| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Leg cross-section diameter at floor | 60 mm | |
| Brass ferrule height at leg base | 50 mm | |
| Table corner radius | 50 mm | |
| Under-table knee clearance height | 700 mm | |
| Leg inset from table corner | 50 mm | |
| Table overhang from leg centerline (long side) | 100 mm | |
| Table overhang from leg centerline (short side) | 80 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 120 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 200 kg | |
| Seating capacity | 6 seats | |
| Tabletop surface Mohs hardness | 6 | |
| Tabletop water absorption rate | 0.05% | |
| Tabletop heat resistance temperature | 800 °C | |
| Metal leg finish rust/oxidation resistance | 500 hours salt spray | |
| Structural warranty period | 15 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | Polished grey veined sintered stone | |
|---|---|---|
| Tabletop backing layer | Aluminum honeycomb composite | |
| Table edge finish | Same-material polished rounded edge | |
| Leg core material | Thick-walled carbon steel tube | |
| Leg surface finish | Matte black powder-coated/electroplated coating | |
| Foot ferrule material | Polished solid brass electroplated stainless steel | |
| Leg-to-tabletop connection hardware | M10 zinc-plated steel bolts with locking nuts | |
| Floor protection pad under ferrule | 5mm thick non-slip rubber pad | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Table structure | Fixed non-extendable four-leg construction | |
|---|---|---|
| Surface cleaning property | Stain-resistant non-porous glossy finish | |
| Assembly requirement | Knock-down leg attachment with included hardware | |
| Floor leveling | Adjustable foot pads under brass ferrules | |
| Seating access | Unobstructed perimeter clearance on all four sides | |
| Edge safety | Softly radiused rounded corners and edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | 6-person daily dining for households with open-plan living/dining spaces | |
|---|---|---|
| Apartment open-plan kitchen | Compact 1.8m footprint suitable for urban apartment dining zones | |
| Light luxury hotel guest dining area | Polished stone and metal finish matches boutique hotel interior design | |
| Upscale cafe/light restaurant seating | Stain-resistant easy-clean surface suitable for commercial casual dining | |
| Model home/real estate show home staging | Contemporary light luxury aesthetic matches modern residential display styling |
EU Market Access Requirements* EN Standards
| Furniture mechanical safety for tables | EN 12521:2015 | |
|---|---|---|
| Surface resistance to cold liquids | EN 12720:2013 | |
| Surface resistance to dry heat | EN 12722:2013 |
Standards applicable to China-market projects
| Dining table dimensional stability | GB/T 3324 | |
|---|---|---|
| Formaldehyde emission limit | GB 18584 | |
| Surface coating adhesion | GB/T 4893.4 |
This product must meet the following technical requirements: 1. Dining table dimensional stability: GB/T 3324; 2. Formaldehyde emission limit: GB 18584; 3. Surface coating adhesion: GB/T 4893.4; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
