Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	660 × 620 × 902 mm
Seat height	521 mm
Seat width	515 mm
Seat depth	457 mm
Leg splay angle from vertical	12 degrees
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	8.6 kg
Static weight capacity	160 kg
Seat foam density	45 kg/m³
Foam rebound rate	60%
Recommended daily use duration	8 hours
Leg static load per leg	45 kg
Surface abrasion resistance (fabric seat)	30000 Martindale cycles
Faux leather stain resistance	Wipe-clean with damp cloth
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Back/arm shell upholstery	Caramel PU faux leather, 0.8 mm thickness
Seat upholstery	Heathered grey polyester-linen blend fabric, 0.6 mm thickness
Seat fill	High-elastic polyurethane foam, 80 mm thickness
Back fill	20 mm thick high-density foam layer over plywood form
Internal seat frame	12 mm thick molded plywood
Support legs	1.2 mm thick black powder-coated tapered steel tubes
Foot caps	Non-marking black plastic glides, 5 mm thickness
Seam stitching	Polyester thread, 8 mm stitch pitch
Surface finish on legs	Matte black powder coating
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Static upright dining posture, no recline or swivel
Integrated armrests	Curved wrap-around arm support continuous with backrest
Floor protection	Non-slip plastic glides prevent floor scratching
Cleaning function	Wipe-clean faux leather back, spot-clean fabric seat
Stacking capability	Non-stackable fixed leg design
Assembly requirement	Knock-down leg attachment with included Allen key
Weight distribution	Four outward-splayed legs provide lateral stability
Seat comfort	Padded foam cushion reduces pressure during extended meals
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Paired with standard 750mm height dining tables for daily family meals
Cafe and bistro seating	Compact footprint suits small commercial dining spaces
Office breakout area	Casual guest seating for meeting and break room spaces
Hotel guest room seating	Compact armchair for room corner or desk use in hospitality
Reception waiting area	Lightweight guest seating for low-traffic reception spaces
Recommended table height	760 mm standard dining table height for ergonomic seating
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Strength, durability and safety for domestic seating furniture
EN 1022:2018	Stability test standard for non-domestic and domestic seating

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for seat frame plywood
GB/T 16799-2008	Faux leather upholstery performance standard for furniture use
GB/T 19001-2016	Quality management system reference for production consistency

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for seat frame plywood;
2. GB/T 16799-2008: Faux leather upholstery performance standard for furniture use;
3. GB/T 19001-2016: Quality management system reference for production consistency;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DC-TT-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DC-TT-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DC-TT-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Curved Wrap-Back Upholstered Dining Armchair (model DC-TT-001, unbranded) features a streamlined modern silhouette defined by a continuous curved wrap-back structure that integrates seamlessly with matching armrests, creating a cohesive, enclosed seating profile. The two-tone finish pairs caramel-toned faux leather on the back and arm shell with heathered grey polyester-linen blend fabric on the seat, anchored by matte black tapered metal legs splayed 12 degrees outward from vertical for balanced visual proportion. Construction prioritizes durable, tactile materials: the 0.8mm thick PU faux leather back shell is molded over a plywood form padded with a 20mm high-density foam layer, while the seat uses a 12mm molded plywood internal frame topped with 90mm of high-elastic polyurethane foam. Tapered steel legs with 1.2mm wall thickness receive a matte black powder-coat finish, fitted with 5mm non-marking, non-slip black plastic glides at the base. Stitching uses durable polyester thread with an 8mm stitch pitch for consistent, long-lasting seam integrity. Designed for static upright dining posture with no recline or swivel function, the chair delivers targeted support via a 240mm high lumbar support zone, with seat foam density of 45kg/m³ and 60% rebound rate suited for up to 8 hours of daily use. The fabric seat offers 30,000 Martindale cycles of abrasion resistance; the faux leather back wipes clean easily, while the fabric seat supports spot cleaning. Each chair supports a static weight capacity of 160kg, with four outward-splayed legs delivering reliable lateral stability, and 45kg static load capacity per individual leg. This chair fits a range of settings: residential dining rooms paired with standard 750mm or 760mm height dining tables, compact cafes and bistros, office breakout areas, hotel guest room corners or desk nooks, and low-traffic reception waiting areas. Its fixed non-stackable design requires knock-down leg assembly with an included Allen key, with a reference assembly time of 40 minutes per set. Procurement teams should note each unit ships across two cartons, with a packaged gross weight of 23kg per set, and 135 sets fit a 20GP container at 85% space utilization. Overall dimensions measure 660 x 620 x 902mm, with a 521mm seat height, 515mm seat width, and 457mm seat depth to align with standard dining table ergonomics.

Two-Tone Curved Wrap-Back Upholstered Dining Armchair Specifications

Suppliers and stock