| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 950 x 780 mm | |
|---|---|---|
| Tabletop thickness | 50 mm | |
| Under-apron knee clearance | 660 mm | |
| Leg cross-section | 80 x 80 mm | |
| Apron height | 70 mm | |
| Long-side intermediate leg spacing | 900 mm | |
| End clearance between corner legs | 790 mm | |
| Floor glide height | 5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load | 136 kg | |
|---|---|---|
| Seating capacity | 6 persons | |
| Net product weight | 78 kg | |
| Per-leg vertical static load rating | 45 kg | |
| Surface water resistance rating | Level 2, resistant to 24-hour cold water spills | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | Solid natural white oak planks, jointed for flat stability | |
|---|---|---|
| Tabletop finish | Clear matte UV-cured lacquer, 0.15mm dry film thickness | |
| Leg material | Solid square oak sections, matched grain to tabletop | |
| Apron frame | Solid oak hardwood, connected with reinforced hardware joints | |
| Floor glides | Non-marking high-density polyethylene pads | |
| Joint connectors | Zinc-plated steel confirmat screws with dowel alignment | |
| Wood moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Table structure | Fixed non-extendable rectangular top, no leaf storage or expansion mechanism | |
|---|---|---|
| Leg configuration | 6 total legs: 4 at corners, 1 midpoint per long side for structural rigidity | |
| Under-table access | Full open perimeter legroom with no central modesty panel or cross-bracing obstruction | |
| Floor adjustment | Fixed non-adjustable glides, designed for level hard floor surfaces | |
| Surface maintenance | Wipe-clean finish, resistant to common household food and beverage spills | |
| Assembly type | Knock-down flat-pack assembly, legs and aprons attach to tabletop with included hardware | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 6-person family meals and casual gatherings, standard dining height for chair compatibility | |
|---|---|---|
| Open-plan kitchen dining area | Light natural finish complements modern minimalist and Nordic interior schemes | |
| Small office breakout space | Durable solid wood surface suitable for casual meetings and employee meal areas | |
| Cafe or casual restaurant seating | Stable 6-leg structure supports frequent daily commercial use | |
| Studio apartment dining zone | Clean straight lines create visual lightness without excessive visual bulk |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable load and stability requirements | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface finishes, resistance to cold liquids and heat for dining surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structuralAcceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional and structuralAcceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
