Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	620 × 680 × 1010 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight	17 kg
Recommended user weight capacity	160 kg
Single-user seating capacity	1 person
Seat static load verification target	160 kg held for 1 hour
Backrest backward force target	90 kgf
Arm downward static load target	68 kg per arm
Cantilever cyclic durability target	100,000 seating cycles
Cushion indentation recovery target	90% after 24 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Beige leather-look upholstery over padded cushion, with horizontal seam visible on back
Back upholstery	Beige padded upholstered panel with one horizontal dividing seam and stitched perimeter
Seat foam	80 mm molded polyurethane cushion foam, density target 38 kg/m3
Back foam	60 mm polyurethane padding, density target 30 kg/m3
Internal seat carrier	12 mm molded plywood or engineered-composite seat board under cushion
Internal back carrier	8 mm molded plywood or polymer back board supporting upholstered panel
Side trim panels	Dark molded polymer or hard-finished composite panels on arm and back sides
Arm pads	Beige upholstered padding continuous with integrated arm loops
Cantilever frame	Polished chrome-plated steel tube, 25 mm diameter, continuous sled construction
Floor contact pads	Injected polymer glides fitted to each runner end, 4 contact points
Upholstery seam details	Stitched seam construction with 8 mm target stitch pitch
Fasteners and brackets	Powder-coated or zinc-plated steel seat-to-frame brackets with concealed bolts

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed cantilever movement	Continuous steel sled frame provides controlled flex without swivel, tilt, or caster movement
Visitor seating posture	450 mm seat height and 480 mm seat depth support upright meeting-room posture
Integrated arm support	Loop-style arms transfer from back to seat frame and provide 230 mm forearm support height
Floor protection	Four polymer end glides allow controlled sliding while reducing floor scratching
Stacking capability	Non-stacking fixed frame; chairs should be stored individually rather than nested
Reclining adjustment	Fixed recline angle of 100 degrees between seat and back, with no user tilt control
Swivel function	No swivel mechanism; the seat is fixed to the cantilever support frame
Height adjustment	No height adjustment; fixed seat height provides consistent visitor and conference seating
Cleaning access	300 mm under-seat clearance permits vacuuming and floor cleaning around the sled runners
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive visitor seating	Place across from a desk for short-to-medium meetings at 450 mm fixed seat height
Conference room use	Use around boardroom tables where a uniform non-swivel chair creates a formal seating layout
Reception and waiting areas	Suitable for corporate reception zones due to padded seat, supportive back, and easy-to-clean upholstery
Management office meeting corner	Pair two or more chairs with a low meeting table or executive desk return
Commercial project specification	Suitable for projects requiring repeated identical conference chairs with chrome frames and upholstered pads
Floor compatibility	Use on hard floors with fitted glides; add felt glides for polished wood or sensitive tile
Occupant profile	Designed for adult office users up to 160 kg in short-duration visitor and meeting applications
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 16139:2013 Level 2	Use strength, durability, and safety requirements for non-domestic seating
EN 1022:2018	Use seating stability test method for forward, rearward, and lateral tipping checks
EN 12520:2015	Use mechanical safety requirements for household and contract seating where applicable

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1 General Purpose Office Chairs	Use static load, fatigue, stability, and structural test procedures for commercial seating
ANSI/BIFMA e3 furniture sustainability	Request upholstery, foam, metal finishing, and chemical-content disclosure during sourcing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 10357.2 furniture mechanical test	Apply chair back and seat static-load test methods for procurement verification
GB/T 10357.3 furniture durability test	Apply chair seat and back fatigue/durability test method to fixed guest chair
GB/T 24430.1 contract furniture seating	Use contract-seating safety and dimensional requirements as acceptance guidance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 10357.2 furniture mechanical test: Apply chair back and seat static-load test methods for procurement verification;
2. GB/T 10357.3 furniture durability test: Apply chair seat and back fatigue/durability test method to fixed guest chair;
3. GB/T 24430.1 contract furniture seating: Use contract-seating safety and dimensional requirements as acceptance guidance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CR-MB-BGE-CANT-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CR-MB-BGE-CANT-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CR-MB-BGE-CANT-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Mid-Back Upholstered Executive Guest Chair, model CR-MB-BGE-CANT-01, is a fixed-position office guest and conference chair with a polished chrome cantilever frame and beige leather-look upholstery. Its upright, tailored form is defined by a padded mid-height back with one horizontal dividing seam and a stitched perimeter, dark molded side trim, and continuous loop-style arm pads that flow from the back toward the seat. The chair measures 620 by 680 by 1010 mm overall, with a 540 mm clear width between armrests, giving it a structured executive appearance suited to orderly meeting and reception layouts. Construction balances cushioned comfort with a rigid support system. The seat combines beige upholstery with a 90 mm finished cushion, 80 mm molded polyurethane foam at a density target of 38 kg/m3, and a 12 mm molded plywood or engineered-composite carrier. The backrest uses 70 mm padding over a 60 mm polyurethane layer with a density target of 30 kg/m3, supported by an 8 mm molded plywood or polymer board. A 240 mm lumbar support zone adds shaped back support. Dark polymer or hard-finished composite panels trim the arm and back sides, while the base is a continuous polished chrome-plated steel tube sled frame, 25 mm in diameter, with integrated beige upholstered arm pads and four polymer end glides. Designed for controlled flexibility rather than motion adjustment, the cantilever frame flexes under seating load but does not swivel, tilt, or roll. The fixed 100-degree seat-to-back angle, 450 mm seat height, 480 mm seat depth, and 230 mm forearm support height promote an upright visitor posture. The chair seats one person, has a net weight of 17 kg, and carries a recommended user weight capacity of 160 kg. Verification targets include holding a 160 kg static seat load for one hour, withstanding 90 kgf backward force on the backrest, supporting 68 kg downward static load per arm, and completing 100,000 cantilever seating cycles. It is non-stacking and should be stored individually. This chair is appropriate across from an executive desk for short-to-medium meetings, around boardroom tables for a uniform formal arrangement, in corporate reception and waiting areas, and in management office meeting corners paired with a low table or desk return. Its easy-to-clean beige upholstery and repeated identical design also make it suitable for commercial project specifications. The supplied glides are intended for hard floors; felt glides should be added for polished wood or sensitive tile. Procurement planning should note that each set is unbranded, ships in two cartons, and has a packaged gross weight of 23 kg and carton volume of 0.26 m3. Reference carton dimensions are 850 by 420 by 720 mm, assembly time is 40 minutes per set, and an indicative 20GP container loads 135 sets at 85 percent space utilization.

Mid-Back Upholstered Executive Guest Chair with Chrome Cantilever Base Specifications

Suppliers and stock