| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 900 x 800 x 420 mm | |
|---|---|---|
| Larger table dimensions | 800 mm diameter x 370 mm height | |
| Smaller table dimensions | 610 mm diameter x 420 mm height | |
| Tabletop thickness | 25 mm | |
| Tapered leg diameter (floor end) | 35 mm | |
| Tapered leg diameter (table attachment end) | 50 mm | |
| Leg length (larger table) | 345 mm | |
| Leg length (smaller table) | 395 mm | |
| Leg splay angle | 12 degrees outward from vertical | |
| Under-table nesting clearance (larger table) | 335 mm | |
| Edge stitched trim width | 8 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Per-table static load capacity | 35 kg | |
|---|---|---|
| Set net weight | 28 kg | |
| Floor protection load rating per foot pad | 10 kg per pad | |
| Surface scratch resistance | 200 cycles | |
| Joint static load durability | 5000 use cycles | |
| Recommended maximum number of users | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Larger tabletop substrate | MDF core with walnut wood veneer finish | |
|---|---|---|
| Smaller tabletop substrate | MDF core with walnut wood veneer finish | |
| Table legs | Solid rubberwood with walnut brown stain and clear lacquer | |
| Perimeter edge trim | Stitched faux leather edge binding | |
| Foot pads | Non-slip polyethylene felt pads | |
| Leg mounting hardware | Zinc-plated steel hanger bolts and threaded inserts | |
| Surface finish coating | Tinted clear nitrocellulose lacquer | |
| Hardware pack components | Steel screws, dowel pins, assembly instruction manual | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Smaller table slides 70% under larger table | |
|---|---|---|
| Independent table use | Both tables can be separated and used as standalone surfaces | |
| Stable non-wobble support | 4-point splayed leg base per table distributes weight evenly | |
| Surface care functionality | Smooth lacquered surface wipes clean with dry or damp cloth | |
| Floor protection function | Felt foot pads glide without scratching hardwood, tile, or rug surfaces | |
| Simple assembly requirement | Legs attach to pre-drilled underside mounts with included hardware | |
| Decorative edge function | Stitched perimeter trim adds textured mid-century decorative detail | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Central placement in front of 4seat sofas for drinks, decor and serving | |
|---|---|---|
| Small apartment space use | Nesting configuration reduces footprint when extra surface is not needed | |
| Studio and lounge use | Separate tables can be pulled out for additional guest surface space during gatherings | |
| Matching style coordination | Pairs with mid-century modern, Scandinavian, and rustic walnut wood furniture | |
| Hard surface floor installation | Suitable for hardwood, tile, and low-pile rug installations | |
| Light decor load use | Designed for lightweight everyday items including trays, candles, books and beverage ware |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
