Product supplierTan Upholstered Cantilever Conference Armchair, Tan leather-look upholstered surface over sewn perimeter border
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 620 × 650 × 920 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight | 160 kg | |
|---|---|---|
| Net weight | 16 kg | |
| Static seat proof load reference | 320 kg | |
| Backrest horizontal load reference | 100 kg | |
| Armrest downward load reference | 80 kg per arm | |
| Daily seating capacity | 1 user | |
| Foam density | 45 kg/m3 seat, 40 kg/m3 back | |
| Foam rebound | 40% | |
| Expected service life | 8 years | |
| Warranty target | 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Tan leather-look upholstered surface over sewn perimeter border | |
|---|---|---|
| Backrest upholstery | Tan padded rectangular back panel with framed edge piping | |
| Seat cushion | Molded polyurethane foam pad with 80 mm crown thickness | |
| Back cushion | Layered polyurethane padding at 70 mm thickness with resilient front face | |
| Seat support panel | 12 mm molded composite or bent plywood load board under the cushion | |
| Armrest pads | Tan upholstered pads over rigid arm cores with 35 mm soft thickness | |
| Arm supports | Polished chrome-plated steel brackets connecting pads to seat frame | |
| Cantilever frame | 25 mm chrome-plated steel tube with continuous twin-sled geometry | |
| Floor glides | 40 mm non-marking polymer end caps bonded into tube feet | |
| Underside plate | Black powder-coated steel or rigid polymer anti-impact plate beneath the seat | |
| Frame joint construction | Welded tubular junctions with concealed fasteners at arm and seat mounts | |
| Seam construction | Single-needle perimeter seam with 8 stitches per 100 mm |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Cantilever movement | Flexible sled-base give of 15 mm under seated load | |
|---|---|---|
| Seat tilt | Fixed horizontal seat with no recline mechanism | |
| Back support | Upright padded back at a 98-degree seated angle | |
| Arm support | Fixed upholstered armrests at 680 mm above floor level | |
| Mobility | Non-swiveling sled base with sliding polymer glides | |
| Floor protection | Four polymer contact ends distribute the frame load | |
| Stacking | Non-stacking single chair design | |
| Nesting | No row-link or fold-up seat mechanism | |
| Cleaning access | Smooth upholstered faces and open sled base allow wiping and floor access | |
| Orientation | Front-facing chair with fixed back angle | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Conference room | Place around 760 mm high boardroom tables for 450 mm seat-to-desk compatibility | |
|---|---|---|
| Executive office | Use as a visitor chair facing a desk or alongside a lounge zone | |
| Reception area | Pair two or four chairs with low tables in corporate reception spaces | |
| Training room | Specify in rows for formal training where rolling chairs are unnecessary | |
| Manager meeting space | Use for one-to-one discussions and short interviews | |
| Hard-floor office | Recommended for timber, tile, marble, or sealed concrete floors with polymer glides | |
| Conservative interior palette | Coordinate with walnut, black, white, grey, or charcoal desk systems | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 16139 non-domestic seating | Use strength, durability, and safety requirements for contract seating | |
|---|---|---|
| EN 1022 seating stability | Verify forward, rearward, and side stability on level test surfaces | |
| EN 12520 seating safety | Check sharp edges, pinch points, and structural safety for seating |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 General-Purpose Office Chairs | Use back, seat, arm, stability, and cyclic load clauses for commercial seating |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 seating strength | Apply back, seat, and arm static-load tests for metal office seating | |
|---|---|---|
| GB/T 10357.6 furniture durability | Use cyclic seating and back-rest durability procedures for commercial chairs | |
| GB 18584 indoor furniture limits | Require interior-furniture hazardous-substance limits for substrate and trim | |
| GB/T 28202 hardware basis | Use furniture hardware terminology and inspection requirements for bolts and glides |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 seating strength: Apply back, seat, and arm static-load tests for metal office seating; 2. GB/T 10357.6 furniture durability: Use cyclic seating and back-rest durability procedures for commercial chairs; 3. GB 18584 indoor furniture limits: Require interior-furniture hazardous-substance limits for substrate and trim; 4. GB/T 28202 hardware basis: Use furniture hardware terminology and inspection requirements for bolts and glides; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool