| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 600 x 480 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Lower shelf dimensions | 800 x 400 mm | |
| Lower shelf height from floor | 200 mm | |
| Under-table clearance below top surface | 455 mm | |
| Metal frame tube cross-section | 40 x 20 mm | |
| Frame wall thickness | 1.5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop distributed static load | 68 kg | |
|---|---|---|
| Lower shelf static load | 30 kg | |
| Product net weight | 22 kg | |
| Finish abrasion resistance | Grade 2, 2000 cycles | |
| Floor contact static stability | Pass 10° tilt test | |
| Recommended service life | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Frame structure | Carbon steel rectangular tube with welded joints | |
|---|---|---|
| Frame finish | Matte black electrostatic powder coating | |
| Tabletop panel | High-density particleboard core with matte black melamine laminate | |
| Lower shelf panel | High-density particleboard core with matte black melamine laminate | |
| Floor contact pads | Non-marking polyethylene glides | |
| Hardware fasteners | Zinc-plated steel bolts and barrel nuts | |
| Panel edge banding | 1mm thick matte black PVC edge banding | |
| Weld finish | Ground smooth welds at frame joints | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Primary tabletop surface | Flat level surface for placing drinks, decor, and reading materials | |
|---|---|---|
| Lower offset shelf | Open auxiliary storage for magazines, remotes, or small decor items | |
| Floor stability adjustment | Fixed polyethylene glides with no height adjustment | |
| Assembly requirement | Knockdown assembly with included hex key and hardware | |
| Cleaning maintenance | Wipe clean with damp soft cloth, no harsh abrasives | |
| Mobility | Stationary design, no casters or lift mechanisms | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of sofas for serving, decor, and everyday living room use | |
|---|---|---|
| Small apartment spaces | Open frame design creates lightweight visual presence for compact living areas | |
| Office lounge and waiting areas | Used in reception or break areas for guest refreshments and reading materials | |
| Modern minimalist interiors | Geometric open frame and monochrome finish suit contemporary, industrial, and Nordic design schemes | |
| Hard flooring surfaces | Non-marking glides prevent scuffs on wood, tile, and vinyl flooring |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applies to safety, strength and durability requirements for domestic tables | |
|---|---|---|
| EN 1022:2019 | Applies to stability testing for domestic seating and tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applies to general technical requirements for wooden furniture for indoor use | |
|---|---|---|
| GB/T 1730-2007 | Applies to paint film hardness testing for metal furniture surfaces | |
| GB/T 4893.8-2013 | Applies to surface wear resistance testing for furniture panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applies to general technical requirements for wooden furniture for indoor use; 2. GB/T 1730-2007: Applies to paint film hardness testing for metal furniture surfaces; 3. GB/T 4893.8-2013: Applies to surface wear resistance testing for furniture panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
