Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1200 × 660 × 457 mm
Tabletop thickness	30 mm
Leg diameter at floor contact	35 mm
Splayed leg outward angle	12 degrees
Under-table floor clearance	427 mm
Tabletop edge radius	60 mm
Leg spacing along long edge	820 mm
Leg spacing along short edge	460 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Tabletop distributed static load	23 kg
Net product weight	16 kg
Leg joint vertical pull-out resistance	50 kg
Recommended maximum place setting count	4
Surface impact resistance	1.2 J
Warranty period	2 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop substrate	18mm thick E1 grade engineered wood particleboard
Tabletop finish	Matte white UV-cured lacquer coating, 0.15mm dry film thickness
Leg construction	Solid natural beech wood, clear matte natural finish
Leg mounting hardware	Zinc-plated M8 hanger bolts with steel threaded inserts
Underside support bracing	20mm thick solid wood cross cleats at leg attachment points
Edge treatment	Rounded profile matching tabletop material, fully lacquered to match surface
Foot pads	5mm thick non-slip PE floor protection pads at each leg base
Moisture content of wood components	10%
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Structural configuration	Fixed non-folding, non-height-adjustable rigid frame
Floor protection	PE foot pads prevent floor scratches and reduce sliding on hard surfaces
Surface maintenance	Matte finish resists minor liquid stains and wipes clean with damp cloth
Assembly method	Knock-down flat pack, legs attach to underside with included hex key
Load distribution	Four splayed legs spread weight evenly for stable placement on low-pile rugs
Edge safety	Rounded oval edges eliminate sharp corners for household use
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Primary placement	Central position in front of 3seater fabric or leather sofas in residential living rooms
Secondary application	Small apartment lounge or studio open seating areas with low-profile seating
Commercial application	Casual lounge areas in boutique offices, co-working spaces or cafe waiting zones
Floor compatibility	Suitable for placement on low-pile rugs, hardwood, laminate and tile flooring
Recommended complementary pieces	Fabric lounge sofas, light wood side tables, neutral toned area rugs

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture for domestic use, tables: safety, strength and durability requirements
EN 13722:2004	Furniture: assessment of surface resistance to cold liquids for coated furniture tops

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance checks
GB 18584-2001	Indoor decoration material limit of formaldehyde emission for wooden furniture, required for E1 grade substrate verification
GB/T 4893.4-2013	Surface film adhesion test for furniture finishes, applicable for lacquer coating durability checks

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety and dimensional tolerance checks;
2. GB 18584-2001: Indoor decoration material limit of formaldehyde emission for wooden furniture, required for E1 grade substrate verification;
3. GB/T 4893.4-2013: Surface film adhesion test for furniture finishes, applicable for lacquer coating durability checks;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-OVL-WHT-SW-1200

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-OVL-WHT-SW-1200

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-OVL-WHT-SW-1200Open Export Tool

Quick Actions

Post an RFQ

Product Description

This modern Nordic oval coffee table features a clean, minimalist silhouette defined by a smooth matte white oval tabletop with fully rounded edges, supported by four splayed natural solid beech wood legs angled outward for a balanced, open visual profile. The fixed four-leg structure creates generous under-table clearance, with evenly spaced legs that maintain an uncluttered, airy aesthetic suited to understated interior schemes. The tabletop is constructed from E1 grade engineered wood particleboard, finished with a matte white UV-cured lacquer coating that carries a smooth, low-sheen appearance. Legs are crafted from solid natural beech wood with a clear matte finish, secured to the tabletop underside via zinc-plated M8 hanger bolts paired with steel threaded inserts, reinforced by solid wood cross cleats at each attachment point for rigid frame stability. Each leg base is fitted with non-slip PE floor protection pads, and all tabletop edges follow a rounded profile fully finished to match the top surface. Designed as a fixed non-folding, non-height-adjustable piece, the table supports stable placement on low-pile rugs, hardwood, laminate and tile flooring, with splayed legs that distribute weight evenly across surfaces. The matte surface resists minor liquid stains and wipes clean easily with a damp cloth, while rounded edges eliminate sharp corners for safe everyday household use. The integrated cable management system accommodates power and data cables for convenient setup of connected devices, and the table comfortably serves up to four place settings for casual use. It is ideally positioned as a central anchor in front of three-seater fabric or leather sofas in residential living rooms, and works equally well in small apartment lounges or studio open seating areas paired with low-profile seating. For commercial settings, it fits naturally in casual lounge areas of boutique offices, co-working spaces and cafe waiting zones, pairing seamlessly with fabric lounge sofas, light wood side tables and neutral toned area rugs. Procurement teams and residential buyers should note the product ships as a knock-down flat pack across two cartons, with assembly completed using the included hex key. It comes with a 2-year warranty, and buyers should plan for appropriate handling of packaged units during delivery, as well as accounting for assembly time when scheduling installation. The fixed rigid structure does not offer folding or height adjustment, so placement planning should align with intended permanent use positions.

Modern Nordic Oval White Coffee Table with Solid Wood Splayed Legs Specifications

Suppliers and stock