Black Padded Cantilever Conference Chair with Chrome Sled Frame and Fixed Armrests (model CF-CH-BLK-SLED-01) is listed under Bow Chair. Dimensions: 610 × 650 × 1010 mm. Materials: Black smooth upholstery over padded cushion, likely leather-look PU or genuine leather option. Load capacity: 640 kg. Product Features: black,upholstery,cantilever,sled,base,fixed,armrests,chair,minimalist,design. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JIULONGYOUSHENG | Model | CF-CH-BLK-SLED-01 |
| Overall dimensions (W × D × H) | 610 × 650 × 1010 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Net weight | 13.5 kg |
| Recommended user weight capacity | 160 kg | Suggested daily occupancy | 8 hours |
| Frame static verification load | 640 kg | Seat impact durability | 100,000 cycles |
| Backrest backward load | 136 kg | Arm downward load | 90 kg per arm |
| Tip resistance rearward | 12 degrees | Glide floor load | 25 kg per glide |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Seat upholstery | Black smooth upholstery over padded cushion, likely leather-look PU or genuine leather option |
| Back upholstery | Black padded upholstered panel with subtly rounded top corners and clean perimeter stitching | Seat cushion core | Molded polyurethane foam at 80 mm thickness, recommended density 45 kg/m3 |
| Back cushion core | Shaped polyurethane foam at 50 mm effective thickness, recommended density 35 kg/m3 | Internal seat support | 12 mm molded hardwood-composite board or steel-reinforced plywood seat carrier |
| Internal back carrier | 8 mm molded board or bent plywood panel attached to the steel frame | Frame | One-piece polished chrome-plated mild-steel cantilever tube, 25 mm diameter and 1.8 mm wall thickness |
| Armrests | Continuous chrome tubular supports with padded or wrapped horizontal black arm surfaces | Floor glides | Four non-marking polymer or nylon glide inserts at the sled rail ends |
| Surface finish | Bright polished chrome plating with multi-layer nickel undercoat recommended | Seam construction | Single perimeter upholstery seam with 7 stitches per 50 mm recommended |
| Frame fasteners | M8 steel mounting bolts or riveted hinges between back/seat carrier and frame | Fixed cantilever suspension | Continuous sled frame flexes slightly under load without tilt mechanism or gas lift |
| Fixed arm support | Integrated tubular armrests provide forearm support at 680 mm floor height and do not adjust | Static upright seating | Tall padded back supports upright posture for meetings, with no recline lock or headrest |
| Floor protection | Four polymer end glides allow short repositioning while reducing floor scratching | Stacking capability | Non-stacking single chair, as the fixed back and arm frame would obstruct nesting |
| Movement | Non-swivel fixed-position chair requiring the occupant to reposition the whole chair | Assembly method | Frame-mounted back and seat likely ship partly assembled; glides insert into four rail ends |
| Maintenance access | Upholstery can be wiped clean; frame fasteners should be checked after the first 30 days of commercial use | Recline Angle / Lock Reference | 125° with 3suggested lock positions |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | Height Adjustment Stroke | 100 mm continuous travel |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Carton Dimensions | 850× 420× 720 mm |
| Reference Packaged Gross Weight | 23 kg/set | Reference Carton Volume | 0.26 m³/set |
| Indicative 20GP Loading | 135 sets at 85% space utilization | Indicative 40HQ Loading | 320 sets at 85% space utilization |
| Conference rooms | Use around 750 mm high meeting tables where fixed quiet seating and a uniform executive look are required | Executive reception | Place in pairs in reception or visitor areas with desks, sofas, or low tables |
| Training discussion rooms | Suitable for short-to-medium-duration sessions with frequent user changes | Manager office visitor side | Position one or two chairs in front of an executive desk for guests |
| Commercial project furnishing | Suitable for bulk procurement where identical black frames and replacement consistency are needed | Hard-floor spaces | Use on tile, wood, or sealed floors with the four non-marking glides |
| Recommended Matching Desk Size | 2.4 m executive desk | Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 610 × 650 × 1010 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 13.5 kg | |
|---|---|---|
| Recommended user weight capacity | 160 kg | |
| Suggested daily occupancy | 8 hours | |
| Frame static verification load | 640 kg | |
| Seat impact durability | 100,000 cycles | |
| Backrest backward load | 136 kg | |
| Arm downward load | 90 kg per arm | |
| Tip resistance rearward | 12 degrees | |
| Glide floor load | 25 kg per glide | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat upholstery | Black smooth upholstery over padded cushion, likely leather-look PU or genuine leather option | |
|---|---|---|
| Back upholstery | Black padded upholstered panel with subtly rounded top corners and clean perimeter stitching | |
| Seat cushion core | Molded polyurethane foam at 80 mm thickness, recommended density 45 kg/m3 | |
| Back cushion core | Shaped polyurethane foam at 50 mm effective thickness, recommended density 35 kg/m3 | |
| Internal seat support | 12 mm molded hardwood-composite board or steel-reinforced plywood seat carrier | |
| Internal back carrier | 8 mm molded board or bent plywood panel attached to the steel frame | |
| Frame | One-piece polished chrome-plated mild-steel cantilever tube, 25 mm diameter and 1.8 mm wall thickness | |
| Armrests | Continuous chrome tubular supports with padded or wrapped horizontal black arm surfaces | |
| Floor glides | Four non-marking polymer or nylon glide inserts at the sled rail ends | |
| Surface finish | Bright polished chrome plating with multi-layer nickel undercoat recommended | |
| Seam construction | Single perimeter upholstery seam with 7 stitches per 50 mm recommended | |
| Frame fasteners | M8 steel mounting bolts or riveted hinges between back/seat carrier and frame |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed cantilever suspension | Continuous sled frame flexes slightly under load without tilt mechanism or gas lift | |
|---|---|---|
| Fixed arm support | Integrated tubular armrests provide forearm support at 680 mm floor height and do not adjust | |
| Static upright seating | Tall padded back supports upright posture for meetings, with no recline lock or headrest | |
| Floor protection | Four polymer end glides allow short repositioning while reducing floor scratching | |
| Stacking capability | Non-stacking single chair, as the fixed back and arm frame would obstruct nesting | |
| Movement | Non-swivel fixed-position chair requiring the occupant to reposition the whole chair | |
| Assembly method | Frame-mounted back and seat likely ship partly assembled; glides insert into four rail ends | |
| Maintenance access | Upholstery can be wiped clean; frame fasteners should be checked after the first 30 days of commercial use | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Conference rooms | Use around 750 mm high meeting tables where fixed quiet seating and a uniform executive look are required | |
|---|---|---|
| Executive reception | Place in pairs in reception or visitor areas with desks, sofas, or low tables | |
| Training discussion rooms | Suitable for short-to-medium-duration sessions with frequent user changes | |
| Manager office visitor side | Position one or two chairs in front of an executive desk for guests | |
| Commercial project furnishing | Suitable for bulk procurement where identical black frames and replacement consistency are needed | |
| Hard-floor spaces | Use on tile, wood, or sealed floors with the four non-marking glides | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 16139 applicability | Use for strength, durability, and safety of non-domestic contract seating | |
|---|---|---|
| EN 1022 applicability | Use for stability testing of the fixed cantilever chair on a level test platform | |
| EN 12521 applicability | Use as the European furniture safety reference for non-domestic seating if specified |
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 durability applicability | Use 100,000-cycle seat impact and cyclic back-load testing |
|---|
Standards applicable to China-market projects
| GB/T 10357.2 applicability | Use for chair seat and back mechanical stability acceptance testing | |
|---|---|---|
| GB/T 10357.3 applicability | Use for chair strength and durability testing of seat, back, and arm loads | |
| GB 18584 applicability | Use for indoor-furniture hazardous-substance limits on wooden and upholstered components |
This product must meet the following technical requirements: 1. GB/T 10357.2 applicability: Use for chair seat and back mechanical stability acceptance testing; 2. GB/T 10357.3 applicability: Use for chair strength and durability testing of seat, back, and arm loads; 3. GB 18584 applicability: Use for indoor-furniture hazardous-substance limits on wooden and upholstered components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp