| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 760 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Corner radius | 50 mm | |
| Leg frame wall thickness | 40 mm | |
| Under-table knee clearance height | 710 mm | |
| Trestle base footprint width | 500 mm | |
| Trestle base longitudinal depth | 600 mm | |
| Edge clearance between trestle units | 1200 mm | |
| Floor contact pad size | 40 x 100 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 70 kg | |
|---|---|---|
| Distributed static top load | 100 kg | |
| Seating capacity | 6 diners | |
| Finish abrasion resistance | 4000 cycles | |
| Wood moisture content | 10% | |
| Warranty period | 2 years | |
| Color variant count | 1 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop construction | Grade A solid oak planks, edge glued, uniform grain pattern | |
|---|---|---|
| Tabletop finish | Matt clear lacquer, 0.15mm coating thickness | |
| Trestle base frame | Solid oak engineered open wishbone geometry, mitered joints | |
| Joinery hardware | 8mm steel confirmat screws with wood dowel alignment | |
| Floor protection pads | Felt pads affixed to all base contact points | |
| Edge profile | Bullnose rounded edge, 3mm radius profile | |
| Wood finish treatment | UV-cured clear topcoat, stain-resistant | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Seating access | Unobstructed open understructure allows seating on all four sides | |
|---|---|---|
| Assembly requirement | Knock-down flat pack assembly, base attached to top with included hardware | |
| Surface stability | Dual trestle base design eliminates wobble on level floors | |
| Surface maintenance | Non-porous lacquer finish allows wipe-clean of food and liquid spills | |
| Floor protection | Felt contact pads prevent scuffing on hardwood and tile flooring | |
| Weight distribution | Wide angled trestle feet spread load evenly to avoid floor indentation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 6-person daily meals and casual gatherings in modern homes | |
|---|---|---|
| Scandinavian style interiors | Complements light wood, minimalist and Japandi design schemes | |
| Open plan kitchen diners | Open trestle base maintains visual lightness in compact open spaces | |
| Small commercial cafe spaces | Durable enough for light commercial cafe and co-working dining use | |
| Apartment living spaces | Flat pack packaging allows easy transport to multi-story residential units |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Test methods for surface finishes of wooden furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dimensional and safety checks | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dimensional and safety checks; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
