| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimension | 1500 x 900 x 760 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Apron height | 80 mm | |
| Apron bottom clearance above floor | 650 mm | |
| Leg top section diameter | 50 mm | |
| Leg bottom section diameter | 30 mm | |
| Leg outward splay angle | 7 degrees | |
| Edge radius | 15 mm | |
| Knee clearance height | 650 mm | |
| Seating space per place setting | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load | 100 kg | |
|---|---|---|
| Single leg vertical static load | 80 kg | |
| Recommended seating capacity | 4 people | |
| Net product weight | 38 kg | |
| Finish scratch resistance cycle rating | 400 cycles | |
| Wood moisture content | 10% | |
| Connector shear strength | 120 kg per fitting | |
| Adjustable foot height adjustment | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Solid hardwood (oak/walnut option) with matte oiled finish | |
|---|---|---|
| Support apron frame | Solid hardwood matching tabletop, mortise and tenon reinforced joinery | |
| Table legs | Solid hardwood tapered profile, outward angled for stability | |
| Edge treatment | Hand-sanded rounded bevel, no sharp corners | |
| Assembly hardware | Zinc-plated steel Allen bolt fittings with threaded wood inserts | |
| Foot pads | Non-marking nylon adjustable glides for uneven floors | |
| Finish coating | Low-VOC matte natural oil finish, 0.05mm dry film thickness | |
| Joint reinforcement | Wood dowel and glue reinforcement at apron-leg connections | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Two seats per long side, no end extension leaves, fixed 4-person layout | |
|---|---|---|
| Leg level adjustment | Rotating nylon glides adjust up to 10mm to compensate for uneven floor surfaces | |
| Surface use compatibility | Suitable for hot dinnerware up to 70C with placemat protection per standard oiled wood guidance | |
| Assembly requirement | Leg attachment to pre-fitted apron frame using included Allen key, no on-site joinery required | |
| Floor protection | Non-marking nylon foot pads prevent scuffing on hard flooring and low-pile carpet | |
| Cleaning requirement | Wipe with dry or slightly damp cloth, reapply wood oil annually to maintain finish | |
| Structural stability | Outward splayed legs reduce tipping risk when weight is applied to table edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Fits compact 4-person dining nooks or open-plan living spaces with Scandinavian decor | |
|---|---|---|
| Small apartment eat-in kitchen | 1500mm length works in tight kitchen spaces without blocking walkways | |
| Home office meeting nook | Suitable for 4-person small team meetings or casual work sessions with 760mm work height | |
| Light commercial cafe seating | Durable solid wood construction works for low-traffic casual dining cafe spaces | |
| Open-plan lounge seating area | Natural wood finish complements neutral-toned soft seating in open lounge areas | |
| Studio apartment multi-use surface | Doubles as work desk and dining surface for small urban studio units |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture seating strength/durability/ stability, applicable for matching dining set use | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test method, applicable for leg stability verification | |
| EN 71-3:2019 | Toy safety migration of elements, applicable if used in home dining areas with children present |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of formaldehyde emission for wood furniture, applicable for emissions testing | |
| GB/T 4893.4-2013 | Surface wear resistance test for furniture coatings, applicable for finish durability acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural acceptance; 2. GB 18584-2001: Indoor decoration material limit of formaldehyde emission for wood furniture, applicable for emissions testing; 3. GB/T 4893.4-2013: Surface wear resistance test for furniture coatings, applicable for finish durability acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
