| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2400 x 1000 x 750 mm | |
|---|---|---|
| tabletop thickness | 45 mm | |
| leg cross-section | 50 x 50 mm | |
| end U-frame stretcher height | 100 mm | |
| central longitudinal stretcher height | 120 mm | |
| under-table knee clearance height | 705 mm | |
| lengthwise overhang per end | 150 mm | |
| widthwise overhang per side | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| distributed tabletop static load | 150 kg | |
|---|---|---|
| table net weight | 70 kg | |
| seating capacity | 8 persons | |
| finish abrasion resistance | 1000 cycles | |
| wood moisture content | 12% | |
| joint static shear load | 500 kg per connector | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop | Solid hardwood, walnut brown matte lacquer finish | |
|---|---|---|
| vertical legs | Solid hardwood, matching walnut stain, tapered profile | |
| end U-frame stretchers | Solid hardwood, floor-mounted support feet | |
| central longitudinal stretcher | Solid hardwood, cross-braced between end frames | |
| surface finish | Low-VOC matte nitrocellulose lacquer, 0.15mm dry film thickness | |
| assembly hardware | Zinc-plated steel bolts and barrel nuts, 8mm diameter | |
| floor contact pads | Non-marking felt pads, 5mm thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| base support structure | Dual U-shaped end trestles connected by full-length central stretcher for lateral rigidity | |
|---|---|---|
| assembly type | Knock-down flat-pack assembly with included hardware and instructions | |
| seating access | Open under-table clearance to accommodate 3 chairs per long side and 1 per end | |
| floor protection | Felt pads on all base feet prevent scratches to hard flooring surfaces | |
| surface maintenance | Matte finish resists minor water rings, wipes clean with dry or damp soft cloth | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential dining room | Seats 8people for family meals and casual gatherings | |
|---|---|---|
| open-plan kitchen diner | Walnut brown finish complements modern and mid-century interior schemes | |
| small office break room | Provides durable seating for staff meal breaks and informal meetings | |
| restaurant private dining booth | Works for fixed premium dining seating with stable trestle base |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for performance testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural tolerance checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture, applicable for formaldehyde emission verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structural tolerance checks; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture, applicable for formaldehyde emission verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
