan to source coasters for hot tabletop items as part of regular use to maintain finish condition over time.

Light Natural Oak 6-Seater Round Wooden Dining Set with Windsor Spindle Chairs Specifications

Suppliers and stock