Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1000 × 1000 × 770 mm
Tabletop thickness	30 mm
Leg diameter	60 mm
Minimum knee clearance height under tabletop	660 mm
Leg spread at floor contact points	820 mm
Smooth rounded tabletop edge radius	15 mm
Leg contact pad diameter	30 mm
Center intersection point height from floor	380 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Evenly distributed static tabletop load capacity	159 kg
Recommended seating capacity	4 people
Net product weight	26 kg
Surface abrasion resistance cycles	800
Maximum single-point concentrated load	50 kg
Wood moisture content for production	12%
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop construction	Solid hardwood with walnut brown satin lacquer finish
Tripod legs construction	Solid hardwood cylindrical members, matching walnut brown finish
Leg surface finish	0.15mm thick nitrocellulose lacquer coating
Joint connectors	M8 steel hex bolts with locking washers
Floor protection pads	5mm thick non-slip felt pads at each leg foot
Edge treatment	Hand-sanded rounded bullnose edge with no sharp corners
Finish sheen level	30% satin sheen
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Floor level adjustment	5mm height adjustment per leg via rotating felt pads
Assembly type	Knock-down assembly with cross leg attachment to tabletop underside
Surface maintenance	Wipe clean with dry or slightly damp cloth, avoid direct heat and prolonged sunlight
Stability performance	Three-point splayed leg design eliminates wobble on even hard floors
Extendability	Fixed non-extendable tabletop with no built-in leaf mechanism
Weight distribution	Centered tripod base transfers load evenly to three floor contact points
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Number of shipping cartons	1
Shipping carton dimensions	1050 × 1050 × 120 mm
Gross shipping weight	29 kg
Packaging volume (CBM)	0.132
Required assembly time	30 minutes
20ft GP container loading quantity	204 units
Included hardware and documentation	Assembly bolts, Allen key, printed instruction manual, spare felt pads
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining nook use	Suitable for 4people in small apartments or compact kitchen dining areas
Casual home workspace use	Provides stable round surface for laptop work, craft activities or light office tasks
Small café or bistro seating use	Ideal for boutique casual dining venues seeking mid-century wood aesthetic
Recommended pairing	Pairs with armless dining chairs with 450mm seat height for ergonomic dining posture
Flooring suitability	Safe for use on hardwood, tile, laminate and short-pile carpeted floors

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic table safety requirement	EN 12521:2015 Furniture - Strength, durability and safety for domestic dining tables
Surface formaldehyde emission requirement	EN 13986:2004 Wood-based panels for use in construction - Characteristics

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Table stability and strength requirement	GB/T 3324General technical requirements for wooden furniture
Surface coating safety requirement	GB 18584Limit of harmful substances in wooden furniture
Furniture dimensional tolerance requirement	GB/T 2009Method for determination of moisture content of wood

Standardized tender description text

This product must meet the following technical requirements:
1. Table stability and strength requirement: GB/T 3324General technical requirements for wooden furniture;
2. Surface coating safety requirement: GB 18584Limit of harmful substances in wooden furniture;
3. Furniture dimensional tolerance requirement: GB/T 2009Method for determination of moisture content of wood;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RDT-WAL-XTP-1000

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RDT-WAL-XTP-1000

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RDT-WAL-XTP-1000Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Walnut Brown Solid Wood Round Dining Table with X-Shaped Tripod Base (model RDT-WAL-XTP-1000) is an unbranded public and residential furniture piece defined by warm, mid-century-inspired visual appeal. Its circular tabletop features a smooth, hand-sanded rounded bullnose edge free of sharp corners, finished in a 30% satin sheen walnut brown tone that complements the matching cylindrical tripod legs. The X-form tripod base intersects 380 mm above the floor, with legs splayed to an 820 mm spread at floor contact points, creating an open, uncluttered silhouette that avoids visual bulk while preserving clear knee space for seated users. Constructed entirely from solid hardwood, the table features a 30 mm thick tabletop coated in a 0.15mm nitrocellulose walnut brown lacquer, tested to withstand 800 surface abrasion cycles, with wood processed to a 12% moisture content for consistent structural performance. The 60 mm diameter cylindrical legs connect to the tabletop underside via M8 steel hex bolts with locking washers, and each foot is fitted with a 30 mm diameter, 5mm thick non-slip felt pad that allows 5mm of per-leg height adjustment. The fixed, non-extendable structure holds an evenly distributed static load of 159 kg, with a 50 kg maximum single-point concentrated load, and its three-point splayed leg design eliminates wobble on even hard floors, supporting stable use across activities. With a 1000 mm diameter and 770 mm overall height, it offers 660 mm of minimum under-table knee clearance, with a recommended seating capacity of 4 people. The surface cleans easily with a dry or slightly damp cloth, requiring only basic care to avoid direct heat and prolonged sun exposure. This table fits compact residential dining nooks and small apartment kitchen spaces, doubles as a stable surface for casual home work, craft projects or light office tasks, and suits boutique small cafés or bistros seeking a warm wood aesthetic. It pairs optimally with armless dining chairs with a 450 mm seat height for ergonomic posture, and is safe for use on hardwood, tile, laminate and short-pile carpeted floors. Procurement teams should note the knock-down assembly design requires 30 minutes of assembly time per unit, with all units shipped in a single carton for streamlined logistics, and a net product weight of 26 kg that simplifies placement and rearrangement.

Walnut Brown Solid Wood Round Dining Table with X-Shaped Tripod Base Specifications

Suppliers and stock