| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1200 x 600 x 450 mm | |
|---|---|---|
| Tabletop thickness | 80 mm | |
| Tapered leg height | 150 mm | |
| Tapered leg top section diameter | 50 mm | |
| Front pull-out drawer internal dimensions | 520 x 480 x 120 mm | |
| Slatted-door storage compartment internal dimensions | 520 x 480 x 200 mm | |
| Vertical slat gap width on cabinet door | 12 mm | |
| Floor clearance under table apron | 120 mm | |
| Rounded corner radius | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load capacity | 100 kg | |
|---|---|---|
| Net product weight | 35 kg | |
| Recommended maximum number of users | 4 | |
| Finish water resistance rating | Level 2 for daily water stain resistance | |
| Structural warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Solid rubberwood with natural matte water-based open-pore finish | |
|---|---|---|
| Table body frame and panels | Kiln-dried solid rubberwood with mortise-and-screw reinforced joints | |
| Tapered support legs | Solid rubberwood with angled splay design, pre-installed threaded mounting inserts | |
| Drawer front panel | Solid rubberwood with integrated semi-circular cutout pull handle | |
| Slatted cabinet door | Solid rubberwood vertical slats, framed construction with magnetic catch closure | |
| Drawer glides | Cold-rolled steel side-mounted 3/4 extension glides | |
| Interior storage shelf | 15mm thick solid rubberwood fixed panel | |
| Surface finish | Low-VOC matte water-based lacquer, 2 coat application | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Front pull-out drawer | 3/4 extension glide operation for storing small living room items like remotes and coasters | |
|---|---|---|
| Slatted door enclosed cabinet | Magnetic push-to-close door with vented slats for storing linens and media accessories | |
| KD leg assembly | Threaded leg mounting allows tool-free leg attachment for flat pack shipping | |
| Rounded corner safety design | Soft-edged table corners reduce impact injury risk in high-traffic living spaces | |
| Vented slat door design | Air circulation through slats prevents musty odors in enclosed stored soft goods | |
| Leveling adjustment | Plastic foot glides on leg bases adjust 5mm to compensate for uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment living room | 1.2m compact footprint fits in 25sqm living spaces in front of 3seater sofas | |
|---|---|---|
| Casual lounge area | Low 450mm height aligns with standard sofa seat height for convenient beverage and snack placement | |
| Rental property furnishing | Durable solid wood construction and simple assembly support cost-effective long-term rental staging | |
| Minimalist/Japandi interior schemes | Light natural wood finish and clean lines match Nordic and Japanese wabi-sabi design aesthetics | |
| Family media room use | Enclosed storage hides clutter while tabletop holds media devices, snacks and decorative items |
EU Market Access Requirements* EN Standards
| EN 12521:2015 Furniture - Strength, durability and safety for domestic tables | Applies to static load, impact and stability performance requirements for residential table products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to structural dimensional tolerance, finish adhesion and joint strength requirements for production inspection | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applies to formaldehyde and heavy metal emission limits for finished product acceptance |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to structural dimensional tolerance, finish adhesion and joint strength requirements for production inspection; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applies to formaldehyde and heavy metal emission limits for finished product acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
