| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| tabletop thickness | 20 mm | |
| rounded corner radius | 50 mm | |
| under-table leg clearance height | 680 mm | |
| left pedestal footprint | 700 x 400 mm | |
| right pedestal footprint | 600 x 350 mm | |
| pedestal height | 730 mm | |
| edge overhang from pedestal | 150 mm | |
| apron height | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| seating capacity | 6 persons | |
|---|---|---|
| distributed static tabletop load | 150 kg | |
| net product weight | 120 kg | |
| tabletop surface hardness | 7 Mohs | |
| wood base moisture content | 12% | |
| adjustable foot adjustment range | 10 mm | |
| surface heat resistance | 180 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop | 20mm polished white sintered stone with grey marble veining | |
|---|---|---|
| left pedestal curved panel 1 | Dark walnut wood veneer over MDF core | |
| left pedestal curved panel 2 | Matching grey-veined sintered stone | |
| right pedestal | Solid dark wood block with walnut veneer | |
| internal support frame | Powder-coated steel bracket frame | |
| leveling feet | Nylon-padded adjustable metal feet | |
| fasteners | Zinc-plated steel hardware | |
| wood finish | Matte polyurethane lacquer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| assembly requirement | 2-person knock-down assembly | |
|---|---|---|
| floor leveling | Adjustable nylon feet at each pedestal base | |
| surface maintenance | Non-porous wipe-clean tabletop | |
| seating access | Open perimeter seating on all four sides | |
| structural stability | Dual offset pedestal weight distribution | |
| safety design | Soft rounded tabletop corners | |
| fixed non-extendable structure | Permanent fixed tabletop length | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential dining room | 6-seat configuration for family daily meals and small gatherings | |
|---|---|---|
| open-plan kitchen dining area | Contemporary mixed-material design matches modern kitchen finishes | |
| small restaurant dining area | Durable stone surface suitable for commercial light-traffic use | |
| apartment dining nook | Compact 1800mm length fits standard urban apartment dining spaces | |
| showroom display set | Pairs with matching black upholstered wood-back dining chairs for visual display | |
| hotel guest room dining zone | Low-maintenance stone surface for hospitality housekeeping efficiency |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB/T 4897.3-2003 | Particleboard for furniture use | |
| GB 6566-2010 | Limit of radionuclides in building materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB/T 4897.3-2003: Particleboard for furniture use; 3. GB 6566-2010: Limit of radionuclides in building materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
