| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1370 x 650 x 450 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Tabletop corner radius | 30 mm | |
| Leg cross-section | 80 x 80 mm | |
| Under-table floor clearance | 120 mm | |
| Edge overhang from leg face | 20 mm | |
| Apron height under tabletop | 60 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 26 kg | |
|---|---|---|
| Distributed tabletop static load | 50 kg | |
| Recommended place setting capacity | 4 place settings | |
| Finish scratch resistance rating | 2H pencil hardness | |
| Wood moisture content at delivery | 12% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop construction | Solid kiln-dried hardwood planks, edge-glued | |
|---|---|---|
| Table legs | Solid square-section hardwood, fixed corner mount | |
| Connecting apron | Solid hardwood apron, mitered corner joinery | |
| Surface finish | Clear non-toxic matte nitrocellulose lacquer | |
| Assembly hardware | Zinc-plated steel barrel bolts and wood screws | |
| Corner connection brackets | 2mm thick steel L-brackets with pre-drilled holes | |
| Foot pads | 8mm thick non-slip polyethylene pads on leg bases | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Surface function | Flat level surface for serving drinks, snacks and decor | |
|---|---|---|
| Assembly requirement | Knockdown assembly with included hardware, full tabletop pre-finished | |
| Floor protection | Non-marking foot pads prevent abrasion to tile and wood flooring | |
| Edge safety | Rounded tabletop corners eliminate sharp impact points | |
| Structural stability | Four corner leg configuration provides even weight distribution on flat floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned in front of sofas for snack, drink and decor display | |
|---|---|---|
| Small apartment use | Compact footprint fits limited floor space in studio and small living areas | |
| Casual lounge spaces | Suitable for lounge areas and recreation rooms for light serving use | |
| Low-seating configuration | Works with floor cushions and low sofa seating for casual gathering setups |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 71-3:2019+A1:2021 | Migration of certain elements, applicable if used in households with children |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural inspection | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wood furniture, applicable for formaldehyde emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural inspection; 2. GB 18584-2001: Limit of harmful substances in wood furniture, applicable for formaldehyde emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
