| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| TV console overall dimensions (extended) | 3600 x 400 x 400 mm | |
|---|---|---|
| Square coffee table overall dimensions | 1000 x 1000 x 480 mm | |
| Round nesting coffee table overall dimensions | 630 x 630 x 500 mm | |
| TV console drawer internal dimensions | 330 x 132 x 100 mm | |
| TV console base ground clearance | 200 mm | |
| TV console cable opening diameter | 60 mm | |
| Square coffee table drawer internal dimensions | 450 x 450 x 120 mm | |
| Round table base diameter | 600 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| TV console top static load capacity | 100 kg | |
|---|---|---|
| Console drawer slide rated cycle life | 50000 cycles | |
| Recommended maximum TV size compatibility | 100 inch | |
| Set total net weight reference | 145 kg | |
| Sintered stone surface heat resistance | 200 °C | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| TV console body construction | 18mm CARB P2 grade engineered MDF with matte dark gray lacquer finish | |
|---|---|---|
| TV console and square table tops | 12mm matte sintered stone with marble-effect gray veining | |
| Drawer hardware | Zinc alloy gold-tone bar pulls with soft-close undermount slides | |
| Square coffee table legs | Tapered solid wood legs with dark gray stain finish | |
| Round coffee table top | 10mm thick tempered black safety glass with high-gloss finish | |
| Round coffee table base | Powder-coated metal inner frame wrapped in woven grid-textured fabric | |
| Adjustable foot pads | Non-slip TPE plastic pads fitted to all furniture leg bases | |
| TV console back panel | 5mm thick engineered hardboard with pre-cut cable access openings | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Console extendable side deck | Manual pull-out right-side deck to extend surface length for display items | |
|---|---|---|
| Nesting table design | Smaller round table slides partially under square table to reduce floor space when not in use | |
| Soft-close drawer operation | All 5 drawers (3 on console, 2 on square table) close silently with damped motion | |
| Cable management access | Rear panel cutouts allow routing of TV and media device power/AV cables | |
| Ventilation design | Raised base clearance provides air flow for media devices stored inside drawers | |
| Rounded corner safety | All external top and body corners are radiused to reduce impact injury risk | |
| Reversible extension configuration | Console pull-out deck can be installed on left or right side to fit room layout | |
| Cable / Vent Opening Reference | 80 mm diameter; recommend 4rear cable/vent openings |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Positioned against a wall under wall-mounted flat-screen televisions up to 100 inches | |
|---|---|---|
| Space-saving open-plan layouts | Nesting tables and extendable console adapt to small or large living room floor plans | |
| Modern luxury interior schemes | Dark gray finish with gold accents and stone tops complements contemporary minimalist decor | |
| Multi-functional surface use | Table tops support decor items, table lamps, snacks, drinks, and media accessories | |
| Low-profile lounge configuration | Low 500 mm height aligns with standard sofa seat heights for comfortable viewing |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable to both coffee tables | |
|---|---|---|
| EN 14749:2016 | Domestic and kitchen storage units - Safety and performance, applicable to TV console | |
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass for round table top |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood cabinet and table components | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture | |
| GB/T 3325-2017 | Test methods for metal furniture hardware, applicable to drawer slides and pulls |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood cabinet and table components; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture; 3. GB/T 3325-2017: Test methods for metal furniture hardware, applicable to drawer slides and pulls; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
