Product supplierMinimalist Rectangular Matte White Coffee Table with Splayed Light Wood Legs, 16mm MDF engineered wood
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1200 × 610 × 460 mm | |
|---|---|---|
| tabletop thickness | 16 mm | |
| corner radius | 30 mm | |
| leg top cross-section diameter | 45 mm | |
| leg bottom cross-section diameter | 30 mm | |
| leg splay angle from vertical | 12 degrees | |
| under-table ground clearance | 340 mm | |
| apron height below tabletop | 104 mm | |
| leg spread along table length | 1080 mm | |
| leg spread along table width | 520 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| tabletop distributed static load | 50 kg | |
|---|---|---|
| tabletop point static load | 20 kg | |
| net product weight | 31 kg | |
| surface abrasion resistance | 2000 cycles | |
| leg joint static shear strength | 80 kg per leg | |
| warranty period | 12 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| tabletop substrate | 16mm MDF engineered wood | |
|---|---|---|
| tabletop surface finish | Matte white polyurethane paint | |
| support apron | Solid rubberwood rail | |
| support legs | Solid white oak/rubberwood tapered legs | |
| leg mounting hardware | Zinc-plated steel bolt inserts | |
| floor protection pads | 5mm thick felt pads | |
| finish coating thickness | 0.15 mm | |
| wood moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| assembly requirement | Knock-down leg attachment with included hex key | |
|---|---|---|
| surface function | Smooth non-porous top for holding drinks, decor and reading materials | |
| under-table access | Open unobstructed underframe with no shelves or drawers | |
| leg stability design | Outward-splayed four-leg configuration | |
| floor protection | Felt glides on all leg bases | |
| color offering | Matte white top with natural light wood legs | |
| edge safety design | Softly rounded tabletop edges and corners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| living room center placement | Positioned in front of sofas for holding beverages, decor and reading materials | |
|---|---|---|
| small apartment seating areas | Compact footprint suitable for studio and open-plan small living spaces | |
| Scandinavian interior schemes | Light wood and matte white finish complements Nordic, minimalist and modern decor styles | |
| office reception lounge use | Suitable for guest waiting areas in modern corporate offices, paired with low lounge seating | |
| residential rental furnishing | Durable easy-clean finish and simple assembly suit furnished apartment and short-term rental properties | |
| light commercial lounge use | Appropriate for cafe lounge zones and co-working breakout spaces with casual seating |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable performance benchmark | |
|---|---|---|
| EN 71-3:2019+A1:2021 | Safety of furniture surface coating migration for household use environments |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for flatness and stability checks | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of formaldehyde emission for wooden furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for flatness and stability checks; 2. GB 18584-2001: Indoor decoration material limit of formaldehyde emission for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool