| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1000 x 760 mm | |
|---|---|---|
| Tabletop thickness | 40 mm | |
| Floor to apron clearance | 670 mm | |
| Apron depth | 76 mm | |
| Leg cross-section | 50 x 50 mm square | |
| Leg inset from table corners | 120 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load | 181 kg | |
|---|---|---|
| Unit net weight | 85 kg | |
| Finish abrasion resistance | 2000 cycles | |
| Wood moisture content | 10% | |
| Frame joint static load | 136 kg per leg | |
| Warranty period | 3 years | |
| Seating capacity per side | 4 seats | |
| Total seating capacity | 8 seats | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | Solid hardwood core with light natural oak veneer | |
|---|---|---|
| Tabletop finish | Low-VOC scratch-resistant clear lacquer | |
| Legs | Solid square tapered oak wood legs | |
| Apron frame | Solid wood apron with notched leg joint detail | |
| Joinery hardware | Zinc-plated steel confirmat screws with wood dowel reinforcement | |
| Leg base pads | 10mm thick non-slip nylon floor protection pads | |
| Edge detail | 2mm eased mitered tabletop edge | |
| Finish coating thickness | 0.15mm | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly with included hardware and illustrated instructions | |
|---|---|---|
| Floor adaptability | Optional adjustable nylon levelers on leg bases | |
| Under-table clearance | Open unobstructed clearance on all four sides | |
| Surface performance | Stain-resistant sealed surface suitable for food and beverage use | |
| Seating compatibility | Accommodates standard dining chairs with 480 mm seat height | |
| Structural rigidity | Reinforced apron frame prevents tabletop warping and wobble | |
| Color availability | Available in natural light oak, walnut, white, black finishes | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Office breakrooms | Provides 8-person seating for staff meals and informal collaboration | |
|---|---|---|
| Residential dining rooms | Seats 8 guests for family meals and casual dinner gatherings | |
| Casual cafe seating | Suitable for light commercial hospitality use with durable sealed finish | |
| Open co-working lounges | Creates shared communal dining and work surface for flexible spaces | |
| Staff pantries | Wipe-clean surface resists spills for daily high-frequency break area use |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applicable for strength, durability and safety of domestic dining tables | |
|---|---|---|
| EN 71-3:2019 | Applicable for migration of certain elements for furniture used in public spaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements of wooden furniture | |
|---|---|---|
| GB 18584-2001 | Applicable for limit of formaldehyde emission in wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements of wooden furniture; 2. GB 18584-2001: Applicable for limit of formaldehyde emission in wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
