Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	610 × 650 × 1000 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended user weight capacity	140 kg
net weight	14 kg
Seating capacity	1 person
Backrest static load target	140 kg
Arm downward static load target	45 kg per arm
Sled frame flex cycles	100,000 cycles
Seat foam density	38 kg/m3
Back foam density	32 kg/m3
Fabric or leather abrasion target	50,000 Martindale cycles
Suggested warranty	5 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat upholstery	Tan leather or leather-look upholstery over padded foam; exact hide or PU grade requires supplier BOM confirmation.
Back upholstery	Tan upholstered padded back panel with smooth outer face and stitched perimeter; material grade is not visible.
Seat cushion core	Molded polyurethane foam, 90 mm thick, specified at 38 kg/m3 for office visitor use.
Back cushion core	Shaped polyurethane padding, 70 mm thick, specified at 32 kg/m3 for lumbar and back support.
Internal support board	12 mm molded plywood or engineered composite seat shell, selected for fixed upholstered chair construction.
Cantilever base	Polished chrome-plated steel tube, 25 mm diameter, forming continuous sled legs and rear support structure.
Arm supports	Curved chrome-plated steel arms connected to the seat frame, with upholstered upper pads following the chair side profile.
Floor glides	Injection-molded polymer or nylon glides at four floor-contact points to reduce noise and floor marking.
Metal finish	Mirror-polished chrome plating with corrosion-protected undercoat; actual plating thickness requires supplier test report.
Upholstery seam	Stitched perimeter construction with 8 stitches per 100 mm target for consistent edge finishing.
Color count	1 visible upholstery color, tan, with polished chrome frame finish.
Edge treatment	Rounded padded front edge and close-fitted upholstery cover visible from chair profile.

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Fixed cantilever movement	Sled frame provides controlled vertical flex without tilt, swivel, or height adjustment.
Guest seating function	Fixed 450 mm seat height supports visitors at standard meeting and executive desks.
Arm support function	Integrated loop arms provide continuous side and elbow support with no height adjustment.
Back posture support	Tall contoured back extends to upper-back height and maintains a fixed upright angle of 100 degrees.
Floor protection	Four polymer glides slide on hard floors and eliminate caster-related movement during meetings.
Entry and exit clearance	Open front sled design provides 260 mm under-seat clearance and unobstructed side access.
Stacking limitation	Fixed curved cantilever base is specified as non-stacking unless supplier documents a stacking version.
Noise control	Polymer glides and continuous steel frame target quiet use in conference and executive rooms.
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive office visitor area	Fixed guest seating pairs with desks while maintaining a formal appearance for clients and managers.
Meeting or boardroom seating around tables	450 mm seat height suits standard 760 mm conference tables.
Reception lounge	Tan upholstery and chrome frame provide a professional look for formal reception settings.
Private manager office	Two chairs can be placed opposite an executive desk for short and medium-duration discussions.
Hard-floor commercial interiors	Polymer glides are intended for tile, wood, laminate, and low-pivot carpet applications.
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Office chair structural testing suitability	EN 16139
Upholstered furniture flammability suitability	EN 1021and EN 1021
Formaldehyde and panel emissions suitability	EN 717

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

Commercial seating structural suitability	ANSI/BIFMA X5.4
Upholstery performance suitability	ANSI/BIFMA e3 section 7.5

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Office chair strength and durability suitability	GB/T 10357.2
Furniture surface coating suitability	GB/T 4893.4

Standardized tender description text

This product must meet the following technical requirements:
1. Office chair strength and durability suitability: GB/T 10357.2;
2. Furniture surface coating suitability: GB/T 4893.4;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · EXEC-VST-CAM-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · EXEC-VST-CAM-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · EXEC-VST-CAM-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Executive Leather Visitor Chair with Chrome Cantilever Sled Base is a formal single-seat guest chair designed for executive, meeting, and reception settings. It presents a tall, contoured upholstered back, a generously padded tan seat, and a continuous polished chrome frame that creates a clean, structured silhouette. Curved integrated arm supports follow the side profile of the chair and connect into the seat frame, giving the design a streamlined appearance while providing elbow and side support. The open front sled layout keeps the area beneath the seat clear and offers unobstructed side access for users entering or leaving the seat. Its construction combines tan leather or leather-look upholstery with padded foam and a chrome-plated steel cantilever frame made from 25 mm diameter steel tube. The seat uses a 90 mm molded polyurethane foam cushion specified at 38 kg/m3, while the backrest uses 70 mm shaped polyurethane padding specified at 32 kg/m3 and includes a 240 mm lumbar support zone. Beneath the upholstery is a 12 mm molded plywood or engineered composite seat shell. The back panel has a smooth outer face with a stitched perimeter, and the armrests include upholstered upper pads for comfort. A mirror-polished chrome finish with a corrosion-protected undercoat gives the frame a bright professional appearance; exact hide or PU grade and plating thickness should be confirmed with supplier documentation. The chair uses fixed cantilever movement, producing controlled vertical flex through the sled frame without tilt, swivel, or height adjustment. The fixed 450 mm seat height is intended for visitors at standard meeting and executive desks. The backrest holds a fixed upright angle of 100 degrees and extends to upper-back height. Four injection-molded polymer or nylon glides reduce noise and floor marking, making the chair suitable for tile, wood, laminate, and low-pivot carpet environments while preventing caster-style movement during meetings. The stated recommended user weight capacity is 140 kg, with separate static load targets for the backrest and arms. The chair is non-stacking unless the supplier specifically documents a stacking version. This model suits executive office visitor areas, boardrooms and meeting rooms, formal reception lounges, and private manager offices. It can be placed across from a 2.4 m executive desk or arranged around standard 760 mm conference tables. Its tan upholstery and chrome frame deliver a polished look for client-facing discussions and short to medium-duration meetings. Procurement teams should confirm the precise upholstery type, material grade, and chrome test report before purchase. The product is unbranded, model EXEC-VST-CAM-01, and supplied as one set in two cartons, with a reference assembly time of 40 minutes per set. The package has a reference gross weight of 23 kg and carton volume of 0.26 cubic meters, supporting logistics planning for multi-chair projects.

Executive Leather Visitor Chair with Chrome Cantilever Sled Base Specifications

Suppliers and stock