| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 1000 x 760 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Under-table knee clearance height | 730 mm | |
| Pedestal base footprint | 450 x 450 mm | |
| Pedestal base height | 720 mm | |
| Dark metal edge trim width | 20 mm | |
| Metal support bracket height at base joint | 150 mm | |
| Clear span between two pedestal bases | 1200 mm | |
| Tabletop corner radius | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total product net weight | 77 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 150 kg | |
| Recommended seating capacity | 8 persons | |
| Sintered stone surface heat resistance | 180 °C | |
| Surface abrasion resistance | 6000 cycles | |
| Leveling foot adjustment range | 10 mm | |
| Structural warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface material | 12mm thick polished sintered stone, white marble pattern with gray veining | |
|---|---|---|
| Tabletop backing structure | 18mm thick high-density particleboard reinforcement under stone layer | |
| Tabletop edge trim | 1.2mm thick matte black powder-coated carbon steel strip | |
| Pedestal base outer shell | Beige matte painted high-density MDF formed into tapered trapezoid | |
| Pedestal internal frame | 1.5mm thick square carbon steel tube frame inside each pedestal | |
| Base-to-tabletop connectors | Matte black powder-coated 3mm thick steel L-brackets | |
| Pedestal bottom feet | TPU non-slip adjustable leveling glides | |
| Base surface finish | Scratch-resistant matte PU paint, 0.15mm dry film thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Fixed non-extendable structure | Permanent 2200mm length with no built-in extension mechanism | |
|---|---|---|
| Leveling adjustment | Rotating TPU feet at each pedestal base to correct up to 10mm floor unevenness | |
| Food-safe surface | Non-porous sintered stone top suitable for direct contact with food and hot serveware | |
| Easy cleaning surface | Stain-resistant polished stone finish wiped clean with damp cloth, no sealant required | |
| Stable multi-side seating | Offset end-placed pedestals eliminate center leg obstruction for 360° seating access | |
| Floor protection | Soft TPU glides prevent scratches on hard flooring and low-pile rugs | |
| Static weight distribution | Dual wide pedestal bases spread table load evenly to prevent surface indentation | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room use | Fits 8-seater dining spaces for family meals and small home gatherings | |
|---|---|---|
| Open-plan living/dining spaces | Light luxury aesthetic complements modern and contemporary interior decor | |
| Home tea room application | Wide flat surface accommodates full tea service setups as shown in product image | |
| Small boutique meeting space | Suitable for casual client meetings in studio or small office environments | |
| Recommended pairing | Matches upholstered armless dining chairs with light beige or neutral upholstery | |
| Floor surface compatibility | Safe for use on hardwood, tile, laminate and low-pile area rugs |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface finish resistance to wear and heat |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base structural performance | |
|---|---|---|
| GB 18584-2001 | Limits of harmful substances for wooden furniture, applicable to base finish emissions | |
| GB/T 4897.3-2016 | Particleboard requirements for furniture structural use, applicable to top backing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base structural performance; 2. GB 18584-2001: Limits of harmful substances for wooden furniture, applicable to base finish emissions; 3. GB/T 4897.3-2016: Particleboard requirements for furniture structural use, applicable to top backing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
