Product supplierBlack High-Back Executive Visitor Chair with Polished Cantilever Base, Black leather-look upholstered surface with visible horizontal creasing
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 780 × 1090 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 18 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Recommended daily user size | Up to 1850 mm tall and 100 kg body weight | |
| Back static load acceptance reference | 160 kg | |
| Seat impact durability reference | 100,000 cycles | |
| Floor glide sliding durability | 50,000 cycles | |
| Frame deflection under 160 kg static load | 10 mm maximum | |
| Color count | 1 | |
| Warranty period | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Black leather-look upholstered surface with visible horizontal creasing | |
|---|---|---|
| Back upholstery | Black padded upholstered panel with integrated rolled head section | |
| Seat cushion core | Molded polyurethane foam, 90 mm thick at front roll | |
| Back cushion core | Shaped polyurethane padding, 70 mm maximum thickness | |
| Cantilever frame | Polished chrome-plated steel tube, 32 mm diameter | |
| Arm supports | Continuous chrome-finish steel loop connected to seat and back frame | |
| Arm pads | Black padded upholstered pads following the curved steel supports | |
| Internal back support | 12 mm molded board or bent plywood carrier with steel fixing plates | |
| Seat support board | 12 mm load-distributing board over the steel seat cradle | |
| Floor glides | Black injection-molded polymer glides at four ground-contact points | |
| Edge tailoring | Sewn rolled-edge upholstery with 8 mm seam pitch as a procurement target | |
| Fasteners | Steel bolts and locking nuts at arm, back, and seat-frame joints |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed seating action | Cantilever base provides controlled vertical flex without swivel, tilt, or caster movement | |
|---|---|---|
| Height adjustment | No gas lift or height adjustment; fixed 450 mm seat height | |
| Back support | Two-zone padded back combines lumbar panel and rolled upper shoulder support | |
| Arm support | Curved continuous-loop arms provide fixed forearm support at 680 mm floor height | |
| Floor protection | Four polymer glides distribute load and reduce marking on hard floors | |
| Stacking capability | Non-stacking high-back executive chair | |
| Assembly requirement | Back and arms align to the cantilever cradle with bolted steel connection plates | |
| Replaceable wear parts | Glides and arm pads should be removable for replacement without replacing the frame | |
| Recommended daily use duration | 8 hours per user in executive conference applications | |
| Safety use limit | Not designed as a stool, recliner, or multi-person bench | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive conference room | Use around boardroom tables where a fixed 450 mm seat and high-back support suit long meetings | |
|---|---|---|
| Reception or visitor area | Place in front of executive desks or in visitor zones where rolling chairs are unnecessary | |
| Management office | Pair with an executive desk for temporary guest seating without matching the task chair mechanism | |
| Meeting suites | Specify in uniform sets of 4 to 20 chairs around fixed conference tables | |
| Hard-floor office environments | Recommended for tile, wood, laminate, and sealed concrete floors using polymer glides | |
| Commercial interiors with restrained styling | Suitable for black, gray, or monochrome palettes and polished-metal accents | |
| Not recommended for adjustable workstation tasks | Use as a visitor chair rather than an ergonomic task chair because it lacks height, tilt, and swivel controls | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139 office seating | Use strength, durability, and safety requirements for non-domestic visitor and conference chairs | |
|---|---|---|
| EN 1022 stability | Verify front, rear, and side stability of the fixed cantilever chair on level floors | |
| EN 12520 seating safety | Use general mechanical safety requirements for strength and stability verification |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 general-purpose office chairs | Use back, seat, leg-strength, and stability tests as an enhanced procurement benchmark | |
|---|---|---|
| ANSI/BIFMA X5.4 lounge and public seating | Consider public-seating load and durability tests for high-traffic reception use |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2 furniture mechanical test | Apply chair back-strength and durability test methods for fixed office seating | |
|---|---|---|
| GB/T 10357.3 furniture mechanical test | Apply chair seat strength and impact durability methods to seat and cantilever frame | |
| GB 18584 indoor furniture limit | Use for formaldehyde and hazardous-substance screening if wood-based panels are present |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture mechanical test: Apply chair back-strength and durability test methods for fixed office seating; 2. GB/T 10357.3 furniture mechanical test: Apply chair seat strength and impact durability methods to seat and cantilever frame; 3. GB 18584 indoor furniture limit: Use for formaldehyde and hazardous-substance screening if wood-based panels are present; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool