Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 457 × 680 mm
Top surface thickness	15 mm
Drawer internal dimensions	316 x 234 x 100 mm
Leg height (floor to body bottom)	150 mm
Leg diameter at top connection	34 mm
Leg diameter at floor contact	24 mm
Body height (excluding legs)	445 mm
Floor clearance under drawer front	150 mm
Center support leg projection below body	130 mm
Recessed half-moon pull cutout width	80 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Top surface static load capacity	18 kg
Unit net weight	22 kg
Recommended maximum user weight for edge seating	50 kg
Drawer slide cycle durability	20000 open/close cycles
Surface scratch resistance	Class 2 (1.5N abrasion)
Surface water resistance	Resists 24-hour cold liquid ring staining
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Main carcass panels	15 mm engineered particleboard with light oak melamine finish, fluted/ribbed side texture
Drawer front panel	12 mm MDF with matte white UV-cured foil finish, recessed half-moon cutout pull
Legs (4 splayed + 1 center support)	Solid pine wood with clear lacquer finish, tapered cylindrical profile
Drawer side/back panels	12 mm engineered MDF with smooth melamine interior finish
Drawer glide hardware	Cold-rolled steel 3/4 extension telescopic slides with zinc plating
Edge banding	0.4 mm PVC edge banding matching light oak and white panel colors
Leg foot pads	Non-marking black rubber pads bonded to leg bases to protect hard flooring
Joinery hardware	Zinc-plated steel confirmat screws and cam-lock connectors for RTA assembly
Back panel	3 mm hardboard with light oak finish, fitted into recessed carcass grooves
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Drawer operation	Horizontal pull-out 3/4 extension via recessed half-moon cutout, no exposed hardware, stays closed on level floors
Top surface use	Flat level surface sized to hold table lamps, small books, phone chargers and decorative items
Floor cleaning access	150 mm under-body clearance allows standard robot vacuum and broom access without moving the unit
Stability design	Five-point leg support (four splayed outer legs + one central rear leg) reduces tipping risk when loaded on one edge
Assembly type	Flat-pack RTA assembly with cam-lock and screw connections, no special power tools required
Floor protection	Rubber foot pads prevent scuffs and scratches on hardwood, tile and vinyl flooring, minimize sliding on smooth surfaces
Storage function	Single enclosed drawer stores small bedroom essentials including reading glasses, chargers, notebooks and skincare items
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential bedroom use	Placed adjacent to twin, full or queen size beds for bedside storage of nighttime essentials
Living room accent use	Used as narrow end table beside sofas or armchairs to hold drinks, remotes and small decor
Small space / studio use	Suitable for micro-apartments and studio units with limited floor space due to narrow compact footprint
Short-term rental furnishing	Appropriate for Airbnb, homestay and serviced apartment fit-outs for durable, on-trend bedside storage
Dormitory room use	Fits beside student dorm beds to hold study supplies, phone chargers and personal items
Commercial hotel guest room use	Suitable for select-service hotel guest rooms as a compact bedside table with concealed storage

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Strength, durability and safety requirements applicable to residential storage furniture
EN 14749:2016	Safety requirements for domestic and kitchen storage units and worktops
EN 717-1:2004	Formaldehyde emission test method for wood-based panels used in furniture
EN 13722:2004	Test methods for strength and durability of furniture drawers and slides

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements applicable for domestic wooden bedroom furniture quality checks
GB 18584-2001	Formaldehyde emission limit requirement for interior decoration wood-based panel furniture
GB/T 4893.4-2013	Surface abrasion resistance test method applicable to laminate furniture finish testing
GB/T 4893.9-2013	Surface cigarette burn resistance test method applicable to horizontal top surfaces

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements applicable for domestic wooden bedroom furniture quality checks;
2. GB 18584-2001: Formaldehyde emission limit requirement for interior decoration wood-based panel furniture;
3. GB/T 4893.4-2013: Surface abrasion resistance test method applicable to laminate furniture finish testing;
4. GB/T 4893.9-2013: Surface cigarette burn resistance test method applicable to horizontal top surfaces;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · MCM-1DRW-LTOK-WHT-NS

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · MCM-1DRW-LTOK-WHT-NS

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · MCM-1DRW-LTOK-WHT-NSOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This mid-century modern single-drawer nightstand features a light oak frame paired with a crisp matte white drawer front, defined by fluted ribbed side panels, gently splayed tapered legs, and clean, uncluttered lines that align with timeless retro-modern design sensibilities. The unit rests on four solid pine wood tapered cylindrical legs finished with clear lacquer, plus one central rear support leg to create a stable five-point base, with non-marking black rubber foot pads bonded to each leg base to protect hard flooring and reduce unwanted sliding. The main carcass is built from 15mm engineered particleboard with a light oak wood-effect melamine finish, trimmed with color-matched 0.4mm PVC edge banding, while the drawer front is crafted from 12mm MDF with a matte white UV-cured foil finish and integrated recessed half-moon cutout pull that eliminates exposed hardware. The drawer itself runs on zinc-plated cold-rolled steel 3/4 extension telescopic slides, rated to withstand 20,000 open-close cycles, and stays securely closed on level floors. Internal drawer space holds small everyday essentials, while the flat top surface accommodates table lamps, books, chargers, and decorative items, supporting a static load of 18kg. The 150mm under-body clearance allows full access for standard brooms and robot vacuums without moving the unit. Surfaces hold up to Class 2 scratch resistance at 1.5N abrasion, and resist 24-hour cold liquid ring staining to maintain a polished appearance with regular use. The unit ships as flat-pack ready-to-assemble furniture, secured with zinc-plated confirmat screws and cam-lock connectors that require no special power tools for setup, with an assembly time of 40 minutes per unit. Its compact footprint suits placement adjacent to twin, full, and queen size beds in residential bedrooms, student dormitories, and select-service hotel guest rooms. It also works as a narrow accent end table beside living room sofas and armchairs, fits seamlessly in micro-apartments and studio units with limited floor space, and serves as a durable, style-aligned furnishing for short-term rentals and serviced apartments. When procuring, note the unit is unbranded, ships across multiple cartons per set, and supports a maximum 50kg weight for brief edge seating to avoid misuse.

Mid-Century Modern Single-Drawer Nightstand, Light Oak Frame with White Drawer Front Specifications

Suppliers and stock