| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 800 x 750 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static tabletop load capacity | 150 kg | |
|---|---|---|
| Recommended seating capacity | 6 people | |
| Net product weight | 48 kg | |
| Frame joint static load rating | 100 kg per leg | |
| Surface abrasion resistance | 10000 rub cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Natural oak veneer or solid pine with clear matte lacquer finish | |
|---|---|---|
| Leg frame | 1.5mm thick square steel tube with matte black powder coating | |
| Longitudinal cross support | 40x40mm square steel welded to leg units for torsional stability | |
| Tabletop edge | Straight square edge with lightly sanded rounded corner treatment | |
| Frame to tabletop fasteners | M8 steel carriage bolts with pre-installed threaded inserts in tabletop underside | |
| Floor contact pads | 3mm thick non-slip PE pads at each leg base | |
| Surface coating on wood | Low-VOC clear nitrocellulose lacquer, 3 coat application | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly, attaches two leg sets to tabletop with included hardware | |
|---|---|---|
| Floor protection | Non-marring pads prevent scratching hard flooring surfaces without additional glides | |
| Seating accessibility | Open trestle design allows 2 seats on each long side and 1 seat on each short end | |
| Stability reinforcement | Welded cross support reduces frame wobble on uneven floors up to 3mm variation | |
| Surface maintenance | Smooth sealed finish allows wipe cleaning with mild household cleaners without water damage | |
| Weight distribution | Trestle leg layout distributes load evenly across 4 floor contact points | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Serves 6 people for daily family meals and casual gatherings, fits standard dining spaces | |
|---|---|---|
| Open plan kitchen dining area | Minimal industrial style coordinates with modern, rustic or loft kitchen designs | |
| Small office break room | Provides stable work and dining surface for employee meal breaks and casual meetings | |
| Cafe or bistro seating | Durable easy-clean surface works for high-traffic casual food service environments |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture, strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating and tables stability test method |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop structural strength | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable if engineered wood substrate is used | |
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop structural strength; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable if engineered wood substrate is used; 3. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
