纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	740 × 760 × 790 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight capacity	140 kg
Seating capacity	1 person
Product net weight	16 kg
Back static load reference	180 kg
Seat impact durability reference	100,000 cycles
Leg stability verification	20 N horizontal stability force
Upholstery seam strength target	400 N
Cushion compression set reference	35 percent after 22 hours at 40 percent compression
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Upper back upholstery	Taupe smooth upholstery material over padded curved shell
Lower shell upholstery	Charcoal smooth upholstery covering front apron and lower arm panels
Seat cushion covering	Charcoal smooth upholstery with perimeter stitched seam
Seat cushion core	110 mm polyurethane foam pad, 35 kg/m3 density target
Back padding	20 mm polyurethane foam layer over shaped back board
Internal load-bearing shell	12 mm molded plywood or composite board with reinforcing blocks
Support legs	Four 25 mm diameter dark powder-coated steel tubes with splayed geometry
Floor contacts	Four polymer or felt glides pressed onto leg ends
Joint hardware	Steel mounting plates with M8 frame screws at each leg
Upper-to-lower panel joinery	Stitched horizontal seam separating taupe and charcoal upholstery zones
Seat cushion seam	Double-stitched front perimeter seam with 4 mm stitch pitch target
Back panel construction	One continuous padded panel wrapping into integrated arm caps

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Fixed single-person lounge seat with 430 mm seat height for relaxed reception seating
Back support	Continuous wraparound back provides 430 mm upper-body and lateral shoulder support
Arm support	Integrated upholstered arms provide continuous forearm and elbow support at about 600 mm floor height
Leg stance	Four outward-splayed metal legs provide a 640 mm front footprint to resist tipping
Cushion design	Removable-looking boxed seat cushion provides a 110 mm padded sitting surface
Floor protection	Four end glides allow use on tile, wood, or carpet while reducing floor marking
Maintenance access	250 mm under-shell clearance permits vacuuming and floor cleaning beneath the chair
Stacking or folding	Non-stacking, non-folding rigid chair structure
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Office reception	Suitable for reception and visitor waiting zones where one compact upholstered chair occupies 740 x 760 mm floor space
Executive lounge	Fits executive lounges and informal meeting corners due to its padded wraparound back and low integrated arms
Hotel seating	Suitable for hotel lobbies, guest floors, and bedroom seating areas with hard-floor glides and neutral two-tone finish
Residential living space	Can serve as an accent chair in a study, living room, or bedroom seating area
Meeting breakout area	Pairs with small side tables for short-duration collaborative or breakout seating
Senior care or consultancy room	Useful for visitor-side seating where a 430 mm seat height and arm support aid seated transfer
Recommended layout spacing	Maintain 350 mm rear access clearance and 450 mm side clearance for circulation and cleaning
Upholstery configuration	Use grouped pairs in taupe and charcoal to coordinate with wood, stone, or dark metal interior finishes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LUX-LG-740-TT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LUX-LG-740-TT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LUX-LG-740-TT打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Tone Upholstered Lounge Armchair with Splayed Metal Legs is a contemporary single-person seat with a compact, welcoming profile. Its overall form is 740 mm wide, 760 mm deep, and 790 mm high, anchored by four outward-splayed dark powder-coated steel tubes that produce a 640 mm front footprint. The chair presents a continuous wraparound back with integrated upholstered armrests, giving the seating area a smooth, enclosed silhouette. The upper back is covered in taupe smooth upholstery, while the front apron and lower arm panels use charcoal smooth upholstery, creating a restrained two-tone appearance suited to neutral interiors. Construction combines padded comfort with a structured load-bearing frame. The internal shell uses a 12 mm molded plywood or composite board with reinforcing blocks. The seat includes an 110 mm polyurethane foam cushion with a 35 kg/m3 density target, finished in charcoal upholstery with a perimeter stitched seam. The back has a 20 mm polyurethane foam layer over a shaped back board, with finished backrest padding of 70 mm and a 240 mm lumbar support zone. Each leg is a 25 mm diameter steel tube fitted with polymer or felt glides and secured using steel mounting plates and M8 frame screws. The fixed lounge seat has a 430 mm seat height and seating capacity for one person, with a recommended user weight capacity of 140 kg. The 540 mm clear width between armrests leaves open space at the seat, while the continuous arms provide forearm and elbow support at about 600 mm from the floor. The 430 mm wraparound back supports the upper body and lateral shoulders. A 250 mm under-shell clearance allows vacuuming and floor cleaning beneath the chair, and the glides support use on tile, wood, or carpet while reducing floor marking. This model is appropriate for office reception and visitor waiting zones, executive lounges, informal meeting corners, hotel lobbies and guest floors, residential studies or bedrooms, and breakout areas paired with small side tables. It is also useful for the visitor side of senior care or consultancy rooms where arm support and the specified seat height can assist seated transfer. For procurement, the chair is unbranded under model LUX-LG-740-TT and supplied as one set in two cartons. Packaged gross weight is 23 kg per set, carton volume is 0.26 cubic meters, and reference assembly time is 40 minutes. The indicative 20GP container load is 135 sets at 85 percent space utilization. Reference checks include a 180 kg back static load, 100,000-cycle seat impact durability, 20 N horizontal leg stability verification, and a 400 N upholstery seam strength target.

Two-Tone Upholstered Lounge Armchair with Splayed Metal Legs Specifications

供应商与现货